FSOT Datasheet

FSOT
www.vishay.com
Vishay Huntington
Wirewound Resistor, Industrial Power,
Silicone Coated, Standard Oval
FEATURES
• High temperature silicone coating
• Mounting accommodations ideally suited to
high density packaging
• Available in non-inductive style (special “NI”)
with Ayrton-Perry winding
• Self-stacking hardware
vertical placement
for
horizontal
or
• Mounting hardware functions as a heat sink allowing
greater heat dissipation and less derating of stacked units
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL
POWER RATING
P25 °C
W
HISTORICAL
MODEL
RESISTANCE
RANGE
Ω
RESISTANCE
RANGE
Ω
WEIGHT
(typical)
g
±5%
± 10 %
10
1.0 to 15K
1.0 to 1.8K
0.10 to 15K
1.0 to 1.8K
0.41
FSOT-15
FSOT-15-NI
15
1.0 to 26K
1.0 to 3.6K
0.10 to 26K
1.0 to 3.6K
0.47
FSOT20
FSOT20-NI
FSOT-20
FSOT-20-NI
20
1.0 to 71K
1.0 to 9.8K
0.10 to 71K
1.0 to 9.8K
0.74
FSOT30
FSOT30-NI
FSOT-30
FSOT-30-NI
30
1.0 to 11K
1.0 to 1.2K
0.10 to 11K
1.0 to 1.2K
20.14
FSOT40
FSOT40-NI
FSOT-40
FSOT-40-NI
40
1.0 to 26K
1.0 to 3K
0.10 to 26K
1.0 to 3K
30.07
FSOT55
FSOT55-NI
FSOT-55
FSOT-55-NI
55
1.0 to 54K
1.0 to 6.8K
0.10 to 54K
1.0 to 6.8K
51.25
FSOT65 / FSOT70 (1)
FSOT65-NI / FSOT70-NI (1)
FSOT-65
FSOT-65-NI
70
1.0 to 77K
1.0 to 9.4K
0.10 to 77K
1.0 to 9.4K
60.48
FSOT75 / FSOT95 (1)
FSOT75-NI / FSOT95-NI (1)
FSOT-75
FSOT-75-NI
95
1.0 to 99.9K
1.0 to 12.4K
0.10 to 99.9K
1.0 to 12.4K
76.51
FSOT10
FSOT10-NI
FSOT-10
FSOT-10-NI
FSOT15
FSOT15-NI
Note
(1) The preferred Models are the FSOT70 and FSOT95. FSOT65 and FSOT75 are being shown as they have historically been used for these
two wattages.
TECHNICAL SPECIFICATIONS
PARAMETER
Temperature Coefficient
Short Time Overload
UNIT
FSOT RESISTOR CHARACTERISTICS
ppm/°C
± 260 for 20 Ω and above, ± 400 for 1 Ω to 20 Ω,
special TC’s available
-
10 x rated power for 5 s
VAC
1000, from terminal to mounting hardware
Maximum Working Voltage
V
(P x R)1/2
Operating Temperature Range
°C
-55 to +350
Dielectric Withstanding Voltage
Revision: 12-Nov-15
Document Number: 31847
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FSOT
www.vishay.com
Vishay Huntington
GLOBAL PART NUMBER INFORMATION
Global Part Numbering example: FSOT5509E25R00JE (visit www.vishay.net SAP parts manual for all options)
F
S
O
GLOBAL MODEL
(6 digits)
T
5
5
0
TERMINAL
DESIGNATION
(2 digits)
TERMINAL
FINISH
(1 digit)
09
11
16
E = lead
(Pb)-free
(see Standard
Electrical
Specifications
Global Model
column for
options)
9
E
2
5
R
0
0
J
E
VALUE
(5 digits)
TOLERANCE
(1 digit)
PACKAGING CODE
(1 digit)
SPECIAL
(up to 2 digits)
R = decimal
K = thousand
1R500 = 1.5 Ω
1K500 = 1.5 kΩ
J=±5%
K = ± 10 %
E = lead (Pb)-free
cell and bulk pack
(dash number)
from 1 to 99 as
applicable
CT = center tap
NI = non-inductive
Historical Part Number example: FSOT-55-25-5 %
FSOT-20
25 Ω
5%
HISTORICAL MODEL
RESISTANCE VALUE
TOLERANCE
SPECIAL
DIMENSIONS in inches [millimeters]
FSOT10 / FSOT15 / FSOT30
FSOT30 / FSOT40 / FSOT55 / FSOT65 / FSOT70 / FSOT75 / FSOT95
Distance
center to center
Distance
center to center
MODEL
A
± 0.063
[1.59]
B
± 0.063
[1.59]
C
± 0.031
[0.79]
DISTANCE
CENTER TO
CENTER
(REF.)
FSOT10
0.750
[19.05]
1.312
[33.32]
1.000
[25.40]
FSOT15
1.000
[25.40]
1.562
[39.67]
FSOT20
2.062
[52.37]
FSOT30
TERMINAL DESIGNATION
STANDARD
OPTIONAL
(QUICK
CONNECT)
0.531
[13.49]
11
-
1.250
[31.75]
0.781
[19.84]
11
-
2.625
[66.68]
2.312
[58.72]
1.843
[46.81]
11
-
1.250
[31.75]
2.500
[63.50]
2.000
[50.8]
0.906
[23.01]
09
16
FSOT40
2.000
[50.8]
3.250
[82.55]
2.750
[69.85]
1.656
[42.06]
09
16
FSOT55
3.500
[88.90]
4.750
[120.65]
4.250
[107.95]
3.156
[80.16]
09
16
FSOT65 / FSOT70 (1)
4.750
[120.65]
6.000
[152.4]
5.500
[139.7]
4.406
[111.91]
09
16
FSOT75 / FSOT95 (1)
6.000
[152.4]
7.250
[184.15]
6.750
[171.45]
5.656
[143.66]
09
16
Note
(1) The preferred Models are the FSOT70 and FSOT95. FSOT65 and FSOT75 are being shown as they have historically been used for these
two wattages.
Revision: 12-Nov-15
Document Number: 31847
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FSOT
www.vishay.com
Vishay Huntington
TERMINAL DIMENSIONS
D
G
D
E
F
Style 09, 11
DIMENSIONS
G
E
Style 16
F
STYLE 09
STYLE 11
STYLE 16
D
0.188 [4.76]
0.125 [3.18]
0.188 [4.76]
E
(HOLE DIAMETER)
0.106 [2.69]
0.081 [2.10]
0.050 [1.27]
F
0.438 [11.13]
0.235 [5.97]
0.563 [14.30]
G
0.020 [0.51]
0.020 [0.51]
0.020 [0.51]
RATED POWER IN %
DERATING
120
100
80
60
40
20
0
- 65 - 50
0
50
150
250
350
25
AMBIENT TEMPERATURE IN °C
MATERIAL SPECIFICATIONS
NON-INDUCTIVE
Element: copper-nickel alloy or nickel-chrome alloy,
depending on resistance value
Models of equivalent physical and electrical specifications
are available with non-inductive (Ayrton-Perry) winding.
They are identified by adding the letters “NI” to the end of
the part number in the special section. For non-inductive
models the maximum resistance values are lower, see
Standard Electrical Specifications Table.
Core: ceramic, steatite
Coating: special high temperature silicone
Standard Terminals: tinned alloy 42
Optional Terminals (Quick Connect): alloy 42
Terminal Bands: alloy 42
Part Marking: HEI, model, wattage, value, tolerance, date
code
Revision: 12-Nov-15
Document Number: 31847
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000