FVTL, FVTS, FVWL www.vishay.com Vishay Huntington Wirewound Resistor, Industrial Power, Vitreous Coated, Tubular FEATURES • High temperature vitreous coating • Complete welded construction • Excellent for intermittent power and pulsing application • Available in non-inductive style (special “NI”) with Ayrton-Perry winding • Various lead and terminal options • Excellent stability in operation (< 3 % change resistance) • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL HISTORICAL MODEL POWER RATING P25 °C W RESISTANCE RANGE RESISTANCE RANGE ±5% ± 10 % WEIGHT (typical) g FVTL05 FVTL-5 5 1.0 to 20.5K 0.1 to 20.5K 4.60 FVTS05 FVTS-5 5 1.0 to 20.5K 0.1 to 20.5K 4.60 FVWL5A - 5.25 1.0 to 15K 0.1 to 15K 2.12 FVTL5A - 5.25 1.0 to 15K 0.1 to 15K 2.12 FVWL05 FVWL-5 8 1.0 to 20.5K 0.1 to 20.5K 4.60 FVWL08 - 8 1.0 to 20.5K 0.1 to 20.5K 4.60 FVTL08 - 8 1.0 to 20.5K 0.1 to 20.5K 4.60 FVWL1A - 10 1.0 to 29K 0.10 to 29K 6.24 FVTL10 FVTL-10 12 1.0 to 58K 0.10 to 58K 6.69 FVTS10 FVTS-10 12 1.0 to 58K 0.10 to 58K 6.69 FVWL10 FVWL-10 12 1.0 to 58K 0.10 to 58K 6.69 FVWL12 - 12 1.0 to 58K 0.10 to 58K 6.69 FVTL12 - 12 1.0 to 58K 0.10 to 58K 6.69 FVWL15 - 15 1.0 to 60K 0.10 to 60K 8.82 FVTL15 - 15 1.0 to 60K 0.10 to 60K 8.82 FVWL2A - 20 1.0 to 95K 0.10 to 95K 11.36 FVTL2A - 20 1.0 to 95K 0.10 to 95K 11.36 FVTL20 FVTL-20 20 1.0 to 95K 0.10 to 95K 12.57 FVTS20 FVTS-20 20 1.0 to 95K 0.10 to 95K 12.57 FVWL20 FVWL-20 20 1.0 to 95K 0.10 to 95K 12.57 TECHNICAL SPECIFICATIONS PARAMETER Temperature Coefficient Short Time Overload UNIT FVT RESISTOR CHARACTERISTICS ppm/°C ± 260 for 20 and above, ± 400 for 1 to 20 , special TC’s available please contact factory - 10 x rated power for 5 s VAC 1000, from terminal to mounting hardware Maximum Working Voltage V (P x R)1/2 Operating Temperature Range °C -55 to +350 Dielectric Withstanding Voltage Revision: 02-May-16 Document Number: 31837 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 FVTL, FVTS, FVWL www.vishay.com Vishay Huntington GLOBAL PART NUMBER INFORMATION Global Part Numbering example: FVTL05R2E25R00JE (visit www.vishay.net SAP parts manual for all options) F V T GLOBAL MODEL (6 digits) L 0 5 R TERMINAL DESIGNATION (2 digits) TERMINAL FINISH (1 digit) A1 A2 R1 R2 E = lead (Pb)-free (see Standard Electrical Specifications Global Model column for options) 2 E 2 5 R 0 0 J E VALUE (5 digits) TOLERANCE (1 digit) PACKAGING CODE (1 digit) SPECIAL (up to 2 digits) R = decimal K = thousand 1R500 = 1.5 1K500 = 1.5 k J=±5% K = ± 10 % E = lead (Pb)-free cell and bulk pack (dash number) from 1 to 99 as applicable NI = non-inductive Historical Part Number example: FVTL-5-25-5 % FVTL-5 25 5% HISTORICAL MODEL RESISTANCE VALUE TOLERANCE SPECIAL RATED POWER IN % DERATING 120 100 80 60 40 20 0 - 55 - 50 0 50 150 250 350 25 AMBIENT TEMPERATURE IN °C MATERIAL SPECIFICATIONS NON-INDUCTIVE Element: copper-nickel alloy or nickel-chrome alloy, depending on resistance value Models of equivalent physical and electrical specifications are available with non-inductive (Ayrton-Perry) winding. They are identified by adding the letters “NI” to the end of the part number in the special section. For non-inductive models the maximum resistance values are lower. Core: ceramic, steatite Coating: special high temperature vitreous Standard Terminals: tinned alloy 42 Terminal Bands: alloy 42 Part Marking: HEI, model, wattage, value, tolerance, date code Revision: 02-May-16 Document Number: 31837 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 FVTL, FVTS, FVWL www.vishay.com Vishay Huntington DIMENSIONS in inches [millimeters] CORE DIMENSIONS (REF.) TERMINAL A B C D ± 0.005 [± 0.12] 0.313 [7.94] 0.313 [7.94] 0.188 [4.76] 0.188 [4.76] 1.000 [25.40] 1.000 [25.40] 0.188 [4.78] 0.188 [4.78] FVWL5A 0.250 [6.35] 0.125 [3.18] 0.625 [15.88] 0.063 [1.59] FVTL5A 0.250 [6.35] 0.125 [3.18] 0.625 [15.88] 0.063 [1.59] 0.313 [7.94] 0.313 [7.94] 0.313 [7.94] 0.188 [4.76] 0.188 [4.76] 0.188 [4.76] 1.000 [25.40] 1.000 [25.40] 1.000 [25.40] 0.125 [3.175] 0.125 [3.175] 0.125 [3.175] 0.438 [11.11] 0.313 [7.94] 1.000 [25.40] 0.125 [3.18] FVWL10 0.313 [7.94] 0.313 [7.94] 0.313 [7.94] 0.188 [4.76] 0.188 [4.76] 0.188 [4.76] 1.750 [44.45] 1.750 [44.45] 1.750 [44.45] 0.188 [4.78] 0.188 [4.78] 0.125 [3.175] FVWL12 0.313 [7.94] 0.188 [4.76] 1.750 [44.45] 0.125 [3.175] FVTL12 0.313 [7.94] 0.188 [4.76] 1.750 [44.45] 0.125 [3.175] FVWL15 0.438 [11.11] 0.313 [7.94] 1.500 [38.10] 0.125 [3.18] FVTL15 0.438 [11.11] 0.313 [7.94] 1.500 [38.10] 0.125 [3.18] FVWL2A 0.438 [11.11] 0.260 [6.604] 2.000 [50.8] 0.125 [3.18] FVTL2A 0.438 [11.11] 0.313 [7.94] 2.000 [50.80] 0.125 [3.18] 0.438 [11.11] 0.438 [11.11] 0.438 [11.11] 0.260 [6.604] 0.260 [6.604] 0.260 [6.604] 2.000 [50.8] 2.000 [50.8] 2.000 [50.8] 0.188 [4.78] 0.188 [4.78] 0.125 [3.175] MODEL FVTL05 FVTS05 FVWL05 FVWL08 FVTL08 FVWL1A FVTL10 FVTS10 FVTL20 FVTS20 FVWL20 Revision: 02-May-16 E ± 0.015 [± 0.38] F ± 0.005 [± 0.12] 0.406 [10.31] 0.406 [10.31] 0.188 [4.76] typ. 0.188 [4.76] typ. 0.188 [4.78] 0.188 [4.78] 0.188 [4.78] 0.188 [4.76] typ. 0.406 [10.31] 0.406 [10.31] 0.188 [4.78] 0.188 [4.76] typ. 0.188 [4.76] typ. 0.188 [4.76] typ. 0.188 [4.76] typ. 0.188 [4.76] typ. 0.188 [4.76] typ. 0.406 [10.32] 0.406 [10.32] 0.188 [4.78] 0.132 [3.35] 0.132 [3.35] LEADS DESIGNATION R2 R2 G ± 0.002 [± 0.05] H ± 0.125 [± 3.18] 0.032 [0.813] 0.032 [0.813] 2.90 [73.66] 1.50 [38.10] BRACKET TYPE 209 209 n/a A2 0.032 [0.813] 1.50 [38.10] - n/a R2 0.032 [0.813] 1.50 [38.10] - - A2 n/a R1 n/a A1 0.032 [0.813] 0.040 [1.20] 0.040 [1.20] 1.50 [38.10] 1.50 [38.10] 1.50 [38.10] n/a A1 0.040 [1.02] 1.50 [38.10] 2.90 [73.66] 1.50 [38.10] 1.50 [38.10] 209 0.132 [3.35] 0.132 [3.35] 209 - - A1 0.040 [1.02] 0.040 [1.02] 0.040 [1.02] n/a A1 0.040 [1.02] 1.50 [38.10] - n/a R1 0.040 [1.02] 1.50 [38.10] - n/a A1 0.040 [1.02] 1.50 [38.10] - n/a R1 0.040 [1.02] 1.50 [38.10] - - A1 0.040 [1.02] 1.50 [38.10] - 0.133 [3.37] R1 0.040 [1.02] 1.65 [41.91] - 0.040 [1.02] 0.040 [1.02] 0.040 [1.02] 1.65 [41.91] 1.50 [38.10] 1.50 [38.10] 0.133 [3.37] 0.133 [3.37] - R1 R1 R1 R1 A1 209 209 203 203 203 Document Number: 31837 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000