TD www.vishay.com Vishay Techno Thick Film Planar Dividers, Through-Hole, High Voltage FEATURES APPLICATIONS Applications include power supplies, transformers and any application requiring operation within an environment where high voltages are used. • 30 000 V capability • Very low voltage coefficient to less than 1 ppm/V Available • Outstanding stability under adverse conditions • Stable cermet resistive elements bonded to a high-purity alumina substrate • Tough epoxy-based coating and high voltage stability Available • Custom designs built from customer supplied schematics available • Custom dividers available with leadwire terminals or with leadless conductive pads • Maximum resistance ratio of 1000:1 (for ratio’s over 1000:1, contact factory) • TCR tracking to ± 25 ppm/°C • Resistors available, see Vishay Techno’s TR datasheet (www.vishay.com/doc?68000) • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details. STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL / SIZE POWER RATING P25 °C W TDA03 MAXIMUM WORKING VOLTAGE (1) V 0.8K 0.25 TDX03 2.5K TDA05 4K 0.5 TDX05 5K TDA10 6.5K 1 TDX10 10K TDA15 12.5K 1.5 TDX15 15K TDA20 17.5K 2 TDX20 20K TDA30 25K 3 TDX30 30K RESISTANCE RANGE R1 (2)(3) Ω 300 to 3M 3.01M to 25M 25M to 250M 260M to 2G 2.1G to 10G 500 to 25M 25.1M to 200M 30M to 1G 1.1G to 20G 21G to 100G 1K to 16M 16.1M to 120M 20M to 1G 1.1G to 15G 16G to 1T 1.5K to 45M 45.1M to 340M 60M to 1G 1.1G to 35G 36G to 1.5T 2K to 64M 64.1M to 480M 80M to 1G 1.1G to 50G 51G to 2T 3K to 82M 82.1M to 620M 80M to 1G 1.1G to 60G 61G to 3T ABSOLUTE TOLERANCE ±% 0.5, 1, 2, 5, 10, 20 0.5, 1, 2, 5, 10, 20 1, 2, 5, 10, 20 5, 10, 20 5, 10, 20 0.5, 1, 2, 5, 10, 20 0.5, 1, 2, 5, 10, 20 1, 2, 5, 10, 20 5, 10, 20 5, 10, 20 0.5, 1, 2, 5, 10, 20 0.5, 1, 2, 5, 10, 20 1, 2, 5, 10, 20 5, 10, 20 5, 10, 20 0.5, 1, 2, 5, 10, 20 0.5, 1, 2, 5, 10, 20 1, 2, 5, 10, 20 5, 10, 20 5, 10, 20 0.5, 1, 2, 5, 10, 20 0.5, 1, 2, 5, 10, 20 1, 2, 5, 10, 20 5, 10, 20 5, 10, 20 0.5, 1, 2, 5, 10, 20 0.5, 1, 2, 5, 10, 20 1, 2, 5, 10, 20 5, 10, 20 5, 10, 20 ABSOLUTE TEMPERATURE COEFFICIENT ± ppm/°C 100 200 200 200 500 100 200 200 200 500 100 200 200 200 500 100 200 200 200 500 100 200 200 200 500 100 200 200 200 500 RATIO TOLERANCE ±% TCR TRACKING (4) ± ppm/°C RATIO MAX. (5) 0.5, 1, 2, 5 0.5, 1, 2, 5 1, 2, 5 1, 2, 5 1, 2, 5 0.5, 1, 2, 5 0.5, 1, 2, 5 1, 2, 5 1, 2, 5 1, 2, 5 0.5, 1, 2, 5 0.5, 1, 2, 5 1, 2, 5 1, 2, 5 1, 2, 5 0.5, 1, 2, 5 0.5, 1, 2, 5 1, 2, 5 1, 2, 5 1, 2, 5 0.5, 1, 2, 5 0.5, 1, 2, 5 1, 2, 5 1, 2, 5 1, 2, 5 0.5, 1, 2, 5 0.5, 1, 2, 5 1, 2, 5 1, 2, 5 1, 2, 5 25, 50, 100 25, 50, 100 25, 50, 100 25, 50, 100 25, 50, 100 25, 50, 100 25, 50, 100 25, 50, 100 25, 50, 100 25, 50, 100 25, 50, 100 25, 50, 100 25, 50, 100 25, 50, 100 25, 50, 100 25, 50, 100 25, 50, 100 25, 50, 100 25, 50, 100 25, 50, 100 25, 50, 100 25, 50, 100 25, 50, 100 25, 50, 100 25, 50, 100 25, 50, 100 25, 50, 100 25, 50, 100 25, 50, 100 25, 50, 100 1000:1 1000:1 1000:1 1000:1 1000:1 1000:1 1000:1 1000:1 1000:1 1000:1 1000:1 1000:1 1000:1 1000:1 1000:1 1000:1 1000:1 1000:1 1000:1 1000:1 1000:1 1000:1 1000:1 1000:1 1000:1 1000:1 1000:1 1000:1 1000:1 1000:1 Notes • Custom sizes available • Voltage coefficient: typically less than 1 ppm/V (tested per MIL-STD-202) (1) Continuous working voltage shall be P x R or maximum working voltage, whichever is less. (2) All resistance values are calibrated at 100 V . Calibration at other voltages available upon request. DC (3) Minimum R value is 50 Ω. 2 (4) TCR Tracking measured from 0°C to +70°C (5) For ratios over 1000:1, contact factory. Revision: 15-Jan-16 Document Number: 68042 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TD www.vishay.com Vishay Techno GLOBAL PART NUMBER INFORMATION New Global Part Numbering: TDA20E100M3300FFEB T D A 2 0 E 1 0 0 M 3 3 0 0 F F E B GLOBAL MODEL VOLTAGE RATING SIZE TCR TRACKING RESISTANCE VALUE R1 RATIO R1/R2 RATIO TOLERANCE TOLERANCE TERMINAL FINISH PACKAGING TD A= medium voltage X= high voltage 03 05 10 15 20 30 E= 25 ppm H= 50 ppm K= 100 ppm R=Ω K = kΩ M = MΩ G = GΩ T = TΩ 400R = 400 Ω 10M0 = 10 MΩ 10G7 = 10.7 GΩ 3 digit significant figure, followed by a multiplier 0010 = 1:1 0400 = 40:1 2210 = 221:1 1001 = 1000:1 D = ± 0.5 % F=±1% G=±2% J=±5% D = ± 0.5 % F=±1% G=±2% J=±5% K = ± 10 % M = ± 20 % E= Sn100 R= Sn60/Pb40 B = bag Note • For additional information on packaging, refer to the Through Hole Resistor Packaging document (www.vishay.com/doc?31544). MECHANICAL SPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS Resistive Element: thick film Substrate: 96 % pure alumina Encapsulation: epoxy base, conformal coating Terminals: solder plated copper leads Terminal Strength: 4.5 pounds pull-test Power: derated from ambient temperature +25 °C Temperature Range: -55 °C to +125 °C (for higher temperature range, consult factory) Load Life: less than 0.15 %, 1000 h DIMENSIONS in inches (millimeters) Schematic Pin #1 R1 R2 0.125 (3.18) Max. A B Pin #1 1.25 (31.75) Min. D C MODEL TDA03, TDX03 TDA05, TDX05 TDA10, TDX10 TDA15, TDX15 TDA20, TDX20 TDA30, TDX30 Revision: 15-Jan-16 A (LENGTH) B (HEIGHT) 0.300 ± 0.030 (7.62 ± 0.76) 0.500 ± 0.050 (12.70 ± 1.27) 1.00 ± 0.100 (25.40 ± 2.54) 1.50 ± 0.150 (38.10 ± 3.81) 2.00 ± 0.200 (50.80 ± 5.08) 3.00 ± 0.300 (76.20 ± 7.62) 0.210 ± 0.021 (5.33 ± 0.53) 0.300 ± 0.030 (7.62 ± 0.76) 0.350 ± 0.035 (8.89 ± 0.89) 0.350 ± 0.035 (8.89 ± 0.89) 0.350 ± 0.035 (8.89 ± 0.89) 0.400 ± 0.040 (10.16 ± 1.02) E D C (OVERALL LEAD SPACING) 0.200 ± 0.020 (5.08 ± 0.51) 0.400 ± 0.040 (10.16 ± 1.02) 0.900 ± 0.090 (22.86 ± 2.29) 1.40 ± 0.140 (35.56 ± 3.56) 1.90 ± 0.190 (48.26 ± 4.83) 2.90 ± 0.290 (73.66 ± 7.37) D (LEAD DIA.) E (R2 LEAD SPACING) 0.025 ± 0.002 (0.64 ± 0.05) 0.025 ± 0.002 (0.64 ± 0.05) 0.032 ± 0.002 (0.81 ± 0.05) 0.032 ± 0.002 (0.81 ± 0.05) 0.032 ± 0.002 (0.81 ± 0.05) 0.032 ± 0.002 (0.81 ± 0.05) 0.100 ± 0.010 (2.54 ± 0.25) 0.100 ± 0.010 (2.54 ± 0.25) 0.200 ± 0.020 (5.08 ± 0.51) 0.200 ± 0.020 (5.08 ± 0.51) 0.200 ± 0.020 (5.08 ± 0.51) 0.200 ± 0.020 (5.08 ± 0.51) Document Number: 68042 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TD www.vishay.com Vishay Techno % OF RATED POWER DERATING 120 100 80 60 40 20 0 0 25 50 75 100 125 150 175 AMBIENT TEMPERATURE °C Revision: 15-Jan-16 Document Number: 68042 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000