FHV Radial www.vishay.com Vishay Techno Thick Film Planar Resistors, Through-Hole, Radial Lead, High Voltage FEATURES • Non-inductive design • Matched sets available • Ratio dividers available, see Vishay Techno’s TR, TD datasheet • Special testing available • Low TCR: ± 200 ppm/°C standard, ± 100 ppm/°C available • Tolerance: ± 10 %, ± 5 %, ± 2 %, ± 1 % standard • Tolerance and/or TCR matching available upon request • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 MECHANICAL SPECIFICATIONS Terminal Strength: 5 pound pull test Solderability: Continuous satisfactory coverage when tested in accordance with MIL-R-10509 MATERIAL SPECIFICATIONS Note * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. Element: High temperature fired cermet film Core: High purity 96 % alumina Coating: Conformal coat epoxy Termination: Standard lead material is tin plated copper TEMPERATURE COEFFICIENT CODE CODE K N TEMPERATURE COEFFICIENT ± 100 ppm/°C ± 200 ppm/°C RANGE - 55 °C to + 125 °C - 55 °C to + 125 °C STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL / SIZE FHV025 POWER RATING P125 °C P70 °C W W 0.25 0.125 MAXIMUM WORKING VOLTAGE (1) V RESISTANCE RANGE (2) TOLERANCE ±% TEMPERATURE COEFFICIENT ± ppm/°C 750 10K to 100M 10K to 100M 10K to 500M 500 to 500M 100 to 1G 500 to 1G 100 to 1G 1.1G to 2G 1M to 1G 10K to 1G 1.1G to 2G 500 to 1G 100 to 1G 1.1G to 2G 500M to 1G 200 to 1G 1.1G to 8G 1M to 1G 20K to 1G 1.1G to 2G 1M to 1G 30K to 1G 1.1G to 10G 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 5, 10 1, 2, 5, 10 1, 2, 5, 10 5, 10 1, 2, 5, 10 1, 2, 5, 10 5, 10 1, 2, 5, 10 1, 2, 5, 10 5, 10 1, 2, 5, 10 1, 2, 5, 10 5, 10 1, 2, 5, 10 1, 2, 5, 10 5, 10 100, 200 100 200 100 200 100 200 200 100 200 200 100 200 200 100 200 200 100 200 200 100 200 200 FHV050 0.50 0.25 1.5K FHV075 0.25 0.125 3.75K FHV100 1 0.50 7.5K FHV150 1.5 0.75 11.25K FHV160 1 0.50 3.5K FHV200 2 1 15K FHV400 2 1 7.5K FHV500 4 2 15K Notes (1) Continuous working voltage shall be P x R or maximum working voltage, whichever is less. (2) All resistance values are calibrated at 100 V . Calibration at other voltages upon request. DC Revision: 03-May-13 Document Number: 68001 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 FHV Radial www.vishay.com Vishay Techno GLOBAL PART NUMBER INFORMATION New Global Part Numbering: FHV02510K0FNEB (preferred part number format) F H GLOBAL MODEL FHV V 0 2 5 1 0 K 0 F N E B SIZE RESISTANCE VALUE TOLERANCE TCR TERMINAL FINISH PACKAGING 025 050 075 100 150 160 200 400 500 R= K = k M = M G = G 400R = 400 10M0 = 10 M 10G0 = 10 G F = ± 1.0 % G = ± 2.0 % J = ± 5.0 % K = ± 10.0 % K = 100 ppm N = 200 ppm E = Sn100 R = Sn60/Pb40 B = Bag S = Strip Historical Part Numbering: FHV0251002FMe3 (will continue to be accepted) FHV 025 1002 F M e3 HISTORICAL MODEL SIZE RESISTANCE VALUE TOLERANCE TCR TERMINAL FINISH Note • For additional information on packaging, refer to the Through Hole Resistor Packaging document (www.vishay.com/doc?31544). DIMENSIONS in inches (millimeters) Figure 2 Figure 1 B 0.125 (3.18) max. B 0.125 (3.18) max. A A 0.080 (2.03) Ref. 0.050 (1.27) Ref. ± 0.002 E (0.051) C A (max.) (Height) C ± 0.032 (0.813) E 0.010 (0.25) B (max.) (Length) C (Lead Spacing) E ± 0.002 (0.051) Dia. D (Lead Length) E (Lead DIA) FIGURE FHV025 0.300 (7.62) 0.300 (7.62) 0.200 (5.08) 0.250 (6.35) 0.018 (0.457) 1 FHV050 0.380 (9.65) 0.380 (9.65) 0.200 (5.08) 0.360 (9.14) 0.020 (0.508) 1 FHV075 0.210 (5.33) 0.570 (14.48) 0.400 (10.16) 1.50 (38.10) 0.025 (0.635) 2 FHV100 0.280 (7.11) 1.07 (27.18) 0.900 (22.86) 1.50 (38.10) 0.032 (0.813) 2 FHV150 0.330 (8.38) 1.57 (39.88) 1.40 (35.56) 1.50 (38.10) 0.032 (0.813) 2 FHV160 0.550 (13.97) 0.550 (13.97) 0.400 (10.16) 1.50 (38.10) 0.032 (0.813) 2 FHV200 0.330 (8.38) 2.04 (51.82) 1.90 (48.26) 1.50 (38.10) 0.032 (0.813) 2 FHV400 0.550 (13.97) 1.05 (26.67) 0.900 (22.86) 1.50 (38.10) 0.032 (0.813) 2 FHV500 0.550 (13.97) 2.07 (52.58) 1.90 (48.26) 1.50 (38.10) 0.032 (0.813) 2 ENVIRONMENTAL PERFORMANCE TEST MAXIMUM R (Typical Test Lots) Short time overload < ± 0.2 % Moisture resistance < ± 0.5 % Shock < ± 0.2 % Vibration < ± 0.2 % Temperature cycling < ± 0.5 % Load life < ± 1.0 % Dielectric withstanding voltage < ± 0.15 % Resistance to soldering heat < ± 0.1 % Revision: 03-May-13 DERATING % OF RATED POWER MODEL - SIZE ± 0.100 D (2.54) D ± 0.100 (2.54) 100 80 60 40 20 0 25 75 125 175 225 275 AMBIENT TEMPERATURE IN °C Document Number: 68001 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 FHV Radial www.vishay.com Vishay Techno AVERAGE VOLTAGE COEFFICIENT ppm/V VOLTAGE COEFFICIENT 0 -5 - 10 - 15 106 107 108 025 RESISTANCE () Revision: 03-May-13 109 050 1010 160 400 100 200 150 500 Document Number: 68001 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000