RCWPM Jumper (Military M32159) www.vishay.com Vishay Dale Thick Film Chip Resistors, Zero Ohm Jumper, Military/Established Reliability MIL-PRF-32159 Qualified, Type RCZ FEATURES • Fully conforms to the requirements of MIL-PRF-32159 • Established reliability - verified failure rate; M and T levels • 100 % group A screening per MIL-PRF-32159 • Termination style B - tin/lead wraparound over nickel barrier • Operating temperature range is -55 °C to +150 °C • For MIL-PRF-55342 chip resistors, see Vishay Dale’s RCWPM (Military M/D55342) datasheet (www.vishay.com/doc?31010) • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 STANDARD ELECTRICAL SPECIFICATIONS VISHAY DALE MODEL MIL-PRF-32159 STYLE MIL SPEC. SHEET RCWPM-0502-99, RCZ0502 01 RCWPM-0502-5 RCWPM-550-99, RCZ0505 02 RCWPM-550-5 RCWPM-5100-99, RCZ1005 03 RCWPM-5100-5 RCWPM-5150-99, RCZ1505 04 RCWPM-5150-5 RCWPM-7225-99, RCZ2208 05 RCWPM-7225-5 RCWPM-575-99, RCZ0705 06 RCWPM-575-5 RCWPM-1206-99, RCZ1206 07 RCWPM-1206-5 RCWPM-2010-99, RCZ2010 08 RCWPM-2010-5 RCWPM-2512-99, RCZ2512 09 RCWPM-2512-5 RCWPM-1100-99, RCZ1010 10 RCWPM-1100-5 RCWPM-0402-99, RCZ0402 11 RCWPM-0402-5 RCWPM-0603-99, RCZ0603 12 RCWPM-0603-5 RCWPM-0302-99, RCZ0302 13 RCWPM-0302-5 Notes • DSCC has created a series of drawings to support the need drawings as follows: (1) CASE SIZE POWER RATING P70 °C W CURRENT RATING A MAXIMUM RESISTANCE B 0502 0.05 1.3 30m B 0505 0.100 2.2 20m B 1005 0.20 2.8 25m B 1505 0.15 2.1 35m B 2208 0.225 2.5 35m B 0705 (1) 0.15 2.7 20m B 1206 0.25 3.2 25m B 2010 0.80 5.7 25m B 2512 1.0 6.3 25m B 1010 0.50 5.0 20m B 0402 0.04 1.2 30m B 0603 0.07 1.5 30m B 0302 0.035 1.1 30m TERM. for zero ohm jumper product. Vishay Dale is listed as a resource on these MAXIMUM MAX. CURRENT MAXIMUM WORKING DSCC VISHAY DALE TERM. RESISTANCE RATING VOLTAGE DRAWING MODEL m A V NUMBER 03011 RCWPM0201..99 B 50 0.5 30 03012 RCWPM0302..99 B 20 1.1 15 03014 RCWPM0402..99 B 25 1.2 30 88032 RCWPM0502..99 B 20 1.3 40 03013 RCWPM0603..99 B 25 1.5 50 03002 RCWPM0550..99 B 25 2.2 40 90048 RCWPM0575..99 B 20 2.7 50 90049 RCWPM5100..99 B 30 2.8 75 94011 RCWPM1206..99 B 20 3.2 100 90092 RCWPM5150..99 B 40 2.1 125 87011 RCWPM1100..99 B 20 5.0 75 90047 RCWPM7225..99 B 40 2.5 175 03015 RCWPM2010..99 B 40 5.7 150 03016 RCWPM2512..99 B 40 6.3 200 These drawings can be viewed at: www.landandmaritime.dla.mil/Programs/MilSpec/ListDwgs.aspx?DocTYPE=DSCCdwg. MIL case size 0705 and EIA case size 0805 are dimensionally the same. Revision: 15-Mar-16 Document Number: 31028 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RCWPM Jumper (Military M32159) www.vishay.com Vishay Dale GLOBAL PART NUMBER INFORMATION Part Number (MIL-PRF-32159): M32159B02MWB (preferred part number format) M 3 2 1 5 9 B 0 2 MIL STYLE TERMINATION STYLE SPEC SHEET FAILURE RATE M32159 B = pre-tinned nickel barrier, wraparound (see Standard Electrical Specifications table) C = non-ER M = military grade, high reliability T = space level M W B PACKAGING (1) SPECIAL TP = tin / lead, T/R (full), plastic tape blank = standard (dash number) TN = tin / lead, T/R (full), w/ESD (up to 3 digits) S3 = tin / lead, T/R (1000 pieces) 5 = space level SV = tin / lead, T/R (1000 pieces), 96 = part w/ESD marked (2) UL = tin / lead, T/R, single lot date code 7 = space level WB = tin / lead, waffle tray w/part marking (2) WA = tin / lead, waffle tray, w/ESD WL = tin / lead, waffle tray, single lot date code S2 = tin / lead, T/R (500 pieces) SU = tin / lead, T/R (500 pieces), w/ESD S6 = tin / lead, T/R (300 pieces) ST = tin / lead, T/R (300 pieces), w/ESD Part Number (DSCC Drawings): RCWPM5100WB99 R C W P M 5 1 0 0 W B 9 9 GLOBAL MODEL PACKAGING (3) SPECIAL RCWPM0201 RCWPM0302 RCWPM0402 RCWPM0502 RCWPM0550 RCWPM0575 RCWPM0603 RCWPM1100 RCWPM1206 RCWPM2010 RCWPM2512 RCWPM5100 RCWPM5150 RCWPM7225 TP = tin / lead, T/R (full), plastic tape S3 = tin / lead, T/R (1000 pieces), plastic tape UL = tin / lead, T/R, single lot date code WB = tin / lead, waffle tray WL = tin / lead, waffle tray, single lot date code S2 = tin / lead, T/R (500 pieces), plastic tape S6 = tin / lead, T/R (300 pieces), plastic tape UA = tin / lead, T/R (full), paper tape UD = tin / lead T/R (1000 pieces), paper tape UC = tin / lead, T/R (500 pieces), paper tape UB = tin / lead, T/R (300 pieces), paper tape 99 = 0 jumper Notes • For additional information on packaging, refer to the Surface Mount Resistor Packaging document (www.vishay.com/doc?31543). (1) Products with space level failure rates are only offered in packaging codes with ESD overpack and labeling. For all other failure rates, the ESD pack codes are an optional type of packaging. (2) Optional MIL spec part marking is not offered for the slash sheet 01, 02, 11, and 13 sizes. (3) Tape and Reel packaging with plastic tape standard for all case sizes except 0201. For the 0201 case size, the product is only offered in Tape and Reel packaging with paper tape. Revision: 15-Mar-16 Document Number: 31028 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RCWPM Jumper (Military M32159) www.vishay.com Vishay Dale DIMENSIONS in inches (millimeters) D C B A MIL. MIL-PRF-32159 SPEC. STYLE SHEET VISHAY DALE MODEL E A (LENGTH) B (WIDTH) C (HEIGHT) D (TOP TERM) E (BOTTOM TERM) RCWPM-0502 RCZ0502 01 0.055 ± 0.005 (1.40 ± 0.13) 0.023 ± 0.003 (0.58 ± 0.08) 0.015 ± 0.003 (0.38 ± 0.08) 0.010 ± 0.005 (0.25 ± 0.13) 0.015 ± 0.005 (0.38 ± 0.13) RCWPM-550 RCZ0505 02 0.055 ± 0.005 (1.40 ± 0.13) 0.050 ± 0.005 (1.27 ± 0.13) 0.020 ± 0.005 (0.51 ± 0.13) 0.010 ± 0.005 (0.25 ± 0.13) 0.015 ± 0.005 (0.38 ± 0.13) RCWPM-5100 RCZ1005 03 0.105 ± 0.005 (2.67 ± 0.13) 0.050 ± 0.005 (1.27 ± 0.13) 0.020 ± 0.005 (0.51 ± 0.13) 0.015 ± 0.005 (0.38 ± 0.13) 0.015 ± 0.005 (0.38 ± 0.13) RCWPM-5150 RCZ1505 04 0.155 ± 0.005 (3.94 ± 0.13) 0.050 ± 0.005 (1.27 ± 0.13) 0.020 ± 0.005 (0.51 ± 0.13) 0.015 ± 0.005 (0.38 ± 0.13) 0.015 ± 0.005 (0.38 ± 0.13) RCWPM-7225 RCZ2208 05 0.230 ± 0.005 (5.84 ± 0.13) 0.075 ± 0.005 (1.91 ± 0.13) 0.020 ± 0.005 (0.51 ± 0.13) 0.020 ± 0.005 (0.51 ± 0.13) 0.020 ± 0.005 (0.51 ± 0.13) RCWPM-575 RCZ0705 06 0.080 ± 0.005 (2.03 ± 0.13) 0.050 ± 0.005 (1.27 ± 0.13) 0.020 ± 0.005 (0.51 ± 0.13) 0.016 ± 0.008 (0.41 ± 0.20) 0.015 ± 0.005 (0.38 ± 0.13) RCWPM-1206 RCZ1206 07 0.125 ± 0.005 (3.18 ± 0.13) 0.063 ± 0.005 (1.60 ± 0.13) 0.020 ± 0.005 (0.51 ± 0.13) 0.015 ± 0.005 (0.38 ± 0.13) 0.015 ± 0.005 (0.38 ± 0.13) RCWPM-2010 RCZ2010 08 0.197 ± 0.006 (5.00 ± 0.15) 0.098 ± 0.005 (2.49 ± 0.13) 0.020 ± 0.005 (0.51 ± 0.13) 0.020 ± 0.005 (0.51 ± 0.13) 0.020 ± 0.005 (0.51 ± 0.13) RCWPM-2512 RCZ2512 09 0.250 ± 0.006 (6.35 ± 0.15) 0.124 ± 0.005 (3.15 ± 0.13) 0.020 ± 0.005 (0.51 ± 0.13) 0.020 ± 0.005 (0.51 ± 0.13) 0.020 ± 0.005 (0.51 ± 0.13) RCWPM-1100 RCZ1010 10 0.105 ± 0.005 (2.67 ± 0.13) 0.100 ± 0.005 (2.54 ± 0.13) 0.020 ± 0.005 (0.51 ± 0.13) 0.015 ± 0.005 (0.38 ± 0.13) 0.015 ± 0.005 (0.38 ± 0.13) RCWPM-0402 RCZ0402 11 0.039 ± 0.003 (0.99 ± 0.08) 0.020 ± 0.003 (0.51 ± 0.08) 0.013 ± 0.003 (0.33 ± 0.08) 0.010 ± 0.005 (0.25 ± 0.13) 0.010 ± 0.005 (0.25 ± 0.13) RCWPM-0603 RCZ0603 12 0.063 ± 0.005 (1.60 ± 0.13) 0.032 ± 0.005 (0.81 ± 0.13) 0.018 ± 0.005 (0.46 ± 0.13) 0.012 ± 0.005 (0.30 ± 0.13) 0.015 ± 0.005 (0.38 ± 0.13) RCWPM-0302 RCZ0302 13 0.034 ± 0.004 (0.86 ± 0.10) 0.021 ± 0.003 (0.53 ± 0.08) 0.013 ± 0.003 (0.33 ± 0.08) 0.007 ± 0.005 (0.18 ± 0.13) 0.008 ± 0.005 (0.20 ± 0.13) 0.024 ± 0.002 (0.61 ± 0.05) 0.012 ± 0.002 (0.30 ± 0.05) 0.009 ± 0.002 (0.23 ± 0.05) 0.006 ± 0.003 (0.15 ± 0.08) 0.006 + 0.002 - 0.004 (0.15 + 0.05 - 0.10) RCWPM-0201 Rated Power in % DERATING CURVE 120 100 80 CAGE CODE: 91637 and 2799A (formerly SH903) 60 40 20 0 - 55 - 25 0 25 50 75 100 125 150 175 70 Ambient Temperature in °C MATERIAL SPECIFICATIONS Resistive element Encapsulation Substrate Conductive metal Epoxy 96 % alumina Termination Solder-coated nickel barrier Solder finish Tin/lead solder alloy Revision: 15-Mar-16 Document Number: 31028 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000