V i s h ay I n t e rt e c h n o l o g y, I n c . Passives - Military and Aerospace Selector Guide AND TEC I INNOVAT O L OGY Applications N HN Military and Aerospace O 19 62-2012 Military- and Space-Qualified Passive Components Selector Guide TABLE OF CONTENTS Introduction..........................................................................................................................02 Resistors...............................................................................................................................03 Capacitors............................................................................................................................14 Magnetics/Inductors............................................................................................................19 One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components selector guide 1/20 VMN-SG2090-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n t e rt e c h n o l o g y, I n c . Passives - Military and Aerospace Selector Guide I INNOVAT AND TEC O L OGY Applications N HN Military and Aerospace O 19 62-2012 Introduction Vishay’s line of high-reliability products reflects a long-term commitment to our military and aerospace customers. As one of the largest suppliers of military components, we continually strive to meet the changing application requirements of the defense market by developing new products and manufacturing technologies on an ongoing basis. Vishay has one of the broadest lines of military-qualified resistors, capacitors, and inductors in the industry, and our high-reliability devices can be found in nearly every existing military and aerospace program, including aircraft, satellites, missiles, weapons, ground vehicles, and ships. Our precision potentiometers have been used for over 20 years in three different missile programs and are also used in passenger jets. Able to meet the most demanding application specifications, our high-reliability products are qualified to the relevant CECC, EN, ESCC or MIL specifications. For example, our high-reliability inductors are qualified to MIL-T-27E, MIL-C15305E, and MIL-C-39010D specifications. Our high-reliability resistive components are qualified to ESCC 4001/022, MILPRF-39007, MIL-PRF-39009, MIL-PRF-39017, MIL-PRF 55182, MIL-PRF-55342, MIL-PRF-83401, and many other highreliability specifications. Our high-reliability capacitors are qualified to MIL-PRF-39003, MIL-PRF-39006, MIL-PRF-55365, and MIL-PRF-55681. In addition to standard military-grade products, Vishay is equipped to design and produce custom components to meet any design and reliability demands. Our MLCC capacitor group offers products to source-controlled specifications with customer specific requirements such as capacitance tolerances. Our custom magnetic group produces many custom inductors and transformers for applications as diverse as missile systems and groundbased communications systems. And our resistor groups produce many resistive products designed to meet various military source-controlled drawings. Every component Vishay provides to the military and aerospace markets is backed by the comprehensive testing and failure analysis capabilities of our own technical staff, who are experts in understanding and meeting the requirements of the military environment. Our technical expertise, our knowledge of the military and aerospace industries, our broad product offering, and our ability to work long-term are all part of Vishay’s ongoing commitment to meeting the changing requirements of our most reliability-conscious customers, today and in the future. selector guide 2/20 VMN-SG2090-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n t e rt e c h n o l o g y, I n c . Passives - Military and Aerospace Selector Guide Component Series/Part Number Features/Benefits Thin Film Precision Resistors M55342 QPL • Chip resistor established reliability • Low TCR (25 ppm/°C) • Tight tolerance (0.1 %) I INNOVAT AND TEC O L OGY Resistors N HN Military and Aerospace O 19 62-2012 Qualification Qualified Value Range TCR Power Rating M 55342/1 through /12 D55342/7 10 Ω to 3 MΩ 25, 50, and 100 ppm/°C 10 mW to 1W PTN • DSCC listed • Moisture-resistant wrap-around chip resistors • Low TCR (25 ppm/°C) • Tight tolerance (0.1 %) 94012, 94013, 94014, 94015, 94016, 94017, 94018, 94019, 94025, 94026, 04008, 04009 10 Ω to 3 MΩ 25, 50, and 100 ppm/°C 10 mW to 1W L1206 • DSCC listed • Low ohmic values • Power rating 250 mW at + 70 °C • DSCC listed • Ohmic values 10 Ω – 10 MΩ • Power rating 250 mW at + 70 °C • R failure rate chip resistor • 0603 / 0805 / 1206 / 2010 • Very low TCR: 10 ppm/°C, 25 ppm/°C • Tight tolerances of 0.05 % and 0.1 % • ESA qualification ongoing • High reliability chip resistor • 0603 / 0805 / 1206 / 2010 • Very low TCR: 5 ppm/°C, 10 ppm/°C, 25 ppm/°C • Very tight tolerance: 0.01 % to 0.1 % • ESA-qualified • High reliability chip arrays • Very low TCR: 10 ppm/°C absolute / 3 ppm/°C ratio • Tight tolerance: 0.1 % absolute / 0.05 % ratio • 3 sizes 100/135/182 • 2 to 8 resistors • ESA-qualified • Custom network qualified (CNW) • In lot tracking to 5 ppm/ºC • Tolerance 0.1 % to 5 % • 0603 / 0805 / 1206 • Stability 0.05 % at Pn 1000 hours 02008 1 Ω to 10 Ω 200 and 300 ppm/°C 250 mW 02008 10 Ω to 10 MΩ 200 and 400 ppm/°C 250 mW ESCC 4001/023 Variants 09 to 12 100 R to 1 M depending on size 10 and 25 ppm/°C 100 mW to 500 mW ESCC 4001/023 Variants 01 to 08 100 R to 1 M depending on size 5, 10, and 25 ppm/°C 100 mW to 500 mW ESCC 4001/025 Variants 01 to 32 100 R to 1 M depending on size 10 ppm/°C Abs 3 ppm/°C Ratio 100 mW per resistor CECC 40401-010 100 R to 1 M depending on size 10 and 25 ppm/°C 125 mW to 330 mW M1206 PFR PHR PRAHR RV selector guide 3/20 VMN-SG2090-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n t e rt e c h n o l o g y, I n c . Passives - Military and Aerospace Selector Guide Component Axial Leaded Thin Film Resistors Thin Film MELF Resistors Series/Part Number Features/Benefits I INNOVAT AND TEC O L OGY Resistors N HN Military and Aerospace O 19 62-2012 Qualification Qualified Value Range TCR Power Rating MBA/SMA 0204 • Axial leaded thin film resistors VG06 • 50 ppm/K / ± 1 %: E96 values; 15 ppm/K / ± 0,1 %: E192 values MBB/SMA 0207 • Assessment level Z, Version E: VG06 Established reliability, failure rate level E7 MBE/SMA 0414 • Approval registered at IECQ VG06 • Series includes zero-ohm jumper CECC 40101-806 1.0 Ω to 5.11 MΩ; 100 Ω to 221 kΩ; 0Ω 50 ppm/K / ± 1 %; 15 ppm/K / ± 0.1 %; — 0.4 W; 1.0 Ω to 10.0 MΩ; 100 Ω to 499 kΩ; 0Ω 50 ppm/K / ± 1 %; 15 ppm/K / ± 0.1 %; — 0.6 W; 1.0 Ω to 21.5 MΩ; 100 Ω to 470 kΩ 50 ppm/K / ± 1 %; 15 ppm/K / ± 0.1 % 1.0 W MBA/SMA 0204 • Axial leaded thin film resistors • Tolerances 0.1%, 0.25 %, 0.5 %, 1 %, and 5 % MBB/SMA 0207 • Professional and precision specifications • Series include zero-ohm jumpers MBE/SMA 0414 • Assessment level Z, Version A • Approval registered at IECQ CECC 40101-806 0.22 Ω to 10.0 MΩ; 0Ω 15, 25, and 50 ppm/K; — 0.4 W; 3.0 A 0.22 Ω to 22.0 MΩ; 0Ω 15, 25, and 50 ppm/K; — 0.6 W; 5.0 A 0.22 Ω to 22.0 MΩ 15, 25, and 50 ppm/K 1.0 W 10.0 Ω to 5.11 MΩ 15, 25, and 50 ppm/K 0.25 W ESCC 4001/022 3.0 A 5.0 A MS1 ESCC • Thin film MELF resistors • Tolerances 0.1 %, 0.5 %, and 1 % • Approval listed in the ESCC QPL MMU 0102 VG03 • Thin film MELF resistors • 50 ppm/K / ± 1 %: E96 values; 15 ppm/K / ± 0.1 %: E192 values • Series include zero-ohm jumpers • Assessment level EZ, Version E: established reliability, failure rate level E6 • Approval registered at IECQ CECC / EN 100 Ω to 2.21 MΩ; 140401- 803 100 Ω to 100 kΩ; 0Ω 50 ppm/K / ± 1 %; 15 ppm/K / ± 0.1 % — 0.2 W; 1.0 Ω to 5.11 MΩ; 75.0 Ω to 100 kΩ; 0Ω 50 ppm/K / ± 1 %; 15 ppm/K / ± 0.1 % — 0.25 W; 1.0 Ω to 10.0 MΩ; 75.0 Ω to 499 kΩ; 0Ω 50 ppm/K / ± 1 %; 15 ppm/K / ± 0.1 % — 0.4 W; MS1.... EN803 E8 • Thin film MELF resistors • 50 ppm/K / ± 1 %: E96 values; 15 ppm/K / ± 0.1 %: E192 values • Lead-bearing with SnPb termination plating • Assessment level EZ, Version E: established reliability, failure rate level E8 • Approval registered at IECQ CECC / EN 140401-803 10.0 Ω to 2.21 MΩ; 75.0 Ω to 100 kΩ 50 ppm/K / ± 1 %; 15 ppm/K / ± 0.1 % 0.25 W SMM0204 EN803 E8 • Thin film MELF resistors • 50 ppm/K / ± 1 %: E96 values; 15 ppm/K / ± 0.1 %: E192 values • Lead-free and RoHS compliant • Assessment level EZ, Version E: established reliability, failure rate level E8 • Approval registered at IECQ CECC / EN 140401-803 10.0 Ω to 2.21 MΩ; 75.0 Ω to 100 kΩ 50 ppm/K / ± 1 %; 15 ppm/K / ± 0.1 % 0.25 W MMA 0204 VG03 MMB 0207 VG03 selector guide 4/20 2.0 A 3.0 A 5.0 A VMN-SG2090-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n t e rt e c h n o l o g y, I n c . Passives - Military and Aerospace Selector Guide I INNOVAT AND TEC O L OGY Resistors N HN Military and Aerospace O 19 62-2012 Component Series/Part Number Features/Benefits Qualification Qualified Value Range TCR Power Rating Thin Film MELF Resistors MMU 0102 Professional Precision • Thin film MELF resistors • Tolerances 0.1 %, 0.25 %, 0.5 %, and 1 % • Professional and precision specifications • Series include zero-ohm jumpers • Assessment level EZ, Version A • Approval registered at IECQ CECC / EN 140401-803 0.22 Ω to 2.21 MΩ; 0Ω 15, 25, and 50 ppm/K; — 0.2 W; 2.0 A 0.22 Ω to 10.0 MΩ; 0Ω 15, 25, and 50 ppm/K; — 0.25 W; 3.0 A 0,22 Ω to 15.0 MΩ; 0Ω 15, 25, and 50 ppm/K; — 0.4 W; 5.0 A MMA 0204 HT • • • • • • Thin film MELF resistors Tolerance 0.5 % and 1 % Extended temperature range Professional specifications Assessment level EZ, Version A Approval registered at IECQ CECC / EN 140401-803 47 Ω to 100 kΩ 25 and 50 ppm/K 0.5 W UMA 0204 • • • • • Thin film MELF resistors Tolerances 0.1 % and 0.25 % High precision specifications Assessment level EZ, Version A Approval registered at IECQ CECC / EN 140401-803 22.0 Ω to 332 kΩ 10 ppm/K 0.25 W SMM0204 EN803 E0 • Thin film MELF resistors • Tolerances 0.1 %, 0.25 %, 0.5 %, and 1 % • Assessment level EZ, Version A • Approval registered at IECQ CECC / EN 140401-803 1.0 Ω to 2.2 MΩ 15, 25, and 50 ppm/K 0.25 W OMM0204 EN803 E0 • MELF zero-ohm jumper • Assessment level EZ, Version A • Approval registered at IECQ CECC / EN 140401-803 0Ω — 2.0 A TNPS 0603 ESCC • Thin film chip resistors • Tolerances 0.1 %, 0.5 %, and 1 % • Product listed in the EPPL • Approval listed in the ESCC QPL ESCC 4001/029 10.0 Ω to 221 kΩ 15, 25, and 50 ppm/K 0.1 W 10.0 Ω to 422 kΩ 15, 25, and 50 ppm/K 0.125 W 10.0 Ω to 1.0 MΩ 15, 25, and 50 ppm/K 0.25 W 100 Ω to 100 kΩ; 100 Ω to 33.2 kΩ; 0Ω 50 ppm/K / ± 1 %; 15 ppm/K / ± 0.1 %; — 0.063 W; 10.0 Ω to 1.0 MΩ; 100 Ω to 47.5 kΩ; 0Ω 50 ppm/K / ± 1 %; 15 ppm/K / ± 0.1 %; — 0.1 W; 1.0 Ω to 1.0 MΩ; 100 Ω to 100 kΩ; 0Ω 50 ppm/K / ± 1 %; 15 ppm/K / ± 0.1 %; — 0.125 W; 1.0 Ω to 10 MΩ; 43 Ω to 332 kΩ; 0Ω 50 ppm/K / ± 1 %; 15 ppm/K / ± 0.1 %; — 0.25 W; MMA 0204 Professional Precision MMB 0207 Professional Precision Thin Film Chip Resistors TNPS 0805 ESCC TNPS 1206 ESCC MCS 0402 VG01 MCT 0603 VG01 MCU 0805 VG01 MCA 1206 VG01 selector guide • Thin film chip resistors • Tolerances 0.1 % and 1 % • 50 ppm/K / ± 1 %: E96 values; 15 ppm/K / ± 0.1 %: E192 values • Series include zero-ohm jumpers • Assessment level EZ, Version E: established reliability, failure rate level E6 • Approval registered at IECQ CECC / EN 140401-801 5/20 0.63 A 1.0 A 1.5 A 2.0 A VMN-SG2090-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n t e rt e c h n o l o g y, I n c . Passives - Military and Aerospace Selector Guide I INNOVAT AND TEC O L OGY Resistors N HN Military and Aerospace O 19 62-2012 Component Series/Part Number Features/Benefits Qualification Qualified Value Range TCR Power Rating Thin Film Chip Resistors MCS 0402 Professional Precision • Thin film chip resistors • Tolerances 0.1 %, 0.25 %, 0.5 %, and 1 % • Professional and precision specifications • Series include zero ohm jumpers • Assessment level EZ, Version A • Approval registered at IECQ CECC / EN 140401-801 10.0 Ω to 1.0 MΩ; 10, 15, 25, and 50 ppm/K — 0.063 W; 10, 15, 25, and 50 ppm/K — 0.1 W; 10, 15, 25, and 50 ppm/K — 0.125 W; 0.25 W; 0Ω 10, 15, 25, and 50 ppm/K — 47 Ω to 47 kΩ; 0Ω 15, 25, and 50 ppm/K; – 0.4 W; 0.63 A 47 Ω to 100 kΩ; 0Ω 15, 25, and 50 ppm/K; – 0.15 W; 1A 47 Ω to 100 kΩ; 0Ω 15, 25, and 50 ppm/K; – 0.2 W; 1.5 A 47 Ω to 100 kΩ; 0Ω 15, 25, and 50 ppm/K; – 0.4 W; 2A CECC / EN • Thick film chip resistors 140401-802 • Chip size 0805 (D12) and 1206 (D25) • Tolerances 1 % and 5 % • 200 ppm/K / ± 5 %: E24 values; 100 ppm/K / ± 1 %: E96 values • Lead-bearing with SnPb termination plating • Assessment level EZ, Version E: established reliability, failure rate level E6 • Approval registered at IECQ 1.0 Ω to 9.1 Ω 10.0 Ω to 1.0 MΩ 200 ppm/K / ± 5 %; 100 ppm/K / ± 1 % 0.125 W 1.0 Ω to 9.1 Ω 10.0 Ω to 1.0 MΩ 200 ppm/K / ± 5 %; 100 ppm/K / ± 1 % 0.25 W CECC / EN Thick film chip resistors 140401-802 Chip size 0805 and 1206 Tolerances 1 % and 5 % 200 ppm/K / ± 5 %: E24 values; 100 ppm/K / ± 1 %: E96 values • Lead-free and RoHS compliant • Assessment level EZ, Version E: established reliability, failure rate level E6 • Approval registered at IECQ 1.0 Ω to 9.1 Ω 10.0 Ω to 1.0 MΩ 200 ppm/K / ± 5 %; 100 ppm/K / ± 1 % 0.125 W 1.0 Ω to 9.1 Ω 10.0 Ω to 1.0 MΩ 200 ppm/K / ± 5 %; 100 ppm/K / ± 1 % 0.25 W MCT 0603 Professional Precision MCU 0805 Professional Precision 0Ω 10.0 Ω to 1.0 MΩ; 0Ω 10.0 Ω to 1.0 MΩ; 0Ω 10.0 Ω to 1.0 MΩ; MCA 1206 Professional Precision MCS 0402 AT Professional Precision MCT 0603 AT Professional Precision MCU 0805 AT Professional Precision • Thin film chip resistors • Tolerances 0.1 %, 0.5 %, and 1 % • Extended temperature range • Professional and precision specification • Series include zero ohm jumpers • Assessment level EZ, Version A • Approval registered at IECQ CECC / EN 140401-801 MCA 1206 AT Professional Precision Thick Film Chip Resistors D12 EN802 E6 D25 EN802 E6 CRCW0805 EN802 E6 CRCW1206 EN802 E6 selector guide • • • • 6/20 0.63 A 1.0 A 1.5 A 2.0 A VMN-SG2090-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n t e rt e c h n o l o g y, I n c . Passives - Military and Aerospace Selector Guide I INNOVAT AND TEC O L OGY Resistors N HN Military and Aerospace O 19 62-2012 Component Series/Part Number Features/Benefits Qualification Qualified Value Range TCR Power Rating Thick Film Chip Resistors D12 EN802 E0 • Thick film chip resistors • Chip size 0805 (D12) and 1206 (D25) • Tolerances 1 % and 5 % • Series include zero-ohm jumpers • Lead-bearing with SnPb termination plating • Assessment level EZ, Version A • Approval registered at IECQ CECC / EN 140401-802 1.0 Ω to 1.0 MΩ; 0Ω 100 and 200 ppm/K; — 0.125 W; 1.5 A 1.0 Ω to 1.0 MΩ; 0Ω 100 and 200 ppm/K; — 0.25 W; 2.0 A • • • • CECC / EN 140401-802 1.0 Ω to 1.0 MΩ; 0Ω 100 and 200 ppm/K; — 0.125 W; 1.5 A 1.0 Ω to 1.0 MΩ; 0Ω 100 and 200 ppm/K; — 0.25 W; 2.0 A D25 EN802 E0 CRCW0805 EN802 E0 CRCW1206 EN802 E0 • Thick film chip resistor • 0603 / 0805 / 1206 / 2010 / 2512 • Tolerances: 1 % / 2 % / 5% • ESA qualified ESCC 4001/026 1 R to 10 M 100 ppm/°C 200 ppm/°C 100 mW to 800 mW • • • • • • MIL-PRF22684/1 51 Ω to 150 kΩ 200 ppm/°C 0.25 W MIL-PRF22684/2 4.3 Ω to 470 kΩ 200 ppm/°C 0.50 W MIL-R10509/8 10 Ω to 100 kΩ 25, 50, and 100 ppm/°C 0.05 W CMF55 (Military type RN55) MIL-R10509/7 10 Ω to 301 kΩ 0.10 W to 0.125 W CMF60 (Military type RN60) MIL-R10509/1 10 Ω to 1 MΩ 0.125 W to 0.25 W CMF65 (Military type RN65) MIL-R10509/2 10 Ω to 2 MΩ 0.25 W to 0.50 W CMF70 (Military type RN70) MIL-R10509/3 10 Ω to 2.49 MΩ 0.50 W to 1W CHPHR Fixed Linear Resistors Thick film chip resistors Chip size 0805 and 1206 Tolerances 1 % and 5 % Series include zero-ohm jumpers • Lead-free and RoHS compliant • Assessment level EZ, Version A • Approval registered at IECQ CMF07 (Military type RL07) CMF20 (Military type RL20) CMF50 (Military type RN50) selector guide Axial film resistor Military qualified Multiple body sizes Monthly acceptance testing 100 % screen tested Traceability of materials and processes • Low noise • Excellent high-frequency characteristics 7/20 VMN-SG2090-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n t e rt e c h n o l o g y, I n c . Passives - Military and Aerospace Selector Guide Component Series/Part Number Fixed Linear Resistors DFM14 (Military type RZ030) I INNOVAT 19 62-2012 Qualification Qualified Value Range TCR Power Rating MIL-PRF83401/03 10 Ω to 1 MΩ 100 and 300 ppm/°C 0.015 W/ element to 0.050 W/ element • Axial film resistor ERC50 • Established reliability military (Military type qualified (verified failure rates) RNC50, RNR50) • Multiple body sizes ERC55 • Monthly acceptance testing (Military type RNC55, RNR55) • 100 % tested per Group A • Traceability of materials and ERC60 processes (Military type • Low noise RNC60, RNR60) • Excellent high frequency characteristics ERC65 • Customs available, per source (Military type control drawings RNC65, RNR65) MIL-PRF55182/7 10 Ω to 796 kΩ 25, 50, and 100 ppm/°C 0.05 W to 0.10 W MIL-PRF55182/1 10 Ω to 2 MΩ 25, 50, and 100 ppm/°C 0.10 W to 0.125 W MIL-PRF55182/3 10 Ω to 2 MΩ 25, 50, and 100 ppm/°C 0.125 W to 0.25 W MIL-PRF55182/5 10 Ω to 3.01 MΩ 25, 50, and 100 ppm/°C 0.25 W to 0.50 W ERC70 (Military type RNC70, RNR70) MIL-PRF55182/6 10 Ω to 3.01 MΩ 25, 50, and 100 ppm/°C 0.50 W to 0.75 W MIL-PRF39009/1 0.1 Ω to 39.2 kΩ ± 100 for 0.1 Ω to 0.99 Ω; ± 50 for 1 Ω to 19.9 Ω; ± 20 for 20 Ω and above 5 W, 10 W, 20 W and 30 W MIL-PRF39009/2 1.0 Ω to 6.04 kΩ ± 50 for 1 Ω to 19.9 Ω; ± 20 for 20 Ω and above 5 W, 10 W, 20 W, and 30 W MIL-PRF39017/5 4.7 Ω to 1 MΩ 100 ppm/°C 0.125 W MIL-PRF39017/1 1 Ω to 10 MΩ 100 ppm/°C 0.25 W MIL-PRF39017/2 4.3 Ω to 3.01 MΩ 100 ppm/°C 0.50 W MIL-PRF39017/3 1 Ω to 2.7 MΩ 100 ppm/°C 1W 97004 10 Ω to 22 MΩ 100 and 200 ppm/°C 2W 98020 1.1 MΩ to 22 MΩ 200 ppm/°C 0.125 W 98021 3.3 MΩ to 22 MΩ 200 ppm/°C 0.5 W 98022 3 MΩ to 22 MΩ 200 ppm/°C 1W 99011 11 MΩ to 22 MΩ 200 ppm/°C 0.25 W ERH (Military type RER60, RER65, RER70, RER75) ENH (Military type RER40, RER45, RER50, RER55) ERL05 (Military type RLR05) ERL07 (Military type RLR07) ERL20 (Military type RLR20) ERL32 (Military type RLR32) ERL (DSCC Drawings) selector guide Features/Benefits AND TEC O L OGY Resistors N HN Military and Aerospace O • Thick film flat pack resistor networks • Military qualified • Multiple schematics and pin counts • Monthly acceptance testing • 100 % screen tested per Group A • Traceability of materials and processes • • • • • Chassis mounted Wirewound Precision Established reliability Power resistor • Axial film resistor • Established reliability military qualified (verified failure rates) • Multiple body sizes • Monthly acceptance testing • 100 % tested per Group A • Traceability of materials and processes • Low noise • Excellent high frequency characteristics • Customs available, per source control drawings • • • • Axial film resistor Multiple body sizes Low noise Excellent high-frequency characteristics 8/20 VMN-SG2090-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n t e rt e c h n o l o g y, I n c . Passives - Military and Aerospace Selector Guide Component Series/Part Number Fixed Linear Resistors ESS / ESN (Military type RWR71) I INNOVAT 19 62-2012 Qualification Qualified Value Range TCR Power Rating MIL-PRF39007/5 0.1 Ω to 12.1 kΩ 2W MIL-PRF39007/6 0.1 Ω to 12.1 kΩ ± 650 for 0.1 Ω to 0.499 Ω; ± 400 for 0.505 Ω to 1 Ω; ± 50 for 1.1 Ω to 10 Ω; ± 20 for 10 Ω and above ESS / ESN (Military type RWR78) MIL-PRF39007/7 0.1 Ω to 39.2 kΩ 10 W EGS / EGN (Military type RWR80) MIL-PRF39007/8 0.1 Ω to 3.16 kΩ 2W MIL-PRF39007/9 0.1 Ω to 1 kΩ MIL-PRF39007/10 0.1 Ω to 12.4 kΩ ESS / ESN (Military type RWR89) MIL-PRF39007/11 0.1 Ω to 4.12 kΩ 3W EGS / EGN (Military type RWR82) MIL-PRF39007/12 0.1 Ω to 1.3 kΩ 1.5 W ESS / ESN (Military type RWR74) EGS / EGN (Military type RWR81) EGS / EGN (Military type RWR84) Features/Benefits AND TEC O L OGY Resistors N HN Military and Aerospace O • • • • • • • • • • Axial-leaded Wirewound Precision Established reliability Power resistor Axial-leaded Wirewound Precision Established reliability Power resistor ± 650 for 0.1 Ω to 0.499 Ω; ± 400 for 0.505 Ω to 1 Ω; ± 50 for 1.1 Ω to 10 Ω; ± 20 for 10 Ω and above 5W 1W 7W FRJ50 • Axial film resistor • Zero-ohm jumper 87010 0Ω N/A N/A LVR03 (Military type RLV30) • Axial-leaded • Low ohmic value • Power resistor MIL-PRF49465/6 0.01 Ω to 0.2 Ω ± 350 for 0.01 Ω to 0.0249 Ω; ± 200 for 0.025 Ω to 0.0499 Ω; ± 125 for 0.05 Ω to 0.0749 Ω; ± 75 for 0.075 Ω to 0.099 Ω; ± 50 for 0.1 Ω and above 3W MIL-PRF49465/7 0.01 Ω to 0.3 Ω ± 250 for 0.01 Ω to 0.0249 Ω; ± 150 for 0.025 Ω to 0.0499 Ω; ± 100 for 0.05 Ω to 0.0749 Ω; ± 75 for 0.075 W to 0.099 Ω; ± 50 for 0.1 Ω and above 5W MIL-PRF83401/01 10 Ω to 1 MΩ 100 and 300 ppm/°C 0.05 W/ element to 0.20 W/ element MIL-PRF83401/02 10 Ω to 1 MΩ 100 and 300 ppm/°C 0.05 W/ element to 0.20 W/ element LVR05 (Military type RLV31) MDM14 (Military type RZ010) MDM16 (Military type RZ020) selector guide • Thick film DIP resistor networks • Military qualified • Multiple schematics and pin counts • Monthly acceptance testing • 100 % screen tested per Group A • Traceability of materials and processes • Rugged molded body 9/20 VMN-SG2090-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n t e rt e c h n o l o g y, I n c . Passives - Military and Aerospace Selector Guide I INNOVAT AND TEC O L OGY Resistors N HN Military and Aerospace O 19 62-2012 Component Series/Part Number Features/Benefits Qualification Qualified Value Range TCR Power Rating Fixed Linear Resistors MSM06C (Military type RZ040) • Thick film SIP resistor networks • Military qualified • Multiple schematics and pin counts • Monthly acceptance testing • 100 % screen tested per Group A • Traceability of materials and processes • Rugged molded body MIL-PRF83401/04 10 Ω to 1 MΩ 100 and 300 ppm/°C 0.10 W/ element to 0.20 W/ element MIL-PRF83401/05 10 Ω to 1 MΩ 100 and 300 ppm/°C 0.10 W/ element to 0.20 W/ element MIL-PRF83401/06 10 Ω to 1 MΩ 100 and 300 ppm/°C 0.10 W/ element to 0.20 W/ element MSM06A (Military type RZ070) MIL-PRF83401/07 10 Ω to 1 MΩ 100 and 300 ppm/°C 0.07 W/ element to 0.12 W/ element MSM08A (Military type RZ080) MIL-PRF83401/08 10 Ω to 1 MΩ 100 and 300 ppm/°C 0.07 W/ element to 0.12 W/ element MIL-PRF83401/09 10 Ω to 1 MΩ 100 and 300 ppm/°C 0.07 W/ element to 0.12 W/ element MIL-PRF83401/18 per slash sheet 100 and 300 ppm/°C 0.10 W/ element MIL-PRF83401/19 per slash sheet 100 and 300 ppm/°C 0.10 W/ element MIL-PRF83401/24 10 Ω to 1 MΩ 100 and 300 ppm/°C 0.07 W/ element to 0.12 W/ element 89088 10 Ω to 500 kΩ 5 ppm/°C 0.1 W MSM08C (Military type RZ050) MSM10C (Military type RZ060) MSM10A (Military type RZ090) MSM06AS1 and S2 (Military type RZ180) MSM08A-S1 through S12 (Military type RZ190) • Thick film SIP resistor networks • Military qualified • Multiple schematics and pin counts • Monthly acceptance testing • 100 % screen tested per Group A • Traceability of materials and processes • Rugged molded body MSM10A-S2, -S3 and -S4 (Military type RZ240) PTF56 • Axial film resistor (DSCC drawing) • Ultra precision • Multiple body sizes • 100 % screen tested • Traceability of materials and processes • Very low noise • Excellent high-frequency characteristics • Ultra high stability • Extremely low TC of R and resistance tolerance selector guide 10/20 VMN-SG2090-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n t e rt e c h n o l o g y, I n c . Passives - Military and Aerospace Selector Guide Component Series/Part Number Fixed Linear Resistors RCWPM0550 (Military type RM0505) I INNOVAT 19 62-2012 Qualification Qualified Value Range TCR Power Rating MIL-PRF55342/02 5.6 Ω to 1 MΩ 100 and 300 ppm/°C 0.055 W MIL-PRF55342/03 5.6 Ω to 1 MΩ 100 and 300 ppm/°C 0.10 W MIL-PRF55342/04 5.6 Ω to 4.75 MΩ 100 and 300 ppm/°C 0.15 W RCWPM7225 (Military type RM2208) MIL-PRF55342/05 5.6 Ω to 15 MΩ 100 and 300 ppm/°C 0.225 W RCWPM0575 (Military type RM0705) MIL-PRF55342/06 5.6 Ω to 1 MΩ 100 and 300 ppm/°C 0.10 W RCWPM1206 (Military type RM1206) MIL-PRF55342/07 5.6 Ω to 5.6 MΩ 100 and 300 ppm/°C 0.25 W RCWPM2010 (Military type RM2010) MIL-PRF55342/08 5.6 Ω to 15 MΩ 100 and 300 ppm/°C 0.80 W RCWPM2512 (Military type RM2512) MIL-PRF55342/09 5.6 Ω to 15 MΩ 100 and 300 ppm/°C 1W RCWPM1100 (Military type RM1010) MIL-PRF55342/10 5.6 Ω to 5.6 MΩ 100 and 300 ppm/°C 0.50 W RCWPM0402 (Military type RM0402) MIL-PRF55342/11 5.6 Ω to 1 MΩ 100 and 300 ppm/°C 0.04 W RCWPM0603 (Military type RM0603) MIL-PRF55342/12 5.6 Ω to 1 MΩ 100 and 300 ppm/°C 0.07 W 03002, 03013, 03014, 03015, 03016, 87011, 90047, 90048, 90049, 90092, 94011 0Ω N/A N/A MIL-PRF18546/1 0.1 Ω to 39.2 kΩ ± 100 for 0.1 Ω to 0.99 Ω; ± 50 for 1 Ω to 19.9 Ω; ± 20 for 10 Ω and above 5 W, 10 W, 20 W and 30 W MIL-PRF18546/2 0.1 Ω to 35.7 kΩ ± 100 for 0.1 Ω to 0.99 Ω; ± 50 for 1 Ω to 19.9 Ω; ± 20 for 10 Ω and above 75 W and 120 W RCWPM5100 (Military type RM1005) RCWPM5150 (Military type RM1505) RCWPM (DSCC drawings) RH / NH (Military type RE60, RE65, RE70, RE75) RH / NH (Military type RE60, RE65, RE70, RE75) selector guide Features/Benefits AND TEC O L OGY Resistors N HN Military and Aerospace O • Thick film chip resistor • Established reliability military qualified (verified failure rates) • Multiple case sizes • Monthly acceptance testing • 100 % screen tested per Group A • Traceability of materials and processes • Thick film chip resistor • Zero-ohm jumper • Multiple case sizes • Chassis mounted • Wirewound precision • Power resistor 11/20 VMN-SG2090-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n t e rt e c h n o l o g y, I n c . Passives - Military and Aerospace Selector Guide Component Fixed Linear Resistors Series/Part Number Features/Benefits I INNOVAT AND TEC O L OGY Resistors N HN Military and Aerospace O 19 62-2012 Qualification Qualified Value Range TCR Power Rating MIL-PRF55182/1 10 Ω to 1.21 MΩ 25 and 50 ppm/°C 0.10 W to 1.25 W MIL-PRF55182/2 49.9 Ω to 200 kΩ 25 and 50 ppm/°C 0.125 W to 0.25 W MIL-PRF55182/3 10 Ω to 2.49 MΩ 25 and 50 ppm/°C 0.125 W to 0.25 W MIL-PRF55182/5 24.9 Ω to 4.99 MΩ 25 and 50 ppm/°C 0.25 W to 0.50 W HDN70 (Military Type RNR70, RNN70) MIL-PRF55182/6 24.9 Ω to 4.99 MΩ 25 and 50 ppm/°C 0.50 W to 0.75 W HDN75 (Military Type RNR70, RNN75) MIL-PRF55182/10 49.9 Ω to 1.21 MΩ 25 ppm/°C 1 W to 2W MIL-PRF26/4 0.1 Ω to 20 kΩ 3 W, ± 650 for 0.1 Ω to 0.498 Ω; ± 400 Ω for 0.499 Ω to 0.999 Ω; 6.5 W and 11 W ± 50 for 1 Ω to 9.9 Ω; ± 30 for 10 Ω to 19.9 Ω; ± 20 for 20 Ω and above RS / G (Military type RW70, RW74, RW78, RW79) MIL-PRF26/5 0.1 Ω to 71.5 kΩ 1 W to ± 650 for 0.1 Ω to 0.498 Ω; 3 W, ± 400 Ω for 0.499 Ω to 0.999 Ω; 5 W and ± 50 for 1 Ω to 9.9 Ω; 10 W ± 30 for 10 Ω to 19.9 Ω; ± 20 for 20 Ω and above RS / G (Military type RW80, RW81) MIL-PRF26/6 0.1 Ω to 2.74 kΩ 1 W and ± 650 for 0.1 Ω to 0.498 Ω; 2W ± 400 Ω for 0.499 Ω to 0.999 Ω; ± 50 for 1 Ω to 9.9 Ω; ± 30 for 10 Ω to 19.9 Ω; ± 20 for 20 Ω and above 87012, 87013 10 Ω to 2.2 MΩ 100 and 300 ppm/°C 0.08 W/ element to 0.16 W/ element MIL-PRF49465/1 0.01 Ω to 0.5 Ω ± 150 for 0.01 Ω to 0.0249 Ω; ± 125 for 0.025 Ω to 0.0499 Ω; ± 100 for 0.05 Ω to 0.0749 Ω; ± 50 for 0.075 Ω to 0.099 Ω; ± 50 for 0.1 Ω and above 5W ± 90 for 0.1 Ω to 0.99 Ω; ± 50 for 1.0 Ω to 9.9 Ω; ± 20 for 10.0 Ω and above 1W • Axial film resistor HDN55 (Military Type • Established reliability military qualified (verified failure rates) RNR55, RNN55) • Multiple body sizes HDN57 (Military Type • Monthly acceptance testing RNR57, RNN57) • 100 % tested per Group A • Traceability of materials and HDN60 processes (Military Type • Low noise RNR60, RNN60) • Hermetic glass enclosure is impervious to harmful HDN65 environment (Military Type RNR65, RNN65) RS (Military type RW67, RW68, RW69) SOMC (DSCC drawings) SPR1005 (Military type RLV10) • • • • Axial-leaded Wirewound Precision Power resistor • Thick film SMD DIP resistor networks • Multiple schematics and pin counts • Rugged molded body • Axial-leaded • Low-ohmic value • Power resistor WSC0001 - 15 (93706) • Surface mount, 1 W, power resistor 93076 0.1 Ω to 2.77 kΩ WSC0002 - 15 (93077) • Surface mount, 2 W, power resistor 93077 0.1 Ω to 10.4 kΩ 2W WSC01/2 - 15 (93075) • Surface mount, 1/2 W, power resistor 93075 0.1 Ω to 4.99 Ω 0.5 W selector guide 12/20 VMN-SG2090-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n t e rt e c h n o l o g y, I n c . Passives - Military and Aerospace Selector Guide Component Series/Part Number Fixed Linear Resistors WSL2512 (Military type VLV2512) I INNOVAT 19 62-2012 Qualification Qualified Value Range TCR Power Rating A-A55534/08 0.005 Ω to 0.1 Ω 400 ppm/°C 1W WSL2010 (Military type VLV2010) A-A55534/07 0.007 Ω to 0.5 Ω 0.5 W WSL1206 (Military type VLV1206) A-A55534/02 0.007 Ω to 0.5 Ω 0.25 W WSR2 (Military type VLV2) A-A55534/09 0.005 Ω to 1.0 Ω selector guide Features/Benefits AND TEC O L OGY Resistors N HN Military and Aerospace O • Metal strip • Low-ohmic value • Power surface mount resistor 13/20 110 ppm/°C 2W VMN-SG2090-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n t e rt e c h n o l o g y, I n c . Passives - Military and Aerospace Selector Guide Component Serial/Part Number MLCC Specialty Product Line CDR01 • • • • CDR02 • • • • CDR03 • • • • CDR04 • • • • CDR06 • • • • CDR31 • • • • CDR32 • • • • CDR33 • • • • CDR34 • • • • • CDR35 • • • • selector guide AND TEC I INNOVAT O L OGY Capacitors N HN Military and Aerospace O 19 62-2012 Features/Benefits/Qualifications Qualification Qualified Value Range Voltage Range Standard capacitance 0805 case size Established reliability Tin/lead “Z” code and solder coat “U” code terminations available Standard capacitance 1805 case size Established reliability Tin/lead “Z” code and solder coat “U” code terminations available Standard capacitance 1808 case size Established reliability Tin/lead “Z” code and solder coat “U” code terminations available Standard capacitance 1812 case size Established reliability Tin/lead “Z” code and solder coat “U” code terminations available Standard capacitance 2225 case size Established reliability Tin/lead “Z” code and solder coat “U” code terminations available Standard capacitance 0805 case size Established reliability Tin/lead “Z” code and solder coat “U” code terminations available Standard capacitance 1206 case size Established reliability Tin/lead “Z” code and solder coat “U” code terminations available Standard capacitance 1210 case size Established reliability Tin/lead “Z” code and solder coat “U” code terminations available Standard capacitance 1812 case size Multilayer ceramic chip capacitors Established reliability Tin/lead “Z” code and solder coat “U” code terminations available Standard capacitance 1825 case size Established reliability Tin/lead “Z” code and solder coat “U” code terminations available MIL-PRF-55681/1 10 pF to 4700 pF 50 V to 100 V MIL-PRF-55681/1 1220 pF to 22 000 pF 50 V to 100 V MIL-PRF-55681/1 330 pF to 68 000 pF 50 V to 100 V MIL-PRF-55681/1 1200 pF to 180 000 pF 50 V to 100 V MIL-PRF-55681/3 390 000 pF to 470 000 pF 50 V MIL-PRF-55681/7 1.0 pF to 18 000 pF 50 V to 100 V MIL-PRF-55681/8 1.0 pF to 39 000 pF MIL-PRF-55681/9 1000 pF to 100 000 pF MIL-PRF-55681/10 2200 pF to 180 000 pF MIL-PRF-55681/11 4700 pF to 470 000 pF 14/20 VMN-SG2090-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n t e rt e c h n o l o g y, I n c . Passives - Military and Aerospace Selector Guide Component Serial/Part Number MLCC Specialty Product Line DSCC 03028 • • • • DSCC 03029 • • • • • DSCC 05001 • • • • DSCC 05002 • • • • DSCC 05003 • • • • DSCC 05006 • • • • DSCC 05007 • • • • VJ HiRel COG (NPO) • I INNOVAT 19 62-2012 Features/Benefits/Qualifications Qualification Qualified Value Range Voltage Range DSCC 03028 0.5 pF to 100 000 pF 16 V to 100 V DSCC 03029 0.5 pF to 10 000 pF DSCC 05001 1 pF to 100 pF DSCC 05002 1 pF to 100 pF DSCC 05003 1 pF to 27 pF 50 V to 100 V DSCC 05006 0.5 pF to 220 000 pF 10 V to 200 V DSCC 05007 0.5 pF to 470 000 pF 16 V to 200 V HI REL COTS 0.5 pF to 56 000 pF 10 V to 600 V HI REL COTS 100 pF to 6.8 µF 10 V to 500 V • Standard capacitance Smaller case size (0603) Screened per DSCC drawing Tin/lead “Z” code terminations available Standard capacitance Smaller case size (0402) Multilayer ceramic chip capacitors Screened per DSCC drawing Tin/lead “Z” code terminations available High frequency applications Maximum DF of 0.05 % Case size 0805 Tin/lead “Z” code terminations available High frequency applications Maximum DF of 0.05 % Case size 0603 Tin/lead “Z” code terminations available High frequency applications Maximum DF of 0.05 % Case size 0402 Tin/lead “Z” code terminations available Extended capacitance Standard CDR case size (0805 Screened per DSCC drawing Tin/lead “Z” code and solder coat “U” code terminations available Extended capacitance Standard CDR case size (1206 Screened per DSCC drawing Tin/lead “Z” code and solder coat “U” code terminations available Extended capacitance, case sizes 0402 to 2225 Hi-rel screened to MIL-PRF-55681 Group A and C guidelines Tin/lead terminations available Extended capacitance Case sizes 0402 to 3640 Hi-rel screened to MIL-PRF-55681 Group A and C guidelines Tin/lead terminations available CWR06 • • • • • Standard capacitance range Conformal case Tantalum chip capacitor Established reliability Gold or tin/lead terminations available MIL-PRF-55363/4 0.10 µF to 100 µF 4 V to 50 V CWR16 • • • • • Extended capacitance range Conformal case Tantalum chip capacitor, Established reliability Gold or tin/lead terminations available MIL-PRF-55365/13 0.33 µF to 330 µF 4 V to 35 V VJ HiRel X7R / X5R Tantalum Capacitors AND TEC O L OGY Capacitors N HN Military and Aerospace O selector guide • • • • • 15/20 50 V to 250 V VMN-SG2090-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n t e rt e c h n o l o g y, I n c . Passives - Military and Aerospace Selector Guide Component Serial/Part Number Tantalum Capacitors DSCC 02002 AND TEC I INNOVAT O L OGY Capacitors N HN Military and Aerospace O 19 62-2012 Features/Benefits/Qualifications Qualification Qualified Value Range Voltage Range • • • • • • Vishay 195D series Standard capacitance range Conformal coated Tantalum chip capacitor Hi-rel screened Tin/lead terminations available DSCC 02002 10 µF to 150 µF 10 V to 40 V T95 • • • • • Extended capacitance Conformal case Tantalum chip capacitor Hi-rel screened Tin/lead terminations available HI REL COTS 0.10 µF to 680 µF 4 V to 50 V CWR11 • • • • • Standard capacitance range Molded case Tantalum chip capacitor Established reliability Tin/lead terminations MIL-PRF-55365/8 0.10 µF to 100 µF DSCC 95158 • • • • • • • Vishay 593D series Low ESR Standard capacitance range Molded case Tantalum chip capacitor Hi-rel screened Tin/lead terminations available DSCC 95158 4.7 µF to 220 µF T83 • • • • • Extended capacitance Molded case Tantalum chip capacitor Hi-rel screened Tin/lead terminations available HI REL COTS 0.10 µF to 330 µF CSR13 • • • • • • Standard capacitance range Metal case Hermetically sealed Axial-leaded Solid tantalum capacitor Tin/lead terminations MIL-PRF-39003/01 0.056 µF to 330 µF 6 V to 100 V CSR23 • • • • • • Extended capacitance range Metal case Hermetically sealed Axial-leaded Solid tantalum capacitor Tin/lead terminations MIL-PRF-39003/03 1.2 µF to 1000 µF 6 V to 50 V T97 • • • • • • • Ultra-low ESR Robust dual anode design Extended capacitance Conformal case Tantalum chip capacitor Hi-rel screened Tin/lead terminations available HI REL COTS 22 µF to 1500 µF 4 V to 50 V CSR21 • • • • • • • Standard capacitance range Low ESR Metal case Hermetically sealed Axial-leaded Solid tantalum capacitor Tin/lead terminations MIL-PRF-39003/09 5.6 µF to 330 µF 6 V to 50 V selector guide 16/20 VMN-SG2090-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n t e rt e c h n o l o g y, I n c . Passives - Military and Aerospace Selector Guide Component Serial/Part Number Tantalum Capacitors CLR65 CLR69 I INNOVAT 19 62-2012 Qualification Qualified Value Range Voltage Range • Standard capacitance range • Silver case, hermetically sealed, axial-leaded • Wet tantalum capacitor • Established reliability • Tin/lead terminations MIL-PRF-39006/09 1.7 µF to 1200 µF 6 V to 125 V • Extended capacitance range • Silver case, hermetically sealed, axial-leaded • Wet tantalum capacitor • Established reliability • Tin/lead terminations MIL-PRF-39006/21 6.8 µF to 2200 µF 6 V to 125 V M39006/22 or CLR79 • Standard capacitance range • Tantalum case, hermetically sealed, axial leaded • Wet tantalum capacitor • Established reliability • Tin/lead terminations MIL-PRF-39006/22 1.7 µF to 1200 µF M39006/25 or CLR81 • Extended capacitance range • Tantalum case, hermetically sealed, axial-leaded • Wet tantalum capacitor • Established reliability • Tin/lead terminations MIL-PRF-39006/25 6.8 µF to 2200 µF M39006/30 or CLR90 • Low ESR • Standard capacitance range • Tantalum case, hermetically sealed, axial-leaded • Wet tantalum capacitor • Established reliability • Tin/lead terminations MIL-PRF-39006/30 1.7 µF to 1200 µF M39006/31 or CLR91 • Low ESR • Standard capacitance range • Tantalum case, hermetically sealed, axial-leaded • Wet tantalum capacitor • Established reliability • Tin/lead terminations MIL-PRF-39006/31 6.8 µF to 2200 µF DSCC 06013 • Space level screened, CLR79, MIL approved • Standard capacitance range • Tantalum case, hermetically sealed, axial-leaded • Wet tantalum capacitor • Established reliability • Tin/lead terminations DSCC 06013 1.7 µF to 1200 µF DSCC 06014 • Space level screened, CLR81, MIL approved • Extended capacitance range • Tantalum case, hermetically sealed, axial-leaded • Wet tantalum capacitor • Established reliability • Tin/lead terminations DSCC 06014 6.8 µF to 2200 µF selector guide Features/Benefits/Qualifications AND TEC O L OGY Capacitors N HN Military and Aerospace O 17/20 VMN-SG2090-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n t e rt e c h n o l o g y, I n c . Passives - Military and Aerospace Selector Guide Component Serial/Part Number Tantalum Capacitors DSCC 06015 Features/Benefits/Qualifications AND TEC I INNOVAT O L OGY Capacitors N HN Military and Aerospace O 19 62-2012 Qualification Qualified Value Range Voltage Range • Space level screened, CLR90, MIL approved • Low ESR • Standard capacitance range • Tantalum case, hermetically sealed, axial-leaded • Wet tantalum capacitor • Established reliability • Tin/lead terminations DSCC 06015 1.7 µF to 1200 µF 6 V to 125 V DSCC 06016 • Space level screened, CLR91, MIL approved • Low ESR • Extended capacitance range • Tantalum case, hermetically sealed, axial-leaded • Wet tantalum capacitor • Established reliability • Tin/lead terminations DSCC 06016 6.8 µF to 2200 µF ST • Ultra extended capacitance range • Tantalum case, hermetically sealed, axial-leaded • Wet tantalum capacitor • Tin/lead terminations HI REL COTS 10 µF to 1800 µF DSCC 93026 • Super extended capacitance range • Tantalum case, hermetically sealed, axial leaded • Wet tantalum capacitor • Hi-rel screened • Tin/lead terminations DSCC 93026 10 µF to 1800 µF STA • Ultra extended capacitance range • Tantalum case, hermetically sealed, axial-leaded • Wet tantalum capacitor • Tin/lead terminations HI REL COTS 150 µF to 4700 µF 6 V to 15 V STE • Ultra extended capacitance range • Tantalum case, hermetically sealed, axial-leaded • Wet tantalum capacitor, tin/lead terminations 750 µF to 6000 µF 16 V to 75 V 25 V to 125 V DSCC 04033 • MIL-DTL-3965 styles • CL13, CL16, CL19 • Metal case, hermetically sealed, axial and solder lug configurations • Wet tantalum capacitor • Tin/lead terminations DSCC 04033 2 µF to 1300 µF 8 V to 630 V DSCC 04021 • MIL-DTL-3965 styles • CL55 • Metal case, hermetically sealed, solder lug configurations, • Wet tantalum capacitor array • Tin/lead terminations DSCC 04021 70 µF to 2400 µF 15 V to 150 V selector guide 18/20 VMN-SG2090-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n t e rt e c h n o l o g y, I n c . Passives - Military and Aerospace Selector Guide Component Serial/Part Number Magnetics/ Inductors MS21426 • • • • • • MS75087 MS75088 MS75083 MS75084 Features/Benefits MS14046 selector guide 62-2012 I INNOVAT Qualified Value Range Rated DC Current Type LT Molded Shielded Miniature Tin/lead axial leads IMS-2 series MIL-PRF-15305 -14 to -37 1.2 µH to 100 µH 51 mA to 247 mA • • • • • Type LT Molded Shielded Tin/lead axial leads IMS-5 series MIL-PRF-15305 -1 to -12 0.10 µH to 0.82 µH 370 mA to 1790 mA MIL-PRF-15305 -1 to -14 1.0 µH to 12 µH 200 mA to 1070 mA • • • • Type LT Molded Tin/lead axial leads IM-2 series MIL-PRF-15305 -1 to -13 0.10 µH to 1.0 µH 385 mA to 1350 mA MIL-PRF-15305 -1 to -17 1.2 µH to 27 µH 135 mA to 590 mA MIL-PRF-15305 -1 to -19 33 µH to 1000 µH 28 mA to 130 mA MIL-PRF-15305 -1 to -16 0.15 µH to 4.7 µH 260 mA to 2450 mA MIL-PRF-15305 -1 to -10 5.6 μH to 33 μH 165 mA to 495 mA MIL-PRF-15305 -1 to -21 36 μH to 240 μH 101 mA to 180 mA MIL-PRF-15305 -1 to -12 3.3 μH to 27 μH 205 mA to 990 mA • • • • Type LT Molded Tin/lead axial leads IM-4 Series MS90538 MS75101 19 Qualification MS75085 MS18130 AND TEC O L OGY Magnetics, Inductors N HN Military and Aerospace O • • • • Type LT Molded Tin/lead axial leads IM-6 Series 19/20 VMN-SG2090-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n t e rt e c h n o l o g y, I n c . Passives - Military and Aerospace Selector Guide I INNOVAT AND TEC O L OGY Applications N HN Military and Aerospace O 19 62-2012 Worldwide Sales Contacts The Americas EUROPE United states Germany Vishay Americas One Greenwich Place Shelton, CT 06484 United States Ph: +1-402-563-6866 Fax: +1-402-563-6296 Vishay Electronic GmbH Dr.-Felix-Zandman-Platz 1 95100 Selb Germany Ph: +49-9287-71-0 Fax: +49-9287-70435 Asia france singapore Vishay intertechnology Asia Pte Ltd. 37A Tampines Street 92 #07-00 Singapore 528886 Ph: +65-6788-6668 Fax: +65-6788-0988 Vishay S.A. 199, bd de la madelEine 06003 nice, cedex 1 France Ph: +33-4-9337-2727 Fax: +33-4-9337-2726 p.r. China united kingdom Vishay China Co., Ltd. 15D, Sun Tong Infoport Plaza 55 Huai Hai West Road Shanghai 200030 P.R. China PH: +86-21-5258 5000 FAX: +86-21-5258 7979 Vishay Ltd. Suite 6C, Tower House St. Catherine’s Court Sunderland Enterprise Park Sunderland SR5 3XJ UNITED KINGDOM Ph: +44-191-516-8584 Fax: +44-191-549-9556 japan VISHAY JAPAN CO., LTD. Shibuya Prestige Bldg. 4F 3-12-22, Shibuya Shibuya-ku Tokyo 150-0002 Japan Ph: +81-3-5466-7150 fax: +81-3-5466-7160 selector guide 20/20 VMN-SG2090-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000