RJU www.vishay.com Vishay Dale Metal Oxide Resistors, Special Purpose, High Power, Ultra High Value FEATURES • • • • • Wattages to 400 W at + 25 °C Derated to 0 at + 230 °C Voltage testing to 100 kV Tolerance: ± 1 %; ± 2 %; ± 5 %; ± 10 % Two terminal styles, style 3 - tab terminal and style 4 - ferrule terminal • TCR: ± 200 ppm/°C and ± 100 ppm/°C available, measured between + 25 °C and + 125 °C • Coating: Blue flameproof • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 Note * Lead (Pb)-containing terminations are not RoHS-compliant. Exemptions may apply. STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL POWER RATING MAXIMUM WORKING P25 °C VOLTAGE (1) W V HISTORICAL MODEL RESISTANCE RANGE RJU040 RJU-40 40 25K 1K to 1G RJU050 RJU-50 50 33K 1K to 1G RJU070 RJU-70 70 40K 1K to 1G RJU095 RJU-95 95 35K 1K to 1G RJU095..1 RJU-95-1 95 35K 1K to 1G RJU140 RJU-140 140 65K 1K to 1G RJU140..1 RJU-140-1 140 65K 1K to 1G RJU275 RJU-275 275 90K 100K to 1G RJU275..1 RJU-275-1 275 90K 100K to 1G RJU150 RJU-150 150 40K 100K to 1G RJU150..1 RJU-150-1 150 40K 100K to 1G RJU400 RJU-400 400 125K 100K to 1G RJU400..1 RJU-400-1 400 125K 100K to 1G Notes • All resistance values are calibrated at 100 VDC. Calibration at other voltages upon request. (1) Continuous working voltage shall be P x R or maximum working voltage, whichever is less. TOLERANCE ±% TEMPERATURE COEFFICIENT ± ppm/°C 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 100, 200 100, 200 100, 200 100, 200 100, 200 100, 200 100, 200 100, 200 100, 200 100, 200 100, 200 100, 200 100, 200 GLOBAL PART NUMBER INFORMATION New Global Part Numbering: RJU0952M50KKF071 (preferred part numbering format) R J U GLOBAL MODEL (see Standard Electrical Specification table) 0 9 5 2 M 5 0 RESISTANCE VALUE TOLERANCE CODE K = kΩ M = MΩ G = GΩ 1K00 = 1.0 kΩ 10M0 = 10 MΩ 1G00 = 1.0 GΩ F=±1% G=±2% J=±5% K = ± 10 % K K F 0 7 TEMP. COEFFICIENT K = 100 ppm N = 200 ppm 1 PACKAGING SPECIAL E07= Lead (Pb)-free, foam F07 =Tin/lead, foam Blank = Standard (Dash number) (Up to 3 digits) From 1 to 999 as applicable 1 = Ferrule terminal Historical Part Number: RJU-95-12M50KK (will continue to be accepted) RJU-95-1 HISTORICAL MODEL 2M50 RESISTANCE VALUE K TOLERANCE CODE K TEMP. COEFFICIENT F07 PACKAGING Note • For additional information on packaging, refer to the Through Hole Resistor Packaging document (www.vishay.com/doc?31544). Revision: 21-Sep-12 Document Number: 31035 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RJU www.vishay.com Vishay Dale DIMENSIONS in inches (millimeters) Style 3 0.172 [4.37] Dia. 0.313 [7.95] 0.781 [19.84] A Style 4 C B B 0.516 [13.11] A GLOBAL MODEL STYLE RJU040 3 RJU050 3 RJU070 3 RJU095 3 RJU095..1 4 RJU140 3 RJU140..1 4 RJU275 3 RJU275..1 4 RJU150 3 RJU150..1 4 RJU400 3 RJU400..1 4 D B (1) 0.750 (19.05) 0.750 (19.05) 0.750 (19.05) 1.130 (28.70) 1.130 (28.70) 1.130 (28.70) 1.130 (28.70) 1.500 (38.10) 1.500 (38.10) 2.000 (50.80) 2.000 (50.80) 2.000 (50.80) 2.000 (50.80) A 4.500 (114.30) 6.000 (152.40) 8.000 (203.20) 6.500 (165.10) 7.690 (195.33) 10.500 (266.70) 11.690 (296.93) 14.500 (368.30) 15.690 (398.53) 6.500 (165.10) 7.690 (195.33) 18.500 (469.90) 19.690 (500.13) C 0.500 (12.70) 0.500 (12.70) 0.500 (12.70) 0.750 (19.05) D N/A N/A 0.812 (20.62) N/A N/A N/A 0.750 (19.05) N/A N/A 0.812 (20.62) 1.130 (28.70) N/A N/A 1.140 (28.96) 1.560 (39.62) N/A N/A 1.140 (28.96) 1.560 (39.62) N/A N/A 1.140 (28.96) RATED POWER IN % Note (1) Dimensional tolerances are ± 0.016 (0.406 mm) or ± 1 %, whichever is greater. 120 100 80 60 40 20 0 0 25 50 75 100 125 150 175 200 225 250 AMBIENT TEMPERATURE IN °C DERATING MARKING - DALE - Model - Value - Tolerance - Date code Revision: 21-Sep-12 Document Number: 31035 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000