D, G www.vishay.com Vishay Dale Carbon Film Resistors, Special Purpose, High Voltage FEATURES • Ratings to 100 W, 125 kV • Available with either radial bands or ferrule terminals • Standard models epoxy/enamel coated, additional vinyl heat shrink sleeve available for added protection • Model G is non-inductive • ± 20 % tolerance standard, tolerances of ± 15 %, ± 10 % and ± 5 % available • See models B and T for general purpose high voltage carbon film resistors STANDARD ELECTRICAL SPECIFICATIONS POWER RATING P70 °C W 10 20 20 30 30 60 60 35 35 100 100 10 20 20 30 30 60 60 35 35 100 100 HISTORICAL MODEL MAXIMUM WORKING VOLTAGE (1) V 25K 35K 35K 65K 65K 90K 90K 40K 40K 125K 125K 16K 18K 18K 25K 25K 30K 30K 20K 20K 32K 32K RESISTANCE RANGE (2) 50K to 500M 100K to 500M 100K to 500M 100K to 500M 100K to 500M 400K to 500M 400K to 500M 300K to 500M 300K to 500M 700K to 500M 700K to 500M 1K to 1M 1K to 1M 1K to 1M 1K to 1M 1K to 1M 1K to 5M 1K to 5M 1K to 1M 1K to 1M 1K to 10M 1K to 10M TOLERANCE (3) ±% DJU DJU DPW DPW DPW..1 DPW-1 DPX DPX DPX..1 DPX-1 DVY DVY DVY..1 DVY-1 DZW DZW DZW..1 DZW-1 DZZ DZZ DZZ..1 DZZ-1 GJU GJU GPW GPW GPW..1 GPW-1 GPX GPX GPX..1 GPX-1 GVY GVY GVY..1 GVY-1 GZW GZW GZW..1 GZW-1 GZZ GZZ GZZ..1 GZZ-1 Notes (1) Continuous working voltage shall be P x R or maximum working voltage, whichever is less. (2) All resistance values are calibrated at 100 V -calibration at other voltages available on request. DC (3) ± 20 % standard, ± 5 %, ± 10 %, and ± 15 % are available. STYLE 5, 10, 15, 20 5, 10, 15, 20 5, 10, 15, 20 5, 10, 15, 20 5, 10, 15, 20 5, 10, 15, 20 5, 10, 15, 20 5, 10, 15, 20 5, 10, 15, 20 5, 10, 15, 20 5, 10, 15, 20 5, 10, 15, 20 5, 10, 15, 20 5, 10, 15, 20 5, 10, 15, 20 5, 10, 15, 20 5, 10, 15, 20 5, 10, 15, 20 5, 10, 15, 20 5, 10, 15, 20 5, 10, 15, 20 5, 10, 15, 20 3 3 4 3 4 3 4 3 4 3 4 3 3 4 3 4 3 4 3 4 3 4 Non-Inductive GLOBAL MODEL GLOBAL PART NUMBER INFORMATION New Global Part Numbering: DPW2M50LB191 (preferred part numbering format) D P W 2 GLOBAL MODEL RESISTANCE VALUE (See Standard Electrical Specifications table) R=Ω K = kΩ M = MΩ 100R = 100 Ω 13K0 = 13 kΩ 500M = 500 MΩ M 5 0 TOLERANCE CODE J=±5% K = ± 10 % L = ± 15 % M = ± 20 % L B 1 9 PACKAGING SPECIAL E19 = Lead (Pb)-free, Bulk (all, except DJU, GJU) E03 = Lead (Pb)-free, Skin (DJU, GJU only) B19 = Tin/Lead, Bulk (all, except DJU, GJU) J03 = Tin/Lead, Skin (DJU, GJU only) Historical Part Number example: DPW-12M50L (will continue to be accepted) DPW-1 2M50 HISTORICAL MODEL RESISTANCE VALUE 1 Blank = Standard (Dash Number) (up to 3 digits) From 1 to 999 as applicable 1 = Ferrule Terminals L TOLERANCE CODE B19 PACKAGING Note • For additional information on packaging, refer to the Through-Hole Resistor Packaging document (www.vishay.com/doc?31544). Revision: 22-Oct-12 Document Number: 31040 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 D, G www.vishay.com Vishay Dale DIMENSIONS in inches (millimeters) Style 3 0.172 (4.37) Dia. Style 4 0.313 (7.95) A GLOBAL MODEL DJU DPW DPW..1 DPX DPX..1 DVY DVY..1 DZW DZW..1 DZZ DZZ..1 GJU GPW GPW..1 GPX GPX..1 GVY GVY..1 GZW GZW..1 GZZ GZZ..1 0.516 (13.11) 0.781 (19.84) A C B B D STYLE A B (1) C D 3 3 4 3 4 3 4 3 4 3 4 3 3 4 3 4 3 4 3 4 3 4 4.50 (114.30) 6.50 (165.10) 7.69 (195.33) 10.50 (266.70) 11.69 (296.93) 14.50 (368.30) 15.69 (398.53) 6.50 (165.10) 7.69 (195.33) 18.50 (469.90) 19.69 (500.13) 4.50 (114.30) 6.50 (165.10) 7.69 (195.33) 10.50 (266.70) 11.69 (296.93) 14.50 (368.30) 15.69 (398.53) 6.50 (165.10) 7.69 (195.33) 18.50 (469.90) 19.69 (500.13) 0.750 (19.05) 1.13 (28.70) 1.13 (28.70) 1.13 (28.70) 1.13 (28.70) 1.50 (38.10) 1.50 (38.10) 2.0 (50.80) 2.0 (50.80) 2.0 (50.80) 2.0 (50.80) 0.750 (19.05) 1.13 (28.70) 1.13 (28.70) 1.13 (28.70) 1.13 (28.70) 1.50 (38.10) 1.50 (38.10) 2.0 (50.80) 2.0 (50.80) 2.0 (50.80) 2.0 (50.80) 0.50 (12.70) 0.75 (19.05) N/A 0.75 (19.05) N/A 1.13 (28.70) N/A 1.56 (39.62) N/A 1.56 (39.62) N/A 0.50 (12.70) 0.75 (19.05) N/A 0.75 (19.05) N/A 1.13 (28.70) N/A 1.56 (39.62) N/A 1.56 (39.62) N/A N/A N/A 0.812 (20.62) N/A 0.812 (20.62) N/A 1.14 (28.96) N/A 1.14 (28.96) N/A 1.14 (28.96) N/A N/A 0.812 (20.62) N/A 0.812 (20.62) N/A 1.14 (28.96) N/A 1.14 (28.96) N/A 1.14 (28.96) Note (1) Dimensional tolerances are ± 0.016" (0.406 mm) or ± 1 %, whichever is greater. RATED POWER IN % DERATING 120 100 80 60 40 20 0 0 20 25 40 60 80 100 120 140 160 180 AMBIENT TEMPERATURE IN °C MARKING - Dale - Model - Value - Tolerance - Date code Revision: 22-Oct-12 Document Number: 31040 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000