Package Outline Dimensions SO-24 (Type TH) A3 D A SO-24 (Type TH) Dim Min Max Typ A 2.36 2.64 2.54 A1 0.10 0.30 0.20 A2 2.26 2.35 2.30 A3 0.97 1.07 1.02 b 0.39 0.48 c 0.25 0.31 D 15.20 15.60 15.40 e 1.27 BSC E 10.10 10.50 10.30 E1 7.40 7.60 7.50 h 0.25 0.75 L 0.70 1.00 L1 1.40 BSC θ 0° 8° All Dimensions in mm Seating Plane A2 A1 DETAIL 'A' h h E1 E c 0.25 L DETAIL 'A' 1 L1 e b 0 Suggested Pad Layout SO-24 (Type TH) C Y1 Dimensions C X Y Y1 Y Value (in mm) 1.270 0.680 2.200 11.300 X ALL DIMENSIONS ARE NOMINAL VALUES SHOWN IN MILLIMETERS Note: The suggested land pattern dimensions have been provided for reference only, as actual pad layouts may vary depending on application. These numbers may be modified based on user equipment capability or fabrication criteria. A more robust pattern may be desired for wave soldering and is calculated by adding 0.2 mm to the ‘Z’ dimension. For further information, please reference document IPC-7351A, Naming Convention for Standard SMT Land Patterns, and for International grid details, please see document IEC, Publication 97. 2016-04-27 1 of 1 www.diodes.com Package Outline Dimensions Suggested Pad Layout © Diodes Incorporated