DIO 3706 "Why Diodes" Discrete & Analog Flyer V11_- 04/06/2013 19:26 Page 1 DC-DC Why DIODES? Diodes Incorporated provides product designers with a broad range of Standard, Discrete, Logic and Analog IC semiconductor components that are renowned for their quality, high performance and optimized packaging. Synchronous and non-synchronous buck regulators up to 5A Single IC supply capability up to 60V High (VIN <=40V) and Low voltage (5.5V VIN) point of load converter families Application circuit capable of 100s of volts (reference AN39) Efficiency up to 96% ; switching frequency up to 4MHz; self-protected for over-current and thermal factors Simple three pin to high-functionality solutions Light-load, high-efficiency options Fit/form/functionally compatible with other DC-DC vendor solutions AC- DC High power factor correction ICs Broad range of AC-DC solutions including PSR (primary side regulation), SSR (secondary side regulation), PFC controllers, CC/CV feedback controllers and shunt regulators Ease of design/implementation Stable, accurate (~1%), low offset and temperature-corrected Fan/Motor Integrated drivers (internal main switches) and controller (external switches) solutions Integrated Hall sensor options Single-phase (H-bridge drive) and two-phase (dual switch) topologies Coil protection by lock detect, shutdown and auto-restart Reference designs addressing small appliance power supplies, chargers, consumer communications PWM and DC speed control Low audible and EMI noise signature Hall Sensors Optimized for USB, HDMI and slew-rate controlled load switch applications Omni-polar, uni-polar and latch type products With or without output discharge capability (crow-bar VOUT capacitor discharge function) Dual Hall plate for noise tolerant designs Current and thermally limited Current ratings from 200mA to 2.5A Single and dual channel Active-low and active-high enable logic options Industry-standard pinouts DBS Single and complementary outputs Hysteresis to prevent chatter and false triggering Programmable sensitivity options Low voltage to 28V supply capability Wide operating temperature range–up to +150°C SOT, DFN and CSP package options LED Drivers Polarization controllers AC (offline) dimmable and non-dimmable solutions for lamp (A19, GU10, PR38 etc), troffer and downlight applications LNB power management IC (PMIC) PFC pre-drivers/boost controllers DiSEqC™ LNB interface protocol capability Medium voltage drivers for MR16, linear fixtures IF multiplexer solutions – 4:2 switch matrix with 19dB gain; tone/voltage control Low voltage for flashlight, landscape and battery-powered applications GaAs/HEMTFET bias controllers for two to six FET stages Audio High-efficiency (~90%+) Class-D switching amplifier ICs Power outputs from 1.5W to 30W Mono and stereo products Filterless topology for low component count designs Power limiting and anti-saturation topologies for low THD Piezo/ceramic transducer drivers [email protected] Current sense applications from 10s of mA to 10s of A Integrated main switch converter (low component count) and controller ICs–enabling a broad applications base from <5W to >300W Load Switches FOR MORE INFORMATION E-MAIL: Current Monitors HiFi class, linear headphone amplifier series Reference design library, evaluation boards and design tools Mixed Technology Assembly Capability (ASMCC) Multi-die assembly for ease of assembly and space/footprint efficient designs Low level integration enabled by a broad portfolio of die types and package options Allows thermal matching, IP protection, BOM rationalization, ease of inventory management Broad market-appeal products also marketed as "Function-Specific Arrays" VERSION 1 DIO 3706 "Why Diodes" Discrete & Analog Flyer V11_- 04/06/2013 19:27 Page 2 Why DIODES? The best Analog ICs provide circuit designers with the most advantageous combination of efficiency, functionality and package size. Diodes offers a portfolio of devices that meet the requirements of a wide range of electronic applications by addressing these competing design criteria to produce elegant and practical solutions. As an expert in Analog electronics, Diodes works closely with customers and partners to define the precise needs of a particular application and to identify the most appropriate integrated solution. Bipolar Transistors MOSFETs Lowest on-state resistance (and VCE (SAT)) technology world-wide Highest current capability per package class Continuous current ratings to 7A; pulsed current ratings to >20A Broad portfolio of high-current to signal-class series Voltage ratings from 20 to 650V Continuous current ratings to >15A; pulsed current ratings to >60A Voltage ratings from 12 to 500V Single, dual, complementary and H-bridge (quad) products Optimized MOSFET/IGBT gate driver series High-gain and Super-β products to minimize base drive requirements Broad portfolio of high-current to signal-class series Single, dual, complementary and H-bridge (quad) products SBR® (Super Barrier Rectifier), Schottky and PN Rectifiers Industry-standard package options IntelliFET®–self protected MOSFET series DIOFET™–integrated drain-source Schottky diode for DC-DC converters Logic Products SBR–"next generation" Schottky series Lower VF (higher current ratings) compared with like die-size technologies Voltage ratings to 400V Current ratings from 200mA to 60A LVC, AUP, AHC, AHCT, HC and HCT logic platforms DIODESTAR™ 600V PFC boost diode series (competes with SiC) Industry-standard package options and smallest single-and dual-gate package options per class Solar bypass diode series and optimized packaging Low temperature coefficient of leakage current, providing improved thermal stability Single and dual gate products Standard logic series–quad, hex gates Fit/form/functionally compatible series and enhanced series–faster switching and wider operating voltage range Inputs can exceed rail voltage-level shift capability Single and common cathode options Protection Products Voltage Regulators Current ratings from 50mA to 5A Low capacitance ESD protection products–protect up to 30kV Voltage ratings to 32V Uni-directional and bi-directional LDO, quasi-LDO and standard voltage drop-out topologies Single, dual and array products CMOS and bipolar platforms Power TVS and TSPD platforms rated to 3kW pulse power Low-quiescent and low-noise families Transient Surge Protection Device [TSPD] to 300A pulse current rating Industry-standard part numbers and packages PowerDI package and industry-standard package series Op-Amps and Comparators Voltage References and Shunt Regulators 431, 4040, 4041 industry-standard part numbers Industry-standard device series Low knee current series Single, dual and quad devices 1.225, 1.24V, 1.25V, 2.5V series Bipolar and BiFET input stages 600mV low core voltage series–single and dual Low voltage up to 32V capable Tolerance down to 0.5% Rail-to-rail input and output categories FOR MORE INFORMATION E-MAIL: [email protected] SBR and IntelliFET are registered trademarks of Diodes Incorporated. DIODESTAR and DIOFET are trademarks of Diodes Incorporated.