LCD-240H064G Vishay 240 x 64 Graphic LCD FEATURES • Type: Graphic • Display format: 240 x 64 dots • Built-in controller: RA8822 (or equivalent) • Duty cycle: 1/64 • + 5 V power supply (2.7 V to 5.0 V selectable) • Built-in N.V. • Chinese version • Compliant to RoHS directive 2002/95/EC MECHANICAL DATA ITEM ABSOLUTE MAXIMUM RATINGS STANDARD VALUE Module Dimension 180.0 x 65.0 Viewing Area 133.0 x 39.0 Dot Size 0.49 x 0.49 Dot Pitch 0.53 x 0.53 Mounting Hole 176.0 x 54.0 Character Size N/a STANDARD VALUE UNIT ITEM mm SYMBOL UNIT MIN. TYP. MAX. Power Supply VDD to VSS 4.75 5.0 5.25 Input Voltage - 0.3 - VDD VI V Note • VSS = 0 V, VDD = 5.0 V ELECTRICAL CHARACTERISTICS STANDARD VALUE ITEM SYMBOL CONDITION UNIT MIN. Input Voltage Supply Current Recommended LC Driving Voltage for Normal Temperature Version Module TYP. MAX. VDD L level 0.7 VDD - VDD VIO H level 0 - 0.3 VDD IDD VDD = + 5 V - 29.0 - VDD to V0 V mA - 20 °C 13.0 13.5 14.1 0 °C 12.5 13.1 13.7 25 °C - 12.5 - 50 °C 11.1 12.2 13.0 70 °C 9.1 11.6 12.8 V LED Forward Voltage VF 25 °C - 4.2 4.6 LED Forward Current IF 25 °C - 450 900 mA CCFL Forward Voltage VF 25 °C - 215 650 VRMS V CCFL Forward Current IF 25 °C - - 5.0 mA EL Power Supply Current IEL VEL = 110 VAC, 400 Hz - - 5.0 mA OPTIONS PROCESS COLOR TN BACKLIGHT STN Gray STN Yellow STN Blue FSTN B&W x x x x STN Color None LED EL CCFL x x x x For detailed information, please see the “Product Numbering System” document. Document Number: 37372 Revision: 02-Apr-09 For technical questions, contact: [email protected] www.vishay.com 1 LCD-240H064G 240 x 64 Graphic LCD Vishay INTERFACE PIN FUNCTION PIN NO. 1 SYMBOL FUNCTION A Power supply for B/L 2 VSS Ground 3 VDD Power supply for logic 4 V0 Operating voltage LCD driving 5 WR 8080 family: Read signal/6800 family: Enable clock 6 RD 8080 family: Write signal/6800 family: Read/write signal 7 CE Chip enable 8 C/D H: Instruction/L: Data 9 VEE Negative voltage output 10 RES Reset 11 DB0 DB0 Data bus line 12 DB1 DB1 Data bus line 13 DB2 DB2 Data bus line 14 DB3 DB3 Data bus line 15 DB4 DB4 Data bus line 16 DB5 DB5 Data bus line 17 DB6 DB6 Data bus line 18 DB7 DB7 Data bus line 19 Busy RA8802 statis 20 INT Programable interrupt output DIMENSIONS in millimeters 0.53 0.49 0.53 0.49 180.0 ± 0.5 13.3 154.6 23.5 133.0 (VA) 26.42 127.16 (AA) Dot Size 2.54 10.1 Max. 5.1 54.0 7.0 11.5 33.88 (AA) 16.0 Max. 11.0 20 19 4 x Ø 1.0 PTH 2.0 www.vishay.com 2 22.86 (P2.54 x 9) 13.0 17.5 15.56 13.0 6.2 52.6 39.0 (VA) 65.0 ± 0.3 2 1 5.5 4.13 3.5 176.0 4 x Ø 3.5 PTH 4 x Ø 7.0 PAD For technical questions, contact: [email protected] 20 x Ø 1.0 PTH 20 x Ø 1.8 PAD 1.6 LED B/L 1.6 EL or NO B/L Document Number: 37372 Revision: 02-Apr-09 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000