IS310/IS320 REQUEST-TO-EXIT PIR Honeywell’s Request-to-Exit (RTE) sensors offer basic and full-featured models to suit every access control application. The quick-install sensors are extremely flexible, provide a generous amount of wiring room and contain built-in internal “tamper proof” shutters to enable precise target area detection. FEATURES IS310: IS320: • Adjustable relay time (0.5 - 64 seconds) IS320 includes the same features as IS310, plus: • Micro-based signal processing • Piezo Sounder with volume control • Adjustable “tamper proof” shutters— to enable precise target area detection • Door contact input • Reader/keypad/keyswitch input • Two “Form C” outputs • Remote arming and sounder inputs • Swivel optics – allow for offset mounting • Cover tamper • Patented black bug guard • Available in white or black TAMPER SWITCH DIP SWITCH PIR 1 2 3 2 4 3 L S + + + + + + + + 1 ON + + + WALL ON L S L S WALL L S 5 CEILING TERMINAL BLOCK DIP SWITCH PIR CEILING TERMINAL BLOCK 4 6 + + + + + + + + SOUNDER 8 ROTATION LOCKING SCREW 7 6 + + + + + 5 LED (UNDER PIR COVER) SOUNDER VOLUME CONTROL LED (UNDER PIR COVER) ROTATION LOCKING SCREW IS310/IS320 REQUEST-TO-EXIT PIR SPECIFICATIONS RANGE LON SHO GR ANG E 5.5' HIG AN RT R H SE GE CUR ITY 2' 15.8' 8.4' • Range: From 5.5' x 2' ( 1.67m x 0.6m) up to 15.8' x 8.4' (4.8 x 2.5m) depending on mounting height MOUNTING HEIGHT • Mounting Height: 7' to 15' (2.13m x4.51m) • Detectable Walk Rate: 0.5'-10'/sec • Signal Processing: RTE and Security modes • Temperature Compensation: Advanced dual-slope • Alarm Relay: Two “Form C” outputs • Input Voltage: 12-24 volts AC or DC • Standby Current: 35mA • Indicators: Green (ready) LED • Operating Temperature: 14º F to 122º F (-10º C to 50º C) • Dimensions: 7" L x 2" H x 2" D (17.7cm x 5cm x 5cm) • Sounder: Adjustable to 60 dB@10' (3.05m)* • Cover Tamper Switch: contact rating 100mA 30VDC* * IS320 model only 15 FT (4.57 M) MAX. 7 FT (2.13 M) MIN. IS310/IS320 REQUEST-TO-EXIT PIR SPECIFICATIONS 7.146 (181.50) 1.855 (47.11) 1.739 (44.18) Clearance for the head of a #6 Pan Head Screw .584 (14.84) All mounting holes for #6 Pan Head Screws .118 (3.00) .236 (6.00) .079 (2.01) 3.280 (83.31) View showing sensor mounting plate with front cover and PCB removed WIRE CHANNELS .360 (9.14) IS310/IS320 REQUEST-TO-EXIT PIR ORDERING IS310WH (0-000-361-01) Entry Level RTE - White IS310BL (0-000-361-02) Entry Level RTE - Black IS320WH (0-000-361-03) Fully Featured RTE - White IS320BL (0-000-361-04) Fully Featured RTE - Black RTE6PKWH Six pack of IS310WH - White RTE6PKBK Six pack of IS310BL - Black ACCESSORIES IS310WHTP (5-531-395-01) Trim Plate for IS310 and IS320 - White IS310BLTP (5-531-395-02) Trim Plate for IS310 and IS320 - Black IS310WHTP Automation and Control Solutions Honeywell Security & Communications 2 Corporate Center Dr. Suite 100 P.O. Box 9040 Melville, NY 11747 www.honeywell.com IS310BLTP L/IS310320/D October 2008 © 2008 Honeywell International Inc.