Cannon Combo-D Part Number Configurator US Version Connect with your ITT Cannon representative today or visit us at www.ittcannon.com DBM E 9C4 Product Family Designator D*M = Solder Cup (Industrial & Space/Non-Magnetic) D*MM = Solder Cup (Military / Hi-Rel, 50 microinch gold plating) D*A=Crimp Hardware Modifier blank = .120” (3.05mm) Through Hole C = 90° Metal Bracket, #4-40 Fastener and Boardlock D = 90° Metal Bracket, #4-40 Fastener and #4-40 Screwlock E = #4-40 Clinchnut G = 90° Metal Bracket, #4-40 Fastener, #4-40 Screwlock, Boardlock H = .300” (7.6mm) Standoff, #4-40 Screwlock P J Cannon Combo-D Part Number Configurator European Version K87 DBM A101=Carbon steel, Yellow chromate over cadmium A197=Carbon steel, Pure Tin over Nickel (socket side only) RoHS Hardware Modifier K87=Carbon steel Pure Tin over Nickel (pin shell with grounding dimples) RoHS F225=Stainless steel, Passivated RoHS D*M = D*M Combo-D * = Shell size – E, A, B, C and D blank = 3,05mm (.120”) Through Hole E = #4-40 Clinchnut (solder cup, straight solder pin and 1A0N) NMBK52=Gold plated, non-magnetic for space applications N = 7,66 mm (.300”) with #4-40 post and pushfit, only OL4 Q = 7,66 mm (.300”) M3 standoff, only OL4 Contact Termination Code T = 7,66 mm (.300”) M3 post, only OL4 blank =Solder cup (D*M/D*MM), Crimp (D*A) J =90° PCB signal contact, (ø.030” × .170” long) K = .162” (4.11mm) Through Hole L = 90° Metal Bracket, M3 Fastener, Boardlock N = .300” (7.6 mm) Standoff, #4-40 Screwlock, Boardlock O = 90° Metal Bracket, M3 Fastener, M3 Screwlock P = 90° Metal Bracket, #4-40 Fastener Q = .300” (7.6 mm) M3 Standoff S = 90° Metal Bracket, M3 Fastener T = .300” (7.6 mm) M3 Standoff U = .300” (7.6 mm) Standoff, M3 Screwlock and Boardlock Connect with the experts. V = .300” (7.6 mm) #4-40 Standoff X = M3 Clinchnut Layout (Example: 5W1- Total number of 5 contacts with 1 size 8 cavity) From rocket launches and satellite systems, to ruggedized military transports and aerospace applications, ITT Cannon’s D-Subminiature product line connects the world‘s most important information with the people who need it. Y = Dual Float Mount Shell Size E:2W2, 2WK2, 5W1 Z = .300” (7.6mm) #4-40 Standoff, Boardlock Shell Size A:3W3, 3WK3, 7W2, 11W1 P Product Family Designator J = 90° Metal Bracket, M3 Fastener, M3 Screwlock, Boardlock W = .300” (7.6mm) Standoff, M3 Screwlock 9C4 Shell Material and Plating Modification Code blank=Carbon steel, Yellow chromate over zinc E N =Straight PCB signal contact, (ø.030” × .178” long) V =90° PCB signal contact, (ø.024” × .157” long) U = 7,66 mm (.300”) standoff, M3 Post with pushfit, only OL4 V = 7,66 mm (.300”) #4-40 standoff, only OL4 X = M-3 Clinchnut (solder cup, straight solder pin and 1A0N) Y = Dual Float Mount, only solder cup Y =Straight PCB signal contact, (ø.024” × .178” long) Z = 7,66 mm (.300”) #4-40 with pushfit, only OL4 Contact Gender Layout (Total number of contacts + number of size 8 cavities) P =Pin /Male (plug) S =Socket /Female (receptacle) Shell Size E:2W2, 2WK2, 5W1 Shell Size A:3W3, 3WK3, 7W2, 11W1 Shell Size B:5W5, 9W4, 13W3, 17W2, 21W1 Shell Size C:8W8, 13W6, 17W5, 21WA4, 25W3,27W2 Shell Size D:24W7, 36W4, 43W2, 47W1 W= Empty size 8 cavities Shell Size B:5W5, 9W4, 13W3, 17W2, 21W1 C= 75 Ohm Coax installed (straight or 90°) Shell Size C:8W8, 13W6, 17W5, 21WA4, 25W3,27W2 X= 50 Ohm Coax installed (straight or 90°) H= High power installed (straight) Shell Size D:24W7, 36W4, 43W2, 47W1 P= High power installed (Euro, 90°only) V= High voltage installed (available in straight PC only) W= Empty size 8 cavities C= 75 Ohm Coax installed (straight or 90°) X= 50 Ohm Coax installed (straight or 90°) H= High power installed (straight) P= High power installed (Euro, 90°only) G= Guide pin or guide socket installed R= Mini High Power 90° installed V= High voltage installed (available in straight PC only) Contact Gender P = Pin /Male (plug) G= Guide pin or guide socket installed S = Socket /Female (receptacle) R= Mini High Power 90° installed CHINA—Shenzhen City GERMANY—Weinstadt HONG KONG ITALY—Lainate Code only applicable for Pressfit High Power size 8 contact +86.755.2726.7888 +49.7151.699.0 +852.2732.2720 +39.02938721 P00 =Pessfit High power PCB dia 2,9 mm JAPAN—Kanagawa KOREA—Seoul TAIWAN—Taipei UK—Basingstoke P01 =Pessfit High power PCB dia 3,1 mm +81.462.57.2010 +82.2.7027111 +886.2.25452020 +44.1256.311200 P02 =Pessfit High power PCB dia 3,5 mm USA—Watertown, CT +1.860.274.9681 USA—Irvine, CA +1.800.854.3028 The “ITT Engineered Blocks“ symbol, “Engineered for life”, “ITT” and “Cannon“ are registered trademarks of ITT Corporation. Specification and other data are based on information available at the time of printing, and are subject to change without notice. Images Courtesy of Department of Defense and NASA. D-Sub Brochure.indd 2-5 © 2016 ITT Corporation, Inc. D-Subminiature Product Overview | 20160115 P00 1A5N A191 K87 146 PCB Mounting Method 146=Pushfit for PCB hole dia. 3,0 mm 161=Pushfit for PCB hole dia. 3,2 mm, straight version only 162=Pushfit for PCB hole dia. 3,2 mm, 90° version only Cover headline Cover headline D-Subminiature Product Overview Shell Plating Modification Code blank=Yellow chromate over zinc A197=Pure Tin over Nickel (socket side only) RoHS K87=Pure Tin over Nickel (pin shell with grounding dimples) RoHS Contact Gender blank=performance class 3 (50 mating cycles) A191=performance class 2 (200 mating cycles) A190=performance class 1 (500 mating cycles) Contact Tail Modifier blank=Solder cup (size 8 contacts not loaded on these versions) OL2=Not standard, please call factory OL3=Solder pin /pc tail, straight 1A0N = Without mouting bracket, hole dia. 3,05 mm 1A5N = Plastic bracket with bushing dia. 3,05 mm 1A6N = Plastic bracket with #4-40 threaded post 1A7N = Metal bracket and #4-40 captive nut 1A8N = Metal bracket with #4-40 threaded post 1A9N = Metal bracket and M3 captive nut 1ADN =Plastic bracket with grounding bracket and bushing dia. 3,05 mm 1AFN = Metal bracket with bushing dia. 3,05 mm 1AGN =Plastic bracket with grounding bracket and M3 threaded post 1AHN =Metal bracket with M3 threaded post 1AJN = Plastic bracket with grounding bracket and #4-40 threaded post 1APN = Plastic bracket with M3 threaded post – Not available, please use 1AHN instead 1ATN = Plastic bracket and M3 captive nut – Not available, please use 1A9N instead 1AUN =Plastic bracket and #4-40 captive nut 1AVN =Plastic bracket with grounding bracket and captive M3 nut – Not available, please use 1A9N instead 1AWN =Plastic bracket with grounding bracket and captive #4-40 nut – Not available, please use 1A7N instead 1AEN = 90° low profile metal bracket with M3 captive nut 1AAN =Low profile metal bracket and #4-40 captive nut – Not available, please use 1AHN instead 1ABN = Low profile metal bracket and M3 threaded post – Not available, please use 1AHN instead 1ACN =Low profile metal bracket and #4-40 threaded post – Not available, please use 1AHN instead 1ALN = Low profile metal bracket and bushing dia. 3,05 mm – Not available, please use 1AHN instead www.ittcannon.com 1/6/16 4:28 PM D-Subminiature Connectors Key Markets & Applications ITT Cannon‘s D-Subminiature product line is engineered to perform in the harshest environments. Originally designed for aircraft radio systems, Cannon‘s D-Subminiature became the first multi-purpose interconnect solution of its kind, ideal for multiple markets and applications. From rocket launches and satellite systems, to rugged military transports and commercial avionics, its versatility has made this Cannon invention the most widely used connector in the world. These high reliability D-Sub connectors are the finest quality connectors and are qualified to Mil-C-24308. D*MAM crimp connectors are equivalent to MIL-C24308 qualified versions (except for documentation). D*MM straight PCB connectors are equivalent to MIL-C-24308 qualified versions (except for documentation). GD* connectors provide high-density and moisture protection. 2D connectors feature double the contact density in the same insert area. MIL-C-24308 D*MAM D*MM GD* x x x x 2D x x D*H x x x AWG 18 - 28 500 available up to AWG 20 500 no AWG 18 - 30 500 no AWG 18 - 30 500 no 9, 15, 25, 37, 50, 15, 26, 44, 62, 78,104 (high density) and Combo D 9, 15, 25, 37, 50 9, 15, 25, 37, 50, 15, 26, 44, 62, 78,104 (high density) Dielectric Withstanding Voltage (1) 1000 VAC 750 VAC Current Rating (Amps) 7.5 A max. 7.5 A max. 10 milli Ohm max. 15 milli Ohm max. -55°C/125°C x x D*M straight PCB connectors are equivalent to MIL-C-24308 qualified versions (except for finishes). D*MA D*M x x A broad range of D-Sub connectors are available with stainless steel shells for corrosion resistance. Stainless Steel x Series D*JT planar array filter connectors provide excellent protection against EMI and RFI. D*JT D*NE are special low profile 90° solder pin connectors according to the CECC75 301 802 Eurostyle. D*NE D*NG pressfit connectors provide a low-cost alternative to traditional through hole solder contacts (straight only). D*NG Speedy D connectors terminate ribbon cables without stripping and without splicing. D*SF The D*W connector provides IDC technology. Stranded or solid wires could be terminated. D*W D*U is a low-cost, crimp type D-Subminiature series. D*U D* connectors are available for high performance uses according to DIN 41652. D* Filter connector series D*JK are designed for commercial applications, providing EMI/RFI protection. D*JK ZD* connectors are available for applications where price is the primary driver. ZD*A high density connectors are available for applications where price is the primary driver. D*A crimp connectors are available for applications where price is the primary driver. Combo D connectors offer an industry standard shield I/O interconnect, with the flexibility of a customized special. ZD* ZD*A D*A Combo D x x x x x x x x x AWG 22 -2 6 500 available AWG 20 - 28 200, 500 available AWG 20 - 28 200, 500 available AWG 18 - 30 50, 200, 500 yes x x x AWG 8 - 26 200, 500 no 9, 15, 25, 37, 50 9, 15, 25, 37, 50, 15, 26, 44, 62, 78,104 (high density) and Combo D 9, 15, 25, 37, 50 2W2, 2WK2, 3W3, 3WK3, 5W5 x x D*MA crimp connectors are equivalent to MIL-C24308 qualified versions (except for finishes). x x AWG 20 - 30 50, 200, 500 yes x x x 50, 200, 500 yes x x AWG 26 - 28 50, 200, 500 yes AWG 18 - 30 50, 200, 500 available 9, 15, 25, 37 9, 15, 25, 37, 50 9, 15, 25, 37 9, 15, 25, 37 1000 VAC 1200 VAC 780 VAC 5 A at 25°C 3.5 A at 70°C 5.0 A at 25°C 3.5 A at 70°C 25 milli Ohm max. x x 50, 200, 500 yes x x AWG 20 - 28 50, 200, 500 yes x x AWG 20 - 28 200, 500 no x x AWG 20 - 28 50, 200 yes x x AWG 24 - 26 50, 200 yes x x AWG 20 - 28 50, 200 yes 9, 15, 25, 37, 50 9, 15, 25, 37, 50 9, 15, 25, 37, 50 9, 15, 25, 37, 50 15, 26, 44, 62, 78 9, 15, 25, 37, 50 1000 VAC 1000 VAC 1250 VAC 250 VDC 1000 VAC 500 VAC 500 VAC 1.5 A max. 3.0 A (AWG 20) 0.8 A (AWG 30) 5.0 A max. 5.0 A at 25°C 3.5 A at 70°C 5.0 A max. 5.0 A max. 2.0 A max. 5.0 A max. 10 milli Ohm max. 15 milli Ohm max. 15 milli Ohm max. 15 milli Ohm max. 10 milli Ohm max. 20 milli Ohm max. 15 milli Ohm max. 15 milli Ohm max. -55°C/125°C -55°C/125°C -55°C/125°C -55°C/125°C -55°C/125°C -55°C/125°C 10 milli Ohm max. (Signal contacts) -55°C/125°C -55°C/105°C -55°C/105°C -55°C/105°C AWG 8 - 26 50, 200, 500 yes (Mil: no) E: 2W2; 2WK2; 5W1 A: 3W3; 3WK3; 7W2; 11W1 B: 5W5; 9W4; 13W3; 17W2; 21W1 C: 8W8; 13W6; 17W5; 21WA4; 25W3; 27W2 D: 24W7; 36W4; 43W2; 47W1 varies 7.5 A max. (Signal contacts) 5.0 A max. (Coaxial contacts) 40 A max. (High power contacts) 5.0 A max. (HV contacts) 10 milli Ohm max. (Signal contacts) -55°C/125°C (Mil: 150°C) AWG 20 - 28 500 no AWG 20 500 no 9, 15, 25, 37, 50, 15, 26, 44, 62, 78,104 (high density) 9, 15, 25, 37, 50 9, 15, 25, 37, 50, 15, 26, 44, 62, 78,104 (high density) 19, 31, 52, 79, 100 9, 15, 25, 37, 50, 15, 26, 44, 62, 78,104 (high density) 1000 VAC 1000 VAC 1700 VAC 1000 VAC 1000 VAC 1000 VAC 1000 VAC 1700 VDC 7.5 A max. 7.5 A max. 7.5 A max. 7.5 A max. (Standard Density) 5 A max. 2A max. (BR Series) 7.5 A max. 7.5 A max. 7.5 A max. 10 milli Ohm max. (Signal Contacts) -50°C/150°C 10 milli Ohm max. (Signal Contacts) -50°C/150°C 10 milli Ohm max. 9 milli Ohm max. 10 milli Ohm max. 7.5 milli Ohm max. 10 milli Ohm max. -54°C/125°C 10 milli Ohm max. (Signal Contacts) -50°C/150°C -65°C/150°C -55°C/125°C -55°C/125°C -55°C/125°C -55°C/125°C 500 VDC 5.0 A max. (Signal contacts) 40 A max. (High power contacts) 10 milli Ohm max. (Signal Contacts) -55°C/125°C 48 hrs 48 hrs 48 hrs 48 hrs 48 hrs 48 hrs 48 hrs 48 hrs 48 hrs 48 hrs 20 hrs 12 hrs 20 hrs 20 hrs 20 hrs 20 hrs 20 hrs 20 hrs 12 hrs 12 hrs 12 hrs 20 hrs (Mil: 48 hrs) copper alloy low carbon steel steel low carbon steel/brass steel steel steel steel steel steel steel steel steel yellow chromate over cadmium passivated tin tin tin tin tin tin tin tin tin tin tin Thermoplastic, UL 94V-0 compression glass Thermoplastic, type PCT UL 94V-0 Thermoplastic, type PCT UL 94V-0 Thermoplastic, type PCT UL 94V-0 Thermoplastic, type PCT UL 94V-0 glass filled nylon Thermoplastic, type PCT UL 94V-0 Thermoplastic, type PCT UL 94V-0 Thermoplastic, type PCT UL 94V-0 Thermoplastic, type PCT UL 94V-0 Thermoplastic, type PCT UL 94V-0 Thermoplastic, type PCT UL 94V-0 Thermoplastic, type PCT UL 94V-0 Thermoplastic, type PCT UL 94V-0 Thermoplastic, type PCT UL 94V-0 Thermoplastic, type PCT UL 94V-0 Thermoplastic, type PCT UL 94V-0 Thermoplastic, type PCT UL 94V-0 Thermoplastic, type PCT UL 94V-0 Color Contact white machined n/a machined black machined black machined black machined white machined black twist pin white machined black machined black or white machined black machined black stamped black stamped black stamped black stamped steel RoHS - Tin/Nickel yellow chromate over cadmium glass filled Thermoplastic, type PCT UL 94V-0 black stamped steel yellow chromate over cadmium or zinc steel RoHS - Tin/Nickel yellow chromate over cadmium or zinc steel yellow chromate over cadmium or zinc steel RoHS - Tin/Nickel yellow chromate over cadmium or zinc stainless steel electro-deposited tin over cadmium over copper flash steel RoHS - Tin/Nickel yellow chromate over cadmium or zinc low carbon steel gold over copper steel RoHS - Tin/Nickel yellow chromate over cadmium or zinc black machined white machined black stamped black stamped black machined Material copper alloy steel copper alloy copper alloy copper alloy copper alloy copper alloy copper alloy copper alloy copper alloy copper alloy copper alloy copper alloy copper alloy copper alloy copper alloy copper alloy copper alloy copper alloy copper alloy copper alloy gold over copper electro-deposited tin over cadmium over copper flash 1.27 μm gold over nickel 1.27 μm gold over nickel 1.27 μm gold over nickel gold over nickel gold plate gold over nickel gold over nickel gold over nickel gold over nickel gold over nickel gold over nickel (standard); gold over PdNi gold over nickel gold over nickel in contact area, balance tin gold over nickel gold over nickel gold over nickel gold over nickel gold over nickel gold over nickel x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x Layout Operating Temperature Salt Spray Test Resistance in Hours Shell Material Finish Insulator Military Vehicles Finish Commercial Avionics Hermetic Military D connectors are designed to meet environmental conditions of extreme pressure differential. D*NM Series X x x x x Space Military/Aerospace Medical/Food Processing Mass Transit Industrial Telecom Wire Gauge Range AWG Mating Cycles RoHS Compliant Contact Resistance Space & Satellites D*M, D*MM, D*MA with NM, NMB option connectors are used when non magnetic characteristics are required. Contact Termination/Styles Crimp Solder Pot Straight Solder Right Angled Solder IDC (insulation displacement connection) Wire Wrap Coax Fiber Optic High Power High Voltage Press Fit Eyelet x x x x x x x x x x x x x x x x x x x x x x x x glass filled Thermoplastic, type PCT UL 94V-0 black stamped brass (male) phosphore bronze (female) gold over nickel in contact area, balance tin x x x x x x x x x x x x x x x x x X (1) at sea level www.ittcannon.com D-Sub Brochure.indd 6-9 1/6/16 4:29 PM