ca_C1-C61.qxd:Layout 1 2/10/11 9:32 AM Page 1 ca_C1-C61.qxd:Layout 1 2/10/11 9:32 AM Page 7 D*M Combo D-Subminiature Connector Designator for High Reliability Applications Solder Cup, Crimp, and PCB Type, Combo-D’s with Machined Contacts Typical Part Number: DBM C 13X3 S J 101 Product Family Designator D*M • Shell Modifier (Standard)* = Yellow chromate over zinc shells = Solder Cup & Std. Density PCB Industrial/Commercial Version A101 = Yellow Chromate over Cadmium shells D*MM = Solder Cup & PCB Mil version (50 micro-inch gold contact/plating) F225 = Stainless steel shells (RoHS) (Non Hardware Versions Only) D*A A197 = Pure Tin over Nickel Shells (Sockets only, RoHS through hole versions only) = Crimp signal contacts K87 = Pure Tin over Nickel Shells w/grounding dimples (Pins only, RoHS) Hardware Modifier* =0.120” (3,05mm) Through Hole • PC Tail Modifier (Standard)* B =4-40 Female Screwlock = Solder Cup (D*M/D*MM; Crimp, D*MA, D*MAM) C =90° Metal Bracket, 4-40 Fastener, & Boardlock (D*M, D*MM Only) J = 90° Std. PCB signal contact (.170" lg by .030" ) D =90° Metal Bracket, 4-40 Fastener and 4-40 Screwlock (D*M, D*MM Only) N = Straight Std. PCB signal contact (.178" lg by .030 Ø) V = 90° Euro PCB signal contact (.157" lg by .024 Ø) E =4-40 Clinchnut Y = Straight Euro PCB signal contact (.178" lg by .024 Ø) G =90° Metal Bracket, 4-40 Fastener, 4-40 Screwlock, Boardlock (D*M, D*MM) H =.300” (7.6mm) Standoff, 4-40 Screwlock (D*M, D*MM US Only) • Gender I = 90° metal bracket, .120" (3.05mm) through hole P = Male Plug, Pin K =0.162” (4,11mm) Through Hole S = Female Receptacle, Socket C N =.300” (7.6mm) Standoff, 4-40 Screwlock, Boardlock (D*M, D*MM Only) S =90° Metal Bracket, M-3 Fastener (D*M, D*MM) V =.300” (7.6mm) 4-40 Standoff (D*M, D*MM Only) X =M3 clinchnut Combo-D Size 8 Contact Designators: W = w/o Contacts (letters below denote with contacts) C = 75 Ohm Coax Contacts Installed, stamped X = 50 Ohm Coax Contacts Installed, stamped H = High Power Installed V = High Voltage Installed (Cable and straight PCB only) R = Mini Hi Power 90° Installed F = Fiber Optic G = Guide Pin P = High Power Installed (European) M = 50 ohm coax contact installed, machined, 50 microinches gold N = 50 ohm coax contact installed, machined, 30 microinches gold Y =Dual Float Mount Z =.300” (7.6mm) 4-40 Standoff, Boardlock (D*M, D*MM Only) * =Shell Sizes are E, A, B, C, D * Note: Combo-D hardware and finishes are available on D*M standard density 9, 15, 25, 37 and 50 position connectors Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com C-7 D Sub • Layouts - *Combo D E-2W2; 2WK2K, 9 (D*M) A- 5W1; A- 3W3, 3WK3, 7W2, 11W1, 95 B- 5W5, 9W4, 13W3, 17W2, 21W1, 25 C- 8W8, 13W6, 17W5, 21WA4, 25W3, 27W2, 37 D- 24W7, 36W4, 43W2, 47W1, 50 P =90° Metal Bracket, 4-40 Fastener (D*M, D*MM) ca_C1-C61.qxd:Layout 1 2/10/11 9:32 AM Page 8 Military/Hi-Reliability D*M D-Subminiature Ordering Information - Connector Designator For Hi-Reliability Crimp, Solder Cup and PCB Type, Standard & Hi-Density Connectors with Machined Contacts Typical Part Number: DBM* E 25 P M NMB A197 FO • Product Family Designator FO - Without contacts - D*MA crimp versions only D*M • Modifier (standard) Yellow chromate over zinc shells A197 Tin over Nickel shells (receptacles only) (RoHS) F224 Epoxy sealing of insulator to shell and contacts F225 303 Stainless steel, passivated (Thru hole only) K52 50 gold over copper plating on shells and contacts K87 Tin, dimpled shells (plugs only) (RoHS) (US only) K128 K52 gold plating on Aluminum Shells, Nickel Under Plate F216 Machined Aluminum Shells, Nickel Under Plate A101 Yellow chromate over cadmium = Solder Cup & Std. Density PCB Industrial/Commercial Version (without spacer for straight PCB) D*MM = Solder Cup & PCB Mil version (50 micro-inch gold contact/plating, with spacer for straight PCB) D*MA = Crimp & Hi-Density PCB Industrial/ Commercial Version D*MAM = Crimp/Hi-Density PCB Mil version (50 microinch gold contact plating) • Hardware Modifier =0.120” (3,05mm) Through Hole B =4-40 Female Screwlock • Residual Magnetism/Outgassing E =4-40 Clinchnut NMB- 200 Gamma Max. Residual Magnetism/<1% TML K =0.162” (4,11mm) Through Hole X =M3 clinchnut • PC Tail Modifier (Standard Density) Y =Dual Float Mount = Solder cup (D*M/D*MM) * =Shell Sizes are E, A, B, C, D C • Layouts *Standard Density (D*M, D*MM) 9, 15, 25, 37, 50 *High Density (D*MA, D*MAM) 15, 26, 44, 62, 78, 104 B = Straight PCB contact (.99" - .154" lg by .040" Ø) D Sub A = 90° PCB contact w/Plastic Bracket (.99" - .154" lg by .040" Ø) • Gender P = Male Plug, Pin S = Female Receptacle, Socket D = 90° PCB contact w/Plastic Bracket (.99" - .154" lg by .030" Ø) C = 90° PCB contact w/o Plastic Bracket (.99" - .154"" lg by .040" Ø) E = Straight PCB contact (.99" - .154" lg by .030" Ø) F = 90° PCB contact w/o Plastic Bracket (.99" - .154" lg by .030" Ø) G = 90° PCB contact w/Plastic Bracket (.130" - .185" lg by .040" Ø) H = Straight PCB contact (.130" - .185" lg by .040" Ø) K = 90° PCB contact w/o Plastic Bracket (.130" - .185" lg by .040" Ø) L = 90° PCB contact w/Plastic Bracket (.130" - .185" lg by .030" Ø) M = Straight PCB contact (.130" - .185" lg by .040" Ø) P = 90° PCB contact w/o Plastic Bracket (.130" - .185" lg by .030" Ø) R = 90° PCB contact w/o Plastic Bracket (.155" - .210" lg by .030" Ø) S = 90° PCB contact w/Plastic Bracket (.155" - .210" lg by .030" Ø) W = 90° PCB contact w/Plastic Bracket (.155" - .210" lg by .040" Ø) X = Straight PCB contact (.155" - .210" lg by .030" Ø) Z = Straight PCB contact(.155" - .210" lg by .040" Ø) * 104 Position Available in Machined Aluminum Shells only F179 = Straight square PCB or wire wrap contact (.375" by .024") * = Crimp (D*MA, D*MAM) F179A = Straight square PCB or wire wrap contact (.500" by .024") PC Tail Modifier (High Density) * = Shell Sizes are E, A, B, C, D, F (F available in high density aluminum only) **L = 90° PCB contact w/Plastic Bracket (.140" lg by .021" Ø) ** = Legacy Tail Modifiers “D”, “E” and “F” have been replaced by Tail Modifiers “L”, “M” and “P” respectively **M = Straight PCB contact (.140" lg by .021" Ø) **P = 90° PCB contact w/o Plastic Bracket (.140" lg by .021" Ø) R = 90° PCB contact w/o Plastic Bracket (.197" lg by .021" Ø) S = 90° PCB contact w/Plastic Bracket (.197" lg by .021" Ø) Z/OL3 = Straight PCB contact (.197" lg by .021" Ø) Dimensions shown in inches (mm) Specifications and dimensions subject to change C-8 www.ittcannon.com