CTSP www.vishay.com Vishay Dale Thin Film Molded, Commercial, Single In-Line Thin Film Resistor, Through Hole Network (Custom) FEATURES • Lead (Pb)-free gold plated terminals standard • Gold to gold terminations (no internal solder) • Exceptional ratio stability over time and temperature (R ± 0.015 % 2000 h at 70 °C) • Rugged low profile molded case 6 pins, 8 pins, and 10 pins available • Compatible with automatic insertion equipment • Compliant to RoHS Directive 2002/95/EC Note * Pb containing terminations are not RoHS compliant, exemptions may apply Designed to meet MIL-PRF-83401 characteristic “V” and “H” Military grade networks designed to meet MIL-PRF-83401 characteristics “V” and “H” available in 6 pins, 8 pins and 10 pins sizes in high and low profile. The molded style features a direct thermal compression bonded lead attachment in a rugged molded construction. TYPICAL PERFORMANCE TCR TOL. ABSOLUTE TRACKING 10 2 ABSOLUTE RATIO 0.05 0.025 SCHEMATIC Custom schematics available. Please consult factory. STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS Material Pin/Lead Number CONDITIONS Passivated nichrome - 6, 8, 10 - 20 to 500 k total - TCR: Absolute ± 10 ppm/°C to ± 25 ppm/°C - 55 °C to + 125 °C TCR: Tracking ± 2 ppm/°C (typical less 1 ppm/°C equal values) - 55 °C to + 125 °C Resistance Range Tolerance: Absolute ± 0.05 % to ± 0.5 % + 25 °C Tolerance: Ratio ± 0.025 % to 0.1 % + 25 °C 100 mW (per element typical at + 25 °C) Maximum at + 70 °C Power Rating: Resistor Power Rating: Package 500 mW Maximum at + 70 °C Stability: Absolute R ± 0.05 % 2000 h at + 70 °C Stability: Ratio R ± 0.015 % 2000 h at + 70 °C < 0.0015 ppm/V - 100 V - Operating Temperature Range - 55 °C to + 125 °C - Storage Temperature Range - 55 °C to + 150 °C - < - 30 dB - Voltage Coefficient Working Voltage Noise Thermal EMF < 0.08 μV/°C - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 °C Shelf Life Stability: Ratio R ± 0.002 % 1 year at + 25 °C Note • Tantalum Nitride film is custom, consult factory Revision: 01-Sep-11 1 Document Number: 60036 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CTSP www.vishay.com Vishay Dale Thin Film DIMENSIONS AND IMPRINTING in inches and millimeters Part Number L Indicates Pin 1 Date Code Vishay Logo DIMENSION INCHES MILLIMETERS A 0.035 0.89 B 0.040 1.02 C 0.100 ± 0.005 non-accum. 2.54 ± 0.13 D 0.019 ± 0.006 typical 0.48 ± 0.15 E 0.187 ± 0.010 4.75 ± 0.25 F 0.135 3.43 G 0.095 2.41 H 0.012 ± 0.004 0.31 ± 0.10 L (6 Pins) 0.583 ± 0.015 14.81 ± 0.38 L (8 Pins) 0.783 ± 0.015 19.89 ± 0.38 L (10 Pins) 0.983 ± 0.015 24.97 ± 0.38 G E A F B H C D MECHANICAL SPECIFICATIONS Resistive Element Passivated nichrome or tantalum nitride Substrate Material Alumina Body Molded Epoxy Terminals Copper alloy Plating Nickel/gold Model TSP - Lead (Pb)-free Standard Gold plated Model TSPS - Lead (Pb)-free Solder Coated Option Sn63 Model TSPL - Tin/Lead Solder Coated Option Sn96.5, Ag3.0, Cu0.5 Tin/Lead and Lead (Pb)-free Finish Hot solder dip ORDERING INFORMATION CHECK LIST (Customs) Special requirements should be identified in advance, but as a minimum, you should have the following information ready. ELECTRICAL MECHANICAL 1. Maximum allowable seated height (from PC board to top of network) 2. Special marking concerns 3. Schematic pin out of package 4. Specify if solder coated terminals are required 1. Resistors, by value and tolerance 2. Reference resistor(s) and matching of which resistors to which reference resistors 3. Resistance by ratio 4. Absolute temperature coefficient of resistivity 5. Temperature tracking of subordinate resistors to reference resistor(s) 6. Maximum operating voltage 7. Resistor power ratings 8. Operating temperature range For additional assistance refer to Vishay Thin Film’s guide to understanding Thin Film precision. Resistor networks or application engineering. All standard products may be ordered directly from Vishay Thin Film. Revision: 01-Sep-11 2 Document Number: 60036 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CTSP www.vishay.com Vishay Dale Thin Film GLOBAL PART NUMBER INFORMATION New Global Part Numbering: TSP1xx-xxxUF T S P 1 x x - x x x U F T S P L 1 x x - x x x U F T S P S x x - x x x - U F GLOBAL MODEL (3 or 4 digits) TSP (Lead (Pb)-free) (e4) 1 CUSTOM PART NUMBER (7 to 12 digits) 1xx-xxx 1xx-xxx-xxxx x PACKAGING UF = TUBED TSPL (Tin Lead) TSPS (Lead (Pb)-free) (e1) Historical Part Number example: 1xx-xxx (for reference purposes only) 1xx-xxx CUSTOM PART NUMBER Revision: 01-Sep-11 3 Document Number: 60036 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000