Vision sensors XF-100 VS XF100M03I16EP Article number: 11112924 features User management Password protection Backup & Restore function Coordinate transformation flexible result conjunction mechanical data resolution 752 × 480 px width 53 mm sensor type 1/3” CMOS, monochrome height 99,5 mm LED class free group (risk free, EN 62471:2008) depth 38 mm material housing: aluminum cover glass: PMMA, integrated daylight filter (780 nm) weight ≤ 250 g high-resolution mode max. 50 inspections per second high-speed mode (limited resolution) max. 100 inspections per second object distance min. 70 mm number of jobs (products) ≤ 255 operating temperature +5 … +50 °C features per job 32 storage temperature -20 … +70 °C defect image memory 32 case temperature max. +50 °C signal processing Baumer FEX 4.0 humidity 0 … 90 % (non-condensing) illumination integrated, LED infrared (860 nm) protection class IP 67 lens 16 mm vibration load IEC 60068-2-6 IEC 60068-2-64 18 ... 30 V DC mechanical shock resistance EN 60068-2-27 environmental conditions ® electrical data voltage supply range +Vs power consumption typical 5 W (I = 1 A at 24 V) digital inputs 5 inputs (8 … 30 V) trigger job selection external teach-in encoders (CH-A, CH-B) 500 kHz digital outputs 5 outputs (PNP) Pass / Fail Flash Sync Alarm Camera Ready Output Enable max Ethernet (10BASE-T / 100BASE-TX) process interface TCP|UDP (Ethernet) visualization web interface part location part location on contours part location on edges part location on circle part location on text line geometry distance circle angle count edges point position edge characteristics feature comparison count contour points contour comparison brightness contrast area size count areas pattern comparison EN / 100516 initial setup feature checks The product characteristics and technical data provided do not express or imply any warranty. Technical modifications and errors reserved. general data www.baumer.com Data sheet VS XF100M03I16EP page 1 / 2 Vision sensors XF-100 VS XF100M03I16EP Article number: 11112924 electrical connection M12 / 12-pin (on device) 7 6 8 9 12 11 5 1 4 10 2 3 1: PWR (+18-30 V DC) 7: OUT3 2: Ground 8: IN3 3: IN1 (Trigger) 9: OUT4 4: OUT1 10: IN4 5: IN2 11: IN5 6: OUT2 12: OUT5 Ethernet connection M12 / 4-pin (on device) 3 4 2 1 1: TD+ 3: TD- 2: RD+ 4: RDThe product characteristics and technical data provided do not express or imply any warranty. Technical modifications and errors reserved. dimension drawing 112,9 99,5+0,6 40 53+0,6 EN / 100516 38 51 4x M4 /4 28,5 40 www.baumer.com Data sheet VS XF100M03I16EP page 2 / 2