Vision sensors XC-100 VS XC100C12X00RP Article number: 11128428 features Integrated flash controller User management Password protection Backup & Restore function Coordinate transformation flexible result conjunction general data resolution 1280 × 960 px sensor type 1/3” CCD, color external illumination as accessory high-resolution mode max. 12 inspections per second number of jobs (products) ≤ 255 features per job 32 defect image memory 8 signal processing Baumer FEX 5.0 width 53 mm (without lens/tube) illumination direct connection (integrated flash controller) height 99,5 mm (without lens/tube) depth 49,8 mm (without lens/tube) lens C-mount material housing: aluminum cover glass: PMMA 18 ... 30 V DC weight ≤ 300 g (without lens/tube) current flash time power consumption typical 5 W (I = 1,5 A at 24 V) 5 inputs (8 … 30 V) trigger job selection external teach-in encoders (CH-A, CH-B) 500 kHz max 3 outputs (PNP) Pass / Fail Flash Sync Alarm Camera Ready Output Enable environmental conditions operating temperature +5 … +50 °C storage temperature -20 … +70 °C case temperature max. +50 °C humidity 0 … 90 % (non-condensing) protection class IP 67 (with tube) vibration load IEC 60068-2-6 IEC 60068-2-64 mechanical shock resistance EN 60068-2-27 Ethernet (10BASE-T / 100BASE-TX) process interface TCP|UDP (Ethernet) / RS485 (supports VeriSens Gateways) part location part location on contours part location on edges part location on circle part location on text line geometry distance circle angle count edges point position edge characteristics ® web interface integrated flash controller voltage www.baumer.com 12 V DC or 24 V DC (permanent) 24 V DC or 48 V DC (pulsed) Data sheet VS XC100C12X00RP EN / 100516 feature checks initial setup visualization max. 1 ms (Duty Cycle max. 1:10) mechanical data ® digital inputs digital outputs max max electrical data voltage supply range +Vs I = 800 mA at 24 V DC (permanent) (±10 %, at least ± 100 mA, at 25 °C) I = 4 A at 48 V DC (pulsed) (+10/-20 %, at least ± 100 mA, at 25 °C) The product characteristics and technical data provided do not express or imply any warranty. Technical modifications and errors reserved. integrated flash controller page 1 / 2 Vision sensors XC-100 VS XC100C12X00RP Article number: 11128428 C-mount support feature checks count contour points contour comparison area size count areas pattern comparison color identification color positioning 17 37,2 2x M4 /4 20 feature comparison electrical connection M12 / 12-pin (on device) 8 7 36 44 6 9 12 11 5 1 4 10 2 3 OUT3 8: IN3 3: IN1 (Trigger) 9: RS485+ 4: OUT1 10: IN4 5: IN2 11: IN5 6: OUT2 12: RS485- XC Tube, XC Tube Module Ethernet connection M12 / 4-pin (on device) 3 4 2 1 1: TD+ 3: TD- 2: RD+ 4: RD- Ø 38,2 Ø 49,5 36 44 Ø 49,5 12 electrical connection illumination M8 / 4-pin (on device) 1 3 2 4 1: +24 V or +48 V Flash 3: Ground 2: +12 V or +24 V Flash 4: Flash Sync voltage outputs configurable by software dimension drawing 53 20 51 49,8 4x M4 /4 112,9 99,5 40 4x M4 /4 28,5 40 EN / 100516 40 The product characteristics and technical data provided do not express or imply any warranty. Technical modifications and errors reserved. 7: Ground M47 x 0,75 PWR (+18-30 V DC) 2: M47 x 0,75 1: www.baumer.com Data sheet VS XC100C12X00RP page 2 / 2