H Series Crystal ¾ 6.0mm x 3.5 mm x1.2mm Ceramic Package ¾ Tight Tolerance and Stability ¾ Wide Frequency Range ¾ Tape and Reel Packaging ESR CHART: ELECTRICAL SPECIFICATIONS: Frequency Range Frequency Tolerance / Stability Operating Temperature Range Storage Temperature Aging Shunt Capacitance 8.000MHZ to 100.000MHZ (See Part Number Guide for Options) (See Part Number Guide for Options) -40°C to +85°C ±5ppm per year max 7pF max 20pF Standard (See Part Number Guide for Options) See ESR Chart Fundamental / 3rd OT 100µW max 500 M ohms min at 100VDC ±15VDC MIL-STD-883, Meth 2002, Cond B MIL-STD-883, Meth 2003 MIL-STD-202, Meth 215 MIL-STD-883, Meth 2007, Cond A MIL-STD-883, Meth 1014, Cond C MIL-STD-883, Meth 1014, Cond A Load Capacitance Equivalent Series Resistance Mode of Operation Drive Level Insulation Resistance Shock Solderability Solvent Resistance Vibration Gross Leak Test Fine Leak Test Frequency Range 8.000MHZ to 10.999MHZ 11.000MHZ to 11.999MHZ 12.000MHZ to 15.999MHZ 16.000MHZ to 39.999MHZ 40.000MHZ to100.000MHZ ESR (Ohms) 100 max 80 max 60 max 40 max 70 max Mode / Cut Fund / AT Fund / AT Fund / AT Fund / AT 3rd OT/ AT MARKING: Line 1: MXX.XXX XX.XXX = Frequency in MHz Line 2: SYMCCL S = Internal Code YM = Date Code (Year/Month) CC = Crystal Parameters Code L = Denotes RoHS Compliant MECHANICALS DETAIL: 6.20 [.244] MAX MARKING 1.20 [.047] MAX 2.40 [.094] 3.00 [.118] 3.70 [.146] MAX 3 4 2 1 1.50 [.059] 1.10 [.043] 1.40 [.055] Dimension in Brackets are in Inches PIN CONNECTIONS PIN 1 CRYSTAL PIN 2 CASE GROUND PIN 3 CRYSTAL PIN 4 CASE GROUND 2.00 [.079] Recommended Land Pattern PART NUMBER GUIDE: Frequency H 6mm X 3.5mm x 1.2mm 4 Pads Load Capacitance S = Series 20 = 20pF (Standard) XX = XXpF (8pF to 50pF) Temperature Tolerance/Stability* A = ±50 ppm / ±100 ppm B = ±30 ppm / ±50 ppm C = ±15 ppm / ±30 ppm D = ±10 ppm / ±15 ppm E = ±50 ppm / ±50 ppm N = ±10 ppm / ±10 ppm Mode of Operation 1 = Fundamental 3 = 3rd Overtone Operating Temperature A = 0°C to +70°C B = -20°C to +70°C C = -40°C to +85°C ** Value Added Options Blank = No Added Options T = Tape and Reel * Please consult with MMD sales department for any other parameters or options. ** Not all Frequency Tolerance/Stability options available at this temperature range. MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Specifications subject to change without notice Revision H070808G