V Series Crystal 5.0mm x 3.2mm x 1.2mm 2 Pads Ceramic Package RoHS Compliant Rugged AT-cut Crystal Construction Tape and Reel Packaging Available Frequency Range 12.000MHz to 50.000MHz Frequency Tolerance / Stability (See Part Number Guide for Options) Operating Temperature (See Part Number Guide for Options) Storage Temperature -40°C to +85°C Aging ±5 ppm per year Shunt Capacitance 5 pF Load Capacitance (See Part Number Guide for Options) Oscillation Mode Fundamental Drive Level 10μW typ / 300 max Insulation Resistance 500 M Ohms / 100 VDC Environmental & Mechanical Detail Shock MIL-STD-883, Method 2002 Cond B Solderability MIL-STD-883, Method 2003 Solvent Resistance MIL-STD-202, Method 215 Vibration MIL-STD-883, Method 2007, Cond A Gross Leak Test MIL-STD-883, Method 1014, Cond C Fine Leak Test MIL-STD-883, Method 1014, Cond A2 MSL Level 1 per IPC/JEDEC J-STD 20 Marking Detail Line 1: MXX.XXX XX.XXX = Frequency in MHz Line 2: SYMCCL S = Internal Code YM = Date Code (Year/Month) CC = Crystal Parameters Code L = Denotes RoHS Compliant MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Specifications are subject to change without notice. V091310 D Pg 1 of 2 ESR Chart Frequency Range ESR (Ohms) Mode / Cut 12.000MHZ to 30.000MHZ 60 Max Fund / AT 30.001MHZ to 40.000MHZ 50 Max Fund / AT 40.001MHZ to 50.000MHZ 40 Max Fund / AT Part Number Guide Frequency V 5mm X 3.2mm x 1.2mm 2 Pads Load Capacitance S = Series 20 = 20pF (Standard) XX = XXpF (8pF to 50pF) Temperature Tolerance/Stability* A = ±50 ppm / ±100 ppm B = ±30 ppm / ±50 ppm C = ±15 ppm / ±30 ppm D = ±10 ppm / ±15 ppm E = ±50 ppm / ±50 ppm N = ±10 ppm / ±10 ppm Mode of Operation 1 = Fundamental Operating Temperature A = 0°C to +70°C B = -20°C to +70°C C = -40°C to +85°C ** Value Added Options Blank = No Added Options T = Tape and Reel * Please consult with MMD sales department for any other parameters or options. ** Not all Frequency Tolerance/Stability options available at this temperature range. Mechanical Details 5.20 [.205] MAX MXX.XXX SYMCCL 1.40 [.055] MAX 3.40 [.134] MAX 1.30 [.051] 2.00 [.079] 1.70 [.067] 1.70 [.067] 2.40 [.094] 2.00 [.079] 2.40 [.094] DIMENSION IN BRACKETS ARE IN INCHES SUGGESTED LAND PATTERN MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Specifications are subject to change without notice. V091310 D Pg 2 of 2