Reference Document Download

DC/DC Converter
Application Information
IC Product Name
BD9329AEFJ-LB
Topology
Buck (Step-Down)
Switching Regulator
Type
Non-Isolation
Input
Output
1
4.2V to 18V
1.0V, 2.0A
2
4.2V to 18V
1.2V, 2.0A
3
4.2V to 18V
1.5V, 2.0A
4
4.2V to 18V
1.8V, 2.0A
5
4.8V to 18V
3.3V, 2.0A
6
7.2V to 18V
5.0V, 2.0A
7
12.9V to 18V
9.0V, 2.0A
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
1/6
15.May.2015 Rev.001
Application Note
BD9329AEFJ-LB
■ Typical Application Circuit
C6
FB 5
COMP 6
EN 7
SS 8
R1
3 SW
2 VIN
4 GND
EPAD 9
1 BST
U1
BD9329AEFJ- LB
R2
R3
C5
C1
VIN
C4
L1
VOUT
C2
C3
■ EN terminal setting (7-pin)
Terminal state
IC operation
≥ 1.4V
Normal operation
≤ 1.0V
Power down
■ Output voltage setting
0.9
Input/output voltage conditions are required to satisfy the following equations:
0.9 ~
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
0.7
2/6
15.May.2015 Rev.001
Application Note
BD9329AEFJ-LB
■ Bill of Materials
1. VO=1.0V (VIN =4.2V to 18V)
Count
Reference
Designator
Type
Value
Description
1
C1
Ceramic Capacitor
10µF
35V, B, ±10%
1
C2
Ceramic Capacitor
22µF
4V, B, ±20%
0
C3
Ceramic Capacitor
n/a
2
C4, C5
Ceramic Capacitor
1
C6
Ceramic Capacitor
1
L1
Inductor
0.1µF
-
Manufacturer
Configuration
(mm)
GRM32EB3YA106KA12
MURATA
3225
GRM219B30G226ME66
MURATA
2012
-
-
Manufacturer
Part Number
-
16V, B, ±10%
GRM188B11C104KA01
MURATA
1608
0.022μF 16V, B, ±10%
GRM155B11C223KA01
MURATA
1005
±20%, DCR=29.82mΩmax, 7.6A
XAL6060-103ME
Coilcraft
6466
±20%, DCR=87.26mΩmax, 4.4A
CDMC50D38T150NP-100MC
Sumida
5450
10µH
±20%, DCR=24mΩmax, 4.49A
NS10155T100MNV
TAIYO YUDEN
101101
±20%, DCR=25.2mΩmax, 6.7A
CLF12555T-100M
TDK
125121
±20%, DCR=74mΩmax, 5.4A
FDSD0630-H-100M
TOKO
7066
±20%, DCR=71.2mΩmax, 3.5A
IHLP2525CZER100M11
VISHAY
6965
WÜRTH
100100
ROHM
1005
±20%, DCR=27mΩmax, 5.0A
7447714100 (WE-PD 1050)
1
R1
Resistor
3kΩ
0.063W, 50V, 1%
MCR01MZPF3001
1
R2
Resistor
27kΩ
0.063W, 50V, 1%
MCR01MZPF2702
ROHM
1005
1
R3
Resistor
1kΩ
0.063W, 50V, 5%
MCR01MZPJ102
ROHM
1005
1
U1
IC
-
Buck DC/DC Converter
BD9329AEFJ-LB
ROHM
HTSOP-J8
Manufacturer
Configuration
(mm)
GRM32EB3YA106KA12
MURATA
3225
GRM219B30G226ME66
MURATA
2012
-
-
2. VO=1.2V (VIN =4.2V to 18V)
Count
Reference
Designator
Type
Value
Description
1
C1
Ceramic Capacitor
10µF
35V, B, ±10%
1
C2
Ceramic Capacitor
22µF
4V, B, ±20%
0
C3
Ceramic Capacitor
n/a
2
C4, C5
Ceramic Capacitor
1
C6
Ceramic Capacitor
1
1
L1
R1
Inductor
Resistor
0.1µF
-
Manufacturer
Part Number
-
16V, B, ±10%
GRM188B11C104KA01
MURATA
1608
0.022μF 16V, B, ±10%
GRM155B11C223KA01
MURATA
1005
±20%, DCR=29.82mΩmax, 7.6A
XAL6060-103ME
Coilcraft
6466
±20%, DCR=87.26mΩmax, 4.4A
CDMC50D38T150NP-100MC
Sumida
5450
10µH
±20%, DCR=24mΩmax, 4.49A
NS10155T100MNV
TAIYO YUDEN
101101
±20%, DCR=25.2mΩmax, 6.7A
CLF12555T-100M
TDK
125121
±20%, DCR=74mΩmax, 5.4A
FDSD0630-H-100M
TOKO
7066
±20%, DCR=71.2mΩmax, 3.5A
IHLP2525CZER100M11
VISHAY
6965
WÜRTH
100100
ROHM
1005
±20%, DCR=27mΩmax, 5.0A
7447714100 (WE-PD 1050)
10kΩ
0.063W, 50V, 1%
MCR01MZPF1002
1
R2
Resistor
30kΩ
0.063W, 50V, 1%
MCR01MZPF3002
ROHM
1005
1
R3
Resistor
1.2kΩ
0.063W, 50V, 5%
MCR01MZPJ122
ROHM
1005
1
U1
IC
-
Buck DC/DC Converter
BD9329AEFJ-LB
ROHM
HTSOP-J8
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
3/6
15.May.2015 Rev.001
Application Note
BD9329AEFJ-LB
■ Bill of Materials (continued)
3. VO=1.5V (VIN =4.2V to 18V)
Count
Reference
Designator
Type
Value
Description
1
C1
Ceramic Capacitor
10µF
35V, B, ±10%
1
C2
Ceramic Capacitor
22µF
6.3V, B, ±20%
0
C3
Ceramic Capacitor
n/a
2
C4, C5
Ceramic Capacitor
1
C6
Ceramic Capacitor
1
L1
Inductor
0.1µF
-
Manufacturer
Configuration
(mm)
GRM32EB3YA106KA12
MURATA
3225
GRM319B30J226ME15
MURATA
3216
-
-
Manufacturer
Part Number
-
16V, B, ±10%
GRM188B11C104KA01
MURATA
1608
0.01μF 16V, B, ±10%
GRM155B11C103KA01
MURATA
1005
±20%, DCR=29.82mΩmax, 7.6A
XAL6060-103ME
Coilcraft
6466
±20%, DCR=87.26mΩmax, 4.4A
CDMC50D38T150NP-100MC
Sumida
5450
10µH
±20%, DCR=24mΩmax, 4.49A
NS10155T100MNV
TAIYO YUDEN
101101
±20%, DCR=25.2mΩmax, 6.7A
CLF12555T-100M
TDK
125121
±20%, DCR=74mΩmax, 5.4A
FDSD0630-H-100M
TOKO
7066
±20%, DCR=71.2mΩmax, 3.5A
IHLP2525CZER100M11
VISHAY
6965
±20%, DCR=27mΩmax, 5.0A
7447714100 (WE-PD 1050)
WÜRTH
100100
10kΩ
0.063W, 50V, 1%
MCR01MZPF1002
ROHM
1005
Resistor
15kΩ
0.063W, 50V, 1%
MCR01MZPF1502
ROHM
1005
Resistor
2.2kΩ
0.063W, 50V, 5%
MCR01MZPJ222
ROHM
1005
Buck DC/DC Converter
BD9329AEFJ-LB
ROHM
HTSOP-J8
Manufacturer
Configuration
(mm)
1
R1
Resistor
1
R2
1
R3
1
U1
IC
-
4. VO=1.8V (VIN =4.2V to 18V)
Count
Reference
Designator
Type
Value
Description
Manufacturer
Part Number
1
C1
Ceramic Capacitor
10µF
35V, B, ±10%
GRM32EB3YA106KA12
MURATA
3225
1
C2
Ceramic Capacitor
22µF
6.3V, B, ±20%
GRM319B30J226ME15
MURATA
3216
0
C3
Ceramic Capacitor
n/a
2
C4, C5
Ceramic Capacitor
0.1µF
1
C6
Ceramic Capacitor
1
L1
Inductor
-
-
16V, B, ±10%
GRM188B11C104KA01
MURATA
1608
6800pF 16V, B, ±10%
10µH
-
-
GRM15XB11C682KA86
MURATA
1005
±20%, DCR=29.82mΩmax, 7.6A
XAL6060-103ME
Coilcraft
6466
±20%, DCR=87.26mΩmax, 4.4A
CDMC50D38T150NP-100MC
±20%, DCR=24mΩmax, 4.49A
NS10155T100MNV
±20%, DCR=25.2mΩmax, 6.7A
CLF12555T-100M
±20%, DCR=74mΩmax, 5.4A
FDSD0630-H-100M
Sumida
5450
TAIYO YUDEN
101101
TDK
125121
TOKO
7066
±20%, DCR=71.2mΩmax, 3.5A
IHLP2525CZER100M11
VISHAY
6965
±20%, DCR=27mΩmax, 5.0A
7447714100 (WE-PD 1050)
WÜRTH
100100
1005
2
R1, R2
Resistor
10kΩ
0.063W, 50V, 1%
MCR01MZPF1002
ROHM
1
R3
Resistor
3.9kΩ
0.063W, 50V, 5%
MCR01MZPJ392
ROHM
1005
1
U1
IC
-
Buck DC/DC Converter
BD9329AEFJ-LB
ROHM
HTSOP-J8
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
4/6
15.May.2015 Rev.001
Application Note
BD9329AEFJ-LB
■ Bill of Materials (continued)
5. VO=3.3V (VIN =4.8V to 18V)
Count
Reference
Designator
Type
Value
Description
Manufacturer
Part Number
Manufacturer
Configuration
(mm)
1
C1
Ceramic Capacitor
10µF
35V, B, ±10%
GRM32EB3YA106KA12
MURATA
3225
1
C2
Ceramic Capacitor
22µF
16V, B, ±20%
GRM32EB31C226ME16
MURATA
3225
0
C3
Ceramic Capacitor
n/a
2
C4, C5
Ceramic Capacitor
0.1µF
1
C6
Ceramic Capacitor
1
L1
Inductor
-
-
16V, B, ±10%
GRM188B11C104KA01
MURATA
1608
3300pF 16V, B, ±10%
10µH
-
-
GRM15XB11C332KA86
MURATA
1005
±20%, DCR=29.82mΩmax, 7.6A
XAL6060-103ME
Coilcraft
6466
±20%, DCR=87.26mΩmax, 4.4A
CDMC50D38T150NP-100MC
±20%, DCR=24mΩmax, 4.49A
NS10155T100MNV
±20%, DCR=25.2mΩmax, 6.7A
CLF12555T-100M
±20%, DCR=74mΩmax, 5.4A
FDSD0630-H-100M
Sumida
5450
TAIYO YUDEN
101101
TDK
125121
TOKO
7066
±20%, DCR=71.2mΩmax, 3.5A
IHLP2525CZER100M11
VISHAY
6965
±20%, DCR=27mΩmax, 5.0A
7447714100 (WE-PD 1050)
WÜRTH
100100
1
R1
Resistor
20kΩ
0.063W, 50V, 1%
MCR01MZPF2002
ROHM
1005
1
R2
Resistor
7.5kΩ
0.063W, 50V, 1%
MCR01MZPF7501
ROHM
1005
1
R3
Resistor
7.5kΩ
1
U1
IC
-
0.063W, 50V, 5%
MCR01MZPJ752
ROHM
1005
Buck DC/DC Converter
BD9329AEFJ-LB
ROHM
HTSOP-J8
Manufacturer
Configuration
(mm)
GRM32EB3YA106KA12
MURATA
3225
GRM32EB31C226ME16
MURATA
3225
-
-
6. VO=5.0V (VIN =7.2V to 18V)
Count
Reference
Designator
Type
Value
Description
1
C1
Ceramic Capacitor
10µF
35V, B, ±10%
1
C2
Ceramic Capacitor
22µF
16V, B, ±20%
0
C3
Ceramic Capacitor
n/a
2
C4, C5
Ceramic Capacitor
1
C6
Ceramic Capacitor
1
L1
Inductor
0.1µF
-
Manufacturer
Part Number
-
16V, B, ±10%
GRM188B11C104KA01
MURATA
1608
2200pF 25V, B, ±10%
GRM155B11E222KA01
MURATA
1005
±20%, DCR=29.82mΩmax, 7.6A
XAL6060-103ME
Coilcraft
6466
±20%, DCR=87.26mΩmax, 4.4A
CDMC50D38T150NP-100MC
Sumida
5450
10µH
±20%, DCR=24mΩmax, 4.49A
NS10155T100MNV
TAIYO YUDEN
101101
±20%, DCR=25.2mΩmax, 6.7A
CLF12555T-100M
TDK
125121
±20%, DCR=74mΩmax, 5.4A
FDSD0630-H-100M
TOKO
7066
±20%, DCR=71.2mΩmax, 3.5A
IHLP2525CZER100M11
VISHAY
6965
±20%, DCR=27mΩmax, 5.0A
7447714100 (WE-PD 1050)
WÜRTH
100100
1
R1
Resistor
8.2kΩ
0.063W, 50V, 1%
MCR01MZPF8201
ROHM
1005
1
R2
Resistor
1.8kΩ
0.063W, 50V, 1%
MCR01MZPF1800
ROHM
1005
1
R3
Resistor
11kΩ
0.063W, 50V, 5%
MCR01MZPJ113
ROHM
1005
1
U1
IC
-
Buck DC/DC Converter
BD9329AEFJ-LB
ROHM
HTSOP-J8
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
5/6
15.May.2015 Rev.001
Application Note
BD9329AEFJ-LB
■ Bill of Materials (continued)
7. VO=9.0V (VIN =12.9V to 18V)
Count
Reference
Designator
Manufacturer
Configuration
(mm)
MURATA
3225
Value
C1, C2, C3
Ceramic Capacitor
10µF
35V, B, ±10%
2
C4, C5
Ceramic Capacitor
0.1µF
16V, B, ±10%
GRM188B11C104KA01
MURATA
1608
1
C6
Ceramic Capacitor
2200pF 25V, B, ±10%
GRM155B11E222KA01
MURATA
1005
±20%, DCR=29.82mΩmax, 7.6A
XAL6060-103ME
Coilcraft
6466
±20%, DCR=87.26mΩmax, 4.4A
CDMC50D38T150NP-100MC
Sumida
5450
±20%, DCR=24mΩmax, 4.49A
NS10155T100MNV
TAIYO YUDEN
101101
±20%, DCR=25.2mΩmax, 6.7A
CLF12555T-100M
TDK
125121
3
1
L1
Inductor
10µH
Description
Manufacturer
Part Number
Type
GRM32EB3YA106KA12
±20%, DCR=74mΩmax, 5.4A
FDSD0630-H-100M
TOKO
7066
±20%, DCR=71.2mΩmax, 3.5A
IHLP2525CZER100M11
VISHAY
6965
WÜRTH
100100
ROHM
1005
±20%, DCR=27mΩmax, 5.0A
7447714100 (WE-PD 1050)
27kΩ
0.063W, 50V, 1%
MCR01MZPF2702
Resistor
3kΩ
0.063W, 50V, 1%
MCR01MZPF3000
ROHM
1005
Resistor
11kΩ
0.063W, 50V, 5%
MCR01MZPJ113
ROHM
1005
IC
-
Buck DC/DC Converter
BD9329AEFJ-LB
ROHM
HTSOP-J8
1
R1
Resistor
1
R2
1
R3
1
U1
■ Precautions for use
(1) This document provides the BOM for evaluation boards. Small parts can also be selected for resistor, capacitor, and coil.
(2) When miniaturizing a resistor, consider decrease in rated power and withstand voltage.
(3) When miniaturizing a ceramic capacitor, consider decrease in withstand voltage. In addition, the capacity may be
decreased by DC bias characteristics, and the desired characteristics may not be obtained.
(4) If ceramic capacitor models differ even when they have the same capacity and withstand voltage, the capacity may be
decreased by DC bias characteristics depending on the model, and desired characteristics may not be obtained. Be sure to
check the DC bias characteristics.
(5) When miniaturizing a coil, consider increase in direct current resistance and decrease in rated current. An increase in DC
resistance can cause a deterioration of power conversion efficiency. A decrease in rated current can saturate the coil when
outputting a large current, which may deteriorate efficiency or make it impossible to obtain the desired output current.
(6) If there is a possibility that the output will short-circuit, use a coil with a rated current that is larger than the maximum IC
output current. For example, even when up to 100 mA is actually used for an IC that can output 1 A, select a coil whose
rated current is larger than 1 A. If a coil with a small rated current is used, it will be saturated by a large current in the event
of output short-circuiting, resulting in a steep increase in output voltage. The IC may be broken down because the
processing speed of the overcurrent protecting function of the IC cannot keep up with the increase in voltage.
(7) This circuit constant is the value for our evaluation board. It may be necessary to adjust the constant for the actual board.
Carry out suitable evaluations.
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
6/6
15.May.2015 Rev.001
Notice
Notes
1) The information contained herein is subject to change without notice.
2) Before you use our Products, please contact our sales representative and verify the latest specifications :
3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors.
Therefore, in order to prevent personal injury or fire arising from failure, please take safety
measures such as complying with the derating characteristics, implementing redundant and
fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no
responsibility for any damages arising out of the use of our Poducts beyond the rating specified by
ROHM.
4) Examples of application circuits, circuit constants and any other information contained herein are
provided only to illustrate the standard usage and operations of the Products. The peripheral
conditions must be taken into account when designing circuits for mass production.
5) The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly,
any license to use or exercise intellectual property or other rights held by ROHM or any other
parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of
such technical information.
6) The Products specified in this document are not designed to be radiation tolerant.
7) For use of our Products in applications requiring a high degree of reliability (as exemplified
below), please contact and consult with a ROHM representative : transportation equipment (i.e.
cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety
equipment, medical systems, servers, solar cells, and power transmission systems.
8) Do not use our Products in applications requiring extremely high reliability, such as aerospace
equipment, nuclear power control systems, and submarine repeaters.
9) ROHM shall have no responsibility for any damages or injury arising from non-compliance with
the recommended usage conditions and specifications contained herein.
10) ROHM has used reasonable care to ensur the accuracy of the information contained in this
document. However, ROHM does not warrants that such information is error-free, and ROHM
shall have no responsibility for any damages arising from any inaccuracy or misprint of such
information.
11) Please use the Products in accordance with any applicable environmental laws and regulations,
such as the RoHS Directive. For more details, including RoHS compatibility, please contact a
ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting
non-compliance with any applicable laws or regulations.
12) When providing our Products and technologies contained in this document to other countries,
you must abide by the procedures and provisions stipulated in all applicable export laws and
regulations, including without limitation the US Export Administration Regulations and the Foreign
Exchange and Foreign Trade Act.
13) This document, in part or in whole, may not be reprinted or reproduced without prior consent of
ROHM.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
R1102B