MIL-C-26482 Series 2/-83723 Series 1 Filter Connectors TPV These miniature circular filter connectors are designed to combine the functions of a standard electrical connector and a feed-thru filter into one compact package. TPV filter connectors are designed to meet the applicable portions of military specifications MILC-26482 and MIL-C-83723. They are also intermateable with the NAS1599 and the NASA 40M39569 type connectors. These connectors feature three-point bayonet lock coupling, five keyway polarization, and have contact arrangements that will accommodate up to 61 contacts in shell sizes, with both pin and socket contact versions available. Performance and Material Specification MATERIALS AND FINISHES Jam Nut Material: Finish: Coupling Pins Contacts Insulator Interfacial and Peripheral Seals O ring (Jam Nut Mounting Only) Ground Spring Material: Finish: Material: Finish: Material: Finish: Material: Finish: Material: Finish: Material: Finish: Aluminum Alloy Class "B" Series Olive drab chromeplate over cadimium finish per QQ-P-416 Class "G" Series Electroless nickel plating Per MIl-C-26074 Copper Alloy Passivated Copper Alloy Gold plated per MIL-G-45204, Type 1 Class 1 with nickel underplate per QQ-N-290 Suitable high termperature plastic/epoxy none Fluorosilicone rubber (ITT Cannon blend) none Silicone rubber (ITT Cannon blend) none Beryllium Copper Gold Plated ELECTRICAL (Size #16 and #20 Contacts) Filter Description Catalog Indicator Voltage Rating Current Rating (amp DC) Insulation Resistance, 2 min. electrification time max. at 25˚C DWV, sea level, with 500 microamps max. charge/discharge Capacitance at 1 KHz 0.1V rms Picofarads Attenuation per MIL-STD-220 @ 25˚C with no applied voltage or current. Low Freq. L 500 VDC size 16 & 20 Freq. MHz 0.1 1.0 2 10 100 500 to 1000 High Freq. H 5000, megohms min. @ 100 VDC 500 VDC 32000 45000 8000 12000 3300 5000 850 1300 2 min. 10 min. 16 min. 40 min. 60 min. 60 min. Pi 2 min. 7 min. 18 min. 55 min. 60 min. Pi 2 min. 8 min. 45 min. 55 min. Pi 2 min. 30 min. 50 min. Pi Filter Filter Type/Construction Consult factory for higher or mixed attenuation values and higher voltage ratings. Std. Freq Mid Freq. T M 200 VDC - 120 VAC rms 400 Hz 15 amp, size 16/7.5 amp, size 20 F Dimensions shown in inches (mm) Specifications and dimensions subject to change F-12 www.ittcannon.com MIL-C-26482 Series 2/-83723 Series 1 Filter Connectors TPV How to Order T PV O C 24 B 61 T P N * FILTER SERIES PREFIX SHELL STYLE TERMINATION SHELL SIZE FINISH CONTACT ARRANGEMENT CAPACITANCE INDICATOR CONTACT TYPE INSERT POSITION MODIFICATION CODES FILTER SERIES PREFIX TPV - MIL-C-26482 Series 2, MIL-C-83723 Series 1 type filter connectors, solder termination. ITT Cannon designation. SHELL STYLE 0 - Flange mounting receptacle 7 - Jam nut mounting receptacle TERMINATION C - Solder Pot Termination E - P.C. Tail S - Crimp Piggyback W - Wire Wraps CONTACT ARRANGEMENTS See page 14 CAPACITANCE INDICATOR M - Mid-range frequency L - Low frequency T - Standard frequency H - High frequency SHELL SIZE 10, 12, 14, 16, 18, 20, 22, 24 FINISH A - Bright cadmium over nickel plate B - Olive drab chromate over cadmium finish G - Electorless nickel finish (preferred) CONTACT TYPE P - Pin contacts S - Socket contacts INSERT POSITION N - (Normal); Alternates - W, X, Y, Z See page 16. NOTES: 1) Backshell threads and teeh - none provided. 2) Hermetic versions of the filter connectors can be provided. Contact Customer Service Med. Freq. MODIFICATION CODES For backshell assembly contact Customer Service. Low Freq. 90 80 70 60 50 40 30 10 0 1.0 10 100 Std. Freq. 1000 F Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com Std. Freq. Filter 20 F-13 MIL-C-26482 Series 2/-83723 Series 1 Filter Connectors TPV Contact Arrangements (Face view, pin insert) F A B E D C 10-6 6 #20 Shell Size/Arr. No. No. of Contacts Contacts Size Shell Size/Arr. No. No. of Contacts Contacts Size Shell Size/Arr. No. No. of Contacts Contacts Size L A K M NB J T U PC R D H S E G F M A L N PB K V RC U D S T J H GF E 14-18 18 #20 14-19 19 #20 G A B F H E D C H A B G K J C F E D 12-8 8 #20 12-10 10 #20 G F A D A B W C X V Y D j k U Z E i s m T a F S h r t n b G q p c H R gf d e P N M L K J 20-39 2 37 #16 #20 20-41 41 #20 C C N W L K A E P R X V H C S T U J B G F D E A L K J 14-15 1 14 #16 #20 R P N C D A T S e U BC V f W d j g X D h Y E c b F M a Z L K J HG 18-8 8 #12 18-32 32 #20 U A V T B n W X C S m p k AA Y D q BB R z GG C C r Z j HH s a E P i y FF EE DD x F N t h w vu c b g d M f G L K e J H Z a bA Y B X u v c W t GG HH w d s V FF NN J J x r U EE MM P P K K y q DD L L T z CC AA S p BB i R n k j K P m N M L C D e f E g F G hH J 24-61 61 #20 22-55 55 #20 22-21 21 #16 A M B R N C P D H E G F L B K C B H F 16-26 26 #20 M J E D A G R A B S T U C N a b D MZ c V L Y X W E F K J HG D H 14-21 4B #16 #20 P 16-8 8 #16 A W V X BC Y U i j Z k T m a D h r E S g b F q n R c G p f P e d H N M L K J G M F B 14-5 5 #16 B H E A E Consult factory for availability of other contact arrangements. Available for In-Line Adapters also. Contact – Pin and Socket Standard Contact Terminations Finish: Gold plate per MIL-G-45204, Type 1, Class 1, over nickel plate per QQ-N-290. A C DIA. B DIA. .186 (4.72) MAX. Pin/Solder Pot DIA. .020 (.51) X.250 (6.35) EXT. BEYOND SHELL REAR B C DIA. DIA. Socket/Solder Pot Filter Pin/Printed Circuit .025 (.64) SQ. X .500 (12.70) EXT. BEYOND SHELL REAR Pin/Square Post Contact Size A .125 (3.18) #20 .110 (2.79) .160 (4.06) #16 .150 (3.81) Note: Solder pot extension typically will be .200 (5.08) max. beyond shell rear. F B Dia. .049 (1.24) .045 (1.14) .077 (1.96) .068 (1.73) C Dia. .073 (1.85) .068 (1.73) .104 (2.64) .097 (2.46) Dimensions shown in inches (mm) Specifications and dimensions subject to change F-14 www.ittcannon.com MIL-C-26482 Series 2/-83723 Series 1 Filter Connectors TPV Flange Mounted Receptacle TPV0 4 HOLES 0.005 .120 DIA. POLARIZING GROOVE B .147 DIA. (SIZE 24 ONLY) G (TP) F DIA. K (TP) Shell Size 10 12 14 16 18 20 22 24 L M B Max. F Max. L Max. M Max. J Max. .462 (11.73) .462 (11.73) .462 (11.73) .462 (11.73) .462 (11.73) .587 (14.91) .587 (14.91) .620 (15.75) .591 (15.01) .751 (19.08) .876 (22.25) 1.001 (25.43) 1.126 (28.60) 1.251 (31.78) 1.376 (34.95) 1.501 (38.13) 1.215 (30.86) 1.215 (30.86) 1.215 (30.86) 1.215 (30.86) 1.215 (30.86) 1.275 (32.39) 1.275 (32.39) 1.275 (32.39) 1.530 (38.86) 1.530 (38.86) 1.530 (38.86) 1.530 (38.86) 1.530 (38.86) 1.590 (40.38) 1.590 (40.38) 1.590 (40.38) .078 (1.98) .078 (1.98) .078 (1.98) .078 (1.98) .078 (1.98) .110 (2.79) .110 (2.79) .110 (2.79) J G Max. K .719 (18.26) .812 (20.62) .906 (23.01) .969 (24.61) 1.062 (26.97) 1.156 (29.36) 1.250 (31.75) 1.375 (34.93) .954 (24.23) 1.047 (26.59) 1.141 (28.98) 1.234 (31.34) 1.328 (33.73) 1.453 (36.91) 1.578 (40.08) 1.703 (43.26) Jam Nut Receptacle TPV7 POLARIZING GROOVE C N THD. W F DIA. V G A Shell Size 10 12 14 16 18 20 22 24 L M B V Max. A Max. B Max. F Max. G +_ .009 (0.23) C Panel Thickness L Max. M Max. W Dia. N Thread Class 2A 1.078 (27.38) 1.266 (32.16) 1.391 (35.33) 1.516 (38.51) 1.641 (41.68) 1.828 (46.43) 1.954 (49.63) 2.078 (52.78) .892 (22.66) 1.079 (27.41) 1.205 (30.61) 1.329 (33.76) 1.455 (36.96) 1.579 (40.11) 1.705 (43.31) 1.829 (46.46) .113 (2.87) .113 (2.87) .113 (2.87) .113 (2.87) .113 (2.87) .148 (3.76) .148 (3.76) .148 (3.76) .591 (15.01) .751 (19.08) .876 (22.25) 1.001 (25.43) 1.126 (28.60) 1.251 (31.78) 1.376 (34.95) 1.501 (38.13) .698 (17.73) .698 (17.73) .698 (17.73) .698 (17.73) .698 (17.73) .763 (19.38) .763 (19.38) .763 (19.38) .187 (4.75) .187 (4.75) .187 (4.75) .187 (4.75) .187 (4.75) .250 (6.35) .250 (6.35) .219 (5.56) 1.215 (30.86) 1.215 (30.86) 1.215 (30.86) 1.215 (30.86) 1.215 (30.86) 1.275 (32.39) 1.275 (32.39) 1.275 (32.39) 1.530 (38.86) 1.530 (38.86) 1.530 (38.86) 1.530 (38.86) 1.530 (38.86) 1.590 (40.39) 1.590 (40.39) 1.590 (40.39) 1.203 (30.56) 1.391 (35.33) 1.516 (38.51) 1.641 (41.68) 1.766 (44.86) 1.954 (49.63) 2.078 (52.78) 2.203 (55.96) 11/16-24UNEF 7/8-20 UNEF 1 -20UNEF 1-1/8-18UNEF 1-1/4-18UNEF 1-3/8-18UNEF 1-1/2-18UNEF 1-5/8-18UNEF Panel Mounting F DIA. E Shell Size 10 12 14 16 18 20 22 24 E +_.010 (0.25) .661 (16.79) .824 (20.93) .948 (24.08) 1.072 (27.23) 1.197 (30.40) 1.322 (33.58) 1.447 (36.75) 1.572 (39.93) F Dia. +_.005 (0.13) .697 (17.70) .895 (22.73) 1.010 (25.65) 1.135 (28.33) 1.260 (32.00) 1.385 (35.18) 1.510 (38.35) 1.635 (41.53) F Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com Filter Single Hole Mount Jam Nut Receptacle F-15 MIL-C-26482 Series 2/-83723 Series 1 Filter Connectors TPV Alternate Polarizing Positions Face view, pin insert SHELL SIZE N 8 W˚ 10 X˚ Z˚ 12 Y˚ Contact arrangements requiring reduced diameter for lead-in chamfer on outer row of contact cavities as indicated below. Shell 8 12 14 14 14 16 Contact Arrangements 33, 38 10 12 18 19 26 18 32 22 41 Contact Cavities A, B, C C, G A, B, C, D, E, F, G, and H A, C, E, G, J, and L B, D, F, H, K, and M A, B, C, D, E, F, G, H, J, K, L, M, N, P, and R) A, B, C, D, E, F,G, H, J, K, L, M, N, P, R, S, and T A, B, C, D, E, F, G, H, J, K, L, M, N, P, R, S, T, U, V, W, X, and Y 14 16 18 20 22 24 ARRANGEMENT 33 98 6 3 8 10 4 5 12 15 18 19 8 23 26 8 11 32 16 39 41 21 41 55 19 31 61 N 0˚ 0˚ 0˚ 0˚ 0˚ 0˚ 0˚ 0˚ 0˚ 0˚ 0˚ 0˚ 0˚ 0˚ 0˚ 0˚ 0˚ 0˚ 0˚ 0˚ 0˚ 0˚ 0˚ 0˚ 0˚ 0˚ 0˚ W 90˚ 90˚ 90˚ 60˚ 45˚ 40˚ 43˚ 17˚ 15˚ 30˚ 54˚ 158˚ 60˚ 180˚ 62˚ 85˚ 238˚ 63˚ 45˚ 16˚ 39˚ 30˚ 30˚ 90˚ 90˚ POS CODE X 112˚ 155˚ 92˚ 90˚ 110˚ 90˚ 165˚ 152˚ 270˚ 119˚ 138˚ 318˚ 144˚ 126˚ 135˚ 135˚ 142˚ 165˚ 225˚ 180˚ Y 180˚ 203˚ 270˚ 184˚ 155˚ 180˚ 315˚ 180˚ 275˚ 241˚ 222˚ 333˚ 252˚ 225˚ 175˚ 264˚ 226˚ 315˚ 225˚ 270˚ Z 292˚ 295˚ 273˚ 234˚ 270˚ 331˚ 338˚ 340˚ 265˚ 347˚ 333˚ 349˚ 314˚ 324˚ Special In-line Cable Filter Adapters Filter adapters are designed to be engaged between connectors in an existing circuit to provide instant filtering without having to rewire. They have pin contacts in the plug end and socket contacts in the end that mates with the receptacle. The filter is concentric around the central pin-socket contact. Electrical and operating characteristics are the same as in the standard TPV file connectors. THese adapters will mate with all MIL-C-26482 and MIL-C-83723 connectors having like contact arrangements. For proper performance both the mating receptacle and panel must have conductive finish. Please contact Customer Service for dimensions. Flange mounted in-line connectors, similar to MS3119, are also available. They are environmentally sealed and use the same filters as in regular TPV receptacles. Design permits engaging cable plugs to both ends. Filter Contact Customer Service for proper nomenclature and availability of the in-line cable adapters and in-line flange mounted TPV connectors. F Dimensions shown in inches (mm) Specifications and dimensions subject to change F-16 www.ittcannon.com