ca_J1-J50.qxd:Layout 1 2/10/11 8:51 AM Page 1 ca_J1-J50.qxd:Layout 1 2/10/11 8:51 AM Page 7 MIL-C-26482 Miniature Circular KPTH/PVAH • Pin contacts in a compression glass seal • Solder pot or eyelet termination • Leak rate not in excess of .01 micron cu. ft./hr. • 100 psi differential causes no detectable leakage in excess of .01 micron cu. ft./hr. • 100 g shock with no loss of hermeticity. • Thermetic shock from -75°C to +200°C without affecting leakage rate. ITT Cannon hermetically-sealed KPT and PVA (MILC-26842, Series I and II) connectors are designed for those applications and environments that require delicate mechanisms to be protected from variations in atmospheric pressure. These miniature, circular connectors have broadbase commercial, military and industrial applications, ranging from general purpose to space and lunar environments. The receptacles are available with pin contacts only and in three shell styles: box mounting KPT02H, solder mounting KPT01H, and jam nut KPT07H for Series I; box mounting PVA0, solder mounting PVA3, and jam nut PVA7 for Series II. Contact arrangements are tooled in a full leakfree compression glass web. How To Order KPT I MS 3113 KPTH - Series I SERIES PREFIX KPT — ITT Cannon Prefix MS — Complies with MIL-C-26482 Series I with interfacial seal (when specified as shown). MS designation 3113 — Solder Mounting Receptacle 3114 — Jam Nut Receptacle CLASS H — Hermetic SHELL SIZE 8, 10, 12, 14, 16, 18, 20, 22, 24 SHELL STYLE ITT Cannon Numbers: 0 — Box Mounting Receptacle 3 — Solder Mounting Receptacle 7 — Jam Nut Mounting MS designation 3440 — PVA0H 3443 — PVA3H 3449 — PVA7H CLASS H — Hermetic 32 32 P P N N CONTACT ARRANGEMENT CONTACT TYPE ALTERNATE INSERT POSITION MODIFICATION CODE MATERIAL AND CONTACT TERMINATION C — Steel Shell and Solder Pot Contacts (MS specification) Y — Steel Shell and Eyelet Contacts (MS specification) A — Stainless Shell & Solder Pot Contacts (not MS approved) B — Stainless Shell & Eyelet Contacts (not MS approved) No designator — Connector without face seal and with solder pot contacts and steel shell (not MS approved). J CONTACT ARRANGEMENTS See page J-8. CONTACT TYPE P — Pin S — Socket (Consult factory) ALTERNATE INSERT POLARIZATION N (normal), W, X, Y, and Z (N designator not applicable to MS) MODIFICATION CODE Consult factory (not applicable to MS). PVA 7 MS 3449 H H 18 18 B C 32 32 P P SERIES PREFIX SHELL STYLE CLASS SHELL SIZE MATERIAL AND CONTACT TERMINATION CONTACT ARRANGEMENT CONTACT TYPE ALTERNATE INSERT POLARIZATION SHELL SIZE 8, 10, 12, 14, 16, 18, 20, 22, 24 CONTACT TYPE P — Pin S — Socket (Consult factory) MATERIAL AND CONTACT TERMINATION B — PV only — Solder Pot Contacts C — MS only — Solder Pot Contacts ALTERNATE INSERT POLARIZATION N (normal), W, X, Y, and Z CONTACT ARRANGEMENTS See page J-8. Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com A C SERIES PREFIX SHELL STYLE CLASS SHELL SIZE MATERIAL AND CONTACT TERMINATION PVA - Series II SERIES PREFIX PVA — ITT Cannon Equivalent MIL-C-26482 (Series II) PV — ITT Cannon Prefix, Stainless Steel Hardware MS — Not currently available 18 18 J-7 MODIFICATION CODE Consult factory N N Hermetic Connectors SHELL STYLE ITT Cannon designation 01 — Solder Mounting Receptacle 02 — Box Mounting Receptacle (not available in MS) 07 — Jam Nut Mounting Receptacle H H ca_J1-J50.qxd:Layout 1 2/10/11 8:51 AM Page 8 Cannon KJL Miniature Connector KPTH/PVAH Standard Data ELECTRICAL MATERIALS AND FINISHES Number of contacts 2 thru 61 Wire Size, AWG #16, #20 Contact Termination Solder (PC Tails-Consult Factory) Contact Rating Service Rating KPT (Series I) Steel, electrodeposited tin over cadmium Compression glass Steel Shell Insulator Jam Nut Bayonet Pins Seals SIZE 20 16 RATED AMPS 7.5 22.0 TEST CURRENT 5.0 13.0 MV DROP 70 75 TEST VOLT Sea Level SERVICE 1 2 AC (rms) 1500 2300 DC 2100 3200 Silicone and polychloroprene O Ring (Flange) Contacts Nitrile Steel, electrodeposited tin over cadmium MECHANICAL KPT (Series I) 1 — Solder mounting receptacle 2 — Box mounting receptacle 7 — Jam nut mounting receptacle 8 thru 24 5 Keyway/3 point bayonet H — Hermetic Shell Styles Shell Sizes Polarization/Coupling Service Class Hermetic Connectors J PVA (Series II) Steel, .0001 min. tin over nickel Compression glass Steel, nickel plated Stainless steel Static and interfacial-fluorosilicone/ silicone elastomer Silicone elastomer Ferrous alloy, plated .00005 min. gold over nickel PVA (Series II) 0 — Box mounting receptacle 3 — Solder mounting receptacle 7 — Jam nut receptacle 8 thru 24 5 Keyway/3 point bayonet H — Hermetic Contact Arrangements Drawing not to scale; face view of pin insert shown Shell Size No. of Contacts Service Rating 8-2 2-#20 1 Shell Size No. of Contacts Service Rating 14-12 14-15 14-18 8-#20 4-#20 14-#16 1-#16 18-#20 1 1 1 Shell Size No. of Contacts Service Rating 8-3 3-#20 1 20-16 16-#16 2 8-4 4-#20 1 8-33 3-#20 1 20-41 41-#20 1 10-6 6-#20 1 14-19 19-#20 1 22-21 21-#16 2 10-98 6-#20 1 12-3 3-#16 2 16-8 8-#16 2 22-41 27-#20 14-#16 2 12-8 8-#20 1 16-26 26-#20 1 12-10 10-#20 1 18-11 11-#16 2 22-55 55-#20 1 14-5 5-#16 2 18-32 32-#20 1 24-61 61-#20 1 Alternate Insert Positions (Face view of pin insert) The diagram above indicates alternate insert positions. The five positions (W, X, Y, Z and Normal) differ in degree of rotation for various sizes and arrangements. For the exact degree of rotation, and for the list of contact arrangements and alternate positions available, refer to the tabulation at right. No. of Shell Contacts Size 2 8 8 3 8 4 8 10 6 10 3 12 8 12 10 12 5 14 12 14 15 14 Arr. No. 8-2 8-3 8-33 8-4 10-6 10-98 12-3 12-8 12-10 14-5 14-12 14-15 W 58 60 90 45 90 90 — 90 60 40 43 17 Degrees of Rotation X Y 122 — 210 — — — — — — — 180 240 — 180 112 203 155 270 92 184 90 — 110 155 Z — — — — — 270 — 292 295 273 — 234 No. of Shell Contacts Size 18 14 19 14 8 16 26 16 11 18 32 18 16 20 41 20 21 22 41 22 55 22 61 24 Arr. No. 14-18 14-19 16-8 16-26 18-11 18-32 20-16 20-41 22-21 22-41 22-55 24-61 W 15 30 54 60 62 85 238 45 16 39 30 90 Degrees of Rotation X Y 90 180 165 315 152 180 — 275 119 241 138 222 318 333 126 225 135 175 135 264 142 226 180 270 Z 270 — 331 338 340 265 347 — 349 196 314 324 Dimensions shown in inches (mm) Specifications and dimensions subject to change J-8 www.ittcannon.com ca_J1-J50.qxd:Layout 1 2/10/11 8:51 AM Page 9 MIL-C-26482 Miniature Circular KPTH/PVAH Box Mounting Receptacles KPT02H A + .001 (0.03) - .005 (0.13) B ± .020 (0.51) F K ± .020 (0.51) L ± .005 (0.13) N + .001 (0.03) - .005 (0.13) R ± .005 (0.13) S ± .010 (0.25) T ± .005 (0.13) V ± .010 (0.25) 8 10 12 14 15 18 20 22 24 .473 (12.01) .590 (14.99) .750 (19.05) .875 (22.22) 1.000 (25.40) 1.125 (28.58) 1.250 (31.75) 1.375 (34.92) 1.500 (38.10) 1.062 (26.97) 1.250 (31.57) 1.375 (34.82) 1.500 (38.10) 1.625 (41.28) 1.750 (44.45) 1.875 (47.62) 2.050 (52.07) 2.250 (57.15) .344 (8.74) .344 (8.74) .344 (8.74) .344 (8.74) .344 (8.74) .344 (8.74) .344 (8.74) .344 (8.74) .320 (8.13) .438 (11.13) .438 (11.13) .438 (11.13) .438 (11.13) .438 (11.13) .438 (11.13) .468 (11.89) .468 (11.89) .500 (12.70) .546 (13.87) .546 (13.87) .546 (13.87) .546 (13.87) .546 (13.87) .546 (13.87) .608 (15.44) .640 (16.26) .673 (17.09) .562 (14.27) .672 (17.07) .781 (19.84) .906 (23.01) 1.031 (26.19) 1.156 (29.36) 1.250 (31.75) 1.375 (34.92) 1.500 (38.10) .594 (15.09) .719 (18.26) .812 (20.62) .906 (22.99) .969 (24.62) 1.062 (26.97) 1.156 (29.36) 1.250 (31.75) 1.375 (34.92) .812 (20.62) .938 (23.83) 1.031 (26.19) 1.125 (28.58) 1.219 (30.96) 1.312 (33.32) 1.438 (36.53) 1.562 (39.67) 1.687 (42.85) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .147 (3.73) .062 (1.57) .062 (1.57) 062 (1.57) 062 (1.57) 062 (1.57) 062 (1.57) .094 (2.39) .094 (2.39) .094 (2.39) Solder Mounting Receptacles MS 3113H KPT01H Shell Size A + .001 (0.03) - .005 (0.13) F L ± .005 (0.13) N + .001 (0.03) - .005 (0.13) P ± .005 (0.13) S + .010 (0.25) - .016 (0.41) V ± .005 (0.13) 8 10 12 14 15 18 20 22 24 .473 (12.01) .590 (14.99) .750 (19.05) .875 (22.22) 1.000 (25.40) 1.125 (28.58) 1.250 (31.75) 1.375 (34.92) 1.500 (38.10) .370 (9.40) .370 (9.40) .370 (9.40) .370 (9.40) .370 (9.40) .370 (9.40) .370 (9.40) .370 (9.40) .340 (8.64) .546 (13.87) .546 (13.87) .546 (13.87) .546 (13.87) .546 (13.87) .546 (13.87) .608 (15.44) .640 (16.26) .673 (17.09) .562 (14.27) .672 (17.07) .781 (19.84) .906 (23.01) 1.031 (26.19) 1.156 (29.36) 1.250 (31.75) 1.375 (34.92) 1.500 (38.10) .031 (0.79) .031 (0.79) .031 (0.79) .031 (0.79) .031 (0.79) .031 (0.79) .031 (0.79) .031 (0.79) .031 (0.79) .631 (16.03) .756 (19.20) .850 (21.59) .975 (24.76) 1.100 (27.94) 1.224 (31.09) 1.318 (33.48) 1.444 (36.68) 1.569 (39.85) .421 (10.69) .421 (10.69) .421 (10.69) .421 (10.69) .421 (10.69) .421 (10.69) .485 (12.32) .485 (12.32) .518 (13.16) Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com J-9 J Hermetic Connectors Shell Size ca_J1-J50.qxd:Layout 1 2/10/11 8:51 AM Page 10 Cannon KJL Miniature Connector KPTH/PVAH Jam Nut Receptacle MS 3114H Hermetic Connectors J KPT07H Shell Size A - .003 (0.08) E ± .005 (0.13) G Max. K + .001 (0.03) - .016 (0.41) M ± .015 (0.38) Max. S Max. V Min. 8 10 12 14 15 18 20 22 24 .471 (11.96) .588 (14.94) .748 (19.00) .873 (22.17) .998 (25.35) 1.123 (28.52) 1.248 (31.70) 1.373 (34.87) 1.498 (38.05) .525 (13.34) .650 (16.51) .813 (20.65) .937 (23.80) 1.061 (26.95) 1.186 (30.12) 1.311 (33.30) 1.436 (36.47) 1.561 (39.65) 1.078 (27.38) 1.203 (30.56) 1.391 (35.33) 1.516 (38.51) 1.641 (41.68) 1.766 (44.86) 1.954 (49.63) 2.078 (52.78) 2.203 (55.96) .094 (2.39) .094 (2.39) .094 (2.39) .094 (2.39) .094 (2.39) .094 (2.39) .125 (3.18) .125 (3.18) .125 (3.18) .707 (17.96) .707 (17.96) .707 (17.96) .707 (17.96) .707 (17.96) .707 (17.96) .895 (22.73) .895 (22.73) .895 (22.73) .062 (1.57) .062 (1.57) .062 (1.57) .062 (1.57) .062 (1.57) .062 (1.57) .062 (1.57) .062 (1.57) .062 (1.57) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .250 (6.35) .250 (6.35) .250 (6.35) .954 (24.23) 1.078 (27.38) 1.266 (32.16) 1.391 (35.33) 1.516 (38.51) 1.641 (41.68) 1.828 (46.43) 1.954 (49.63) 2.078 (52.78) 9/16-24UNEF-2A 11/16-24UNEF-2A 7/8-20UNEF-2A 1-20UNEF-2A 1-1/8-18UNEF-2A 1-1/4-18UNEF-2A 1-3/8-18UNEF-2A 1-1/2-18UNEF-2A 1-5/8-18UNEF-2A P Panel Cutouts - KPTH Flange Mounted Receptacle (Front Mounting) KPT02H / KPT01H Shell Size L8 10 12 14 15 18 20 22 24 Jam Nut Receptacle A .565 (14.35) .675 (17.14) .784 (19.91) .909 (23.09) 1.034 (26.26) 1.159 (29.44) 1.253 (31.83) 1.378 (35.00) 1.503 (38.18) R* .594 (15.09) .719 (18.26) .812 (20.62) .906 (23.01) .969 (24.62) 1.062 (26.97) 1.156 (29.36) 1.250 (31.75) 1.375 (34.92) KPT02H ± .005 (0.13) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .155 (3.94) Screw Shell Size A KPT07H #4 #4 #4 #4 #4 #4 #4 #4 #6 8 10 12 14 15 18 20 22 24 .567 (14.35) .692 (17.14) .880 (19.91) 1.005 (23.09) 1.130 (26.26) 1.255 (29.44) 1.380 (31.83) 1.505 (35.00) 1.630 (38.18) B .531 (13.49) .656 (16.66) .819 (20.80) .943 (23.95) 1.067 (27.10) 1.192 (30.28) 1.317 (33.45) 1.442 (36.63) 1.567 (39.80) *Not used in KPT01H connectors. Dimensions shown in inches (mm) Specifications and dimensions subject to change J-10 www.ittcannon.com ca_J1-J50.qxd:Layout 1 2/10/11 8:51 AM Page 11 MIL-C-26482 Miniature Circular KPTH/PVAH Box Mounting Receptacles PV0H / PVA0H Shell Size .473 (12.01) .590 (14.99) .750 (19.05) .875 (22.22) 1.000 (25.40) 1.125 (28.58) 1.250 (31.75) 1.375 (34.92) 1.500 (38.10) 1.062 (26.97) 1.250 (31.57) 1.375 (34.82) 1.500 (38.10) 1.625 (41.28) 1.750 (44.45) 1.875 (47.62) 2.050 (52.07) 2.250 (57.15) .588 (14.94) .588 (14.94) .588 (14.94) .588 (14.94) .588 (14.94) .588 (14.94) .650 (16.51) .650 (16.51) .650 (16.51) .115 (2.92) .115 (2.92) .115 (2.92) .115 (2.92) .115 (2.92) .115 (2.92) .083 (2.11) .115 (2.92) .115 (2.92) .062 (1.57) .062 (1.57) .062 (1.57) .062 (1.57) .062 (1.57) .062 (1.57) .094 (2.39) .094 (2.39) .094 (2.39) L Max. Ref. .801 (20.35) .801 (20.35) .801 (20.35) .801 (20.35) .801 (20.35) .801 (20.35) .863 (21.92) .895 (22.73) .895 (22.73) Contact Ext. N + .001 (0.03) R S T U V - .005 (0.13) ± .005 (0.13) ± .010 (0.25) ± .005 (0.13) ± .030 (0.76) ± .030 (0.76) .562 (14.27) .672 (17.07) .781 (19.84) .906 (23.01) 1.031 (26.19) 1.156 (29.36) 1.250 (31.75) 1.375 (34.92) 1.500 (38.10) .594 (15.09) .719 (18.26) .812 (20.62) .906 (22.99) .969 (24.62) 1.062 (26.97) 1.156 (29.36) 1.250 (31.75) 1.375 (34.92) .812 (20.62) .938 (23.83) 1.031 (26.19) 1.125 (28.58) 1.219 (30.96) 1.312 (33.32) 1.438 (36.53) 1.562 (39.67) 1.687 (42.85) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .147 (3.73) .148 (3.76) .148 (3.76) .148 (3.76) .148 (3.76) .148 (3.76) .148 (3.76) .148 (3.76) .148 (3.76) .148 (3.76) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .186 (4.72) .186 (4.72) Solder Mounting Receptacle PV3H / PVA3H Shell Size A + .001 (0.03) - .005 (0.13) 8 10 12 14 15 18 20 22 24 .473 (12.01) .590 (14.99) .750 (19.05) .875 (22.22) 1.000 (25.40) 1.125 (28.58) 1.250 (31.75) 1.375 (34.92) 1.500 (38.10) F .588 (14.94) .588 (14.94) .588 (14.94) .588 (14.94) .588 (14.94) .588 (14.94) .650 (16.51) .650 (16.51) .650 (16.51) J ± .005 (0.13) L - .005 (0.13) N + .001 (0.03) - .005 (0.13) S ± .010 (0.25) U ± .005 (0.13) V ± .005 (0.13) .136 (3.45) .136 (3.45) .136 (3.45) .136 (3.45) .136 (3.45) .136 (3.45) .136 (3.45) .168 (4.27) .168 (4.27) .801 (20.35) .801 (20.35) .801 (20.35) .801 (20.35) .801 (20.35) .801 (20.35) .863 (21.92) .895 (22.73) .895 (22.73) .562 (14.27) .672 (17.07) .781 (19.84) .906 (23.01) 1.031 (26.19) 1.156 (29.36) 1.250 (31.75) 1.375 (34.92) 1.500 (38.10) .625 (15.88) .750 (19.05) .844 (21.44) .969 (24.62) 1.094 (27.79) 1.218 (30.94) 1.312 (33.32) 1.438 (36.53) 1.564 (39.73) .148 (3.76) .148 (3.76) .148 (3.76) .148 (3.76) .148 (3.76) .148 (3.76) .148 (3.76) .116 (2.95) .116 (2.95) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .186 (4.76) .186 (4.76) Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com J-11 J Hermetic Connectors 8 10 12 14 15 18 20 22 24 A + .001 (0.03) B F J G - .005 (0.13) ± .020 (0.51) ± .010 (0.25) ± .010 (0.25) ± .016 (0.41) ca_J1-J50.qxd:Layout 1 2/10/11 8:51 AM Page 12 MIL-C-26482 Miniature Circular KPTH/PVAH Jam Nut Receptacle PV7H / PVA7H A B Shell + .001 (0.03) + .016 (0.41) E J K L M Size - .005 (0.13) - .015 (0.38) ± .005 (0.13) ± .010 (0.25) ± .008 (0.20) Max. Ref. ± .008 (0.20) Hermetic Connectors J 8 10 12 14 15 18 20 22 24 .473 (12.01) .590 (14.99) .750 (19.05) .875 (22.22) 1.000 (25.40) 1.125 (28.58) 1.250 (31.75) 1.375 (34.92) 1.500 (38.10) 1.062 (26.97) 1.187 (31.75) 1.375 (34.92) 1.500 (38.10) 1.625 (41.28) 1.750 (44.45) 1.938 (47.62) 2.062 (52.07) 2.187 (57.15) .525 (13.34) .650 (16.51) .813 (20.65) .937 (23.80) 1.061 (26.95) 1.186 (30.12) 1.311 (33.30) 1.436 (36.47) 1.561 (39.65) .368 (9.35) .368 (9.35) .368 (9.35) .368 (9.35) .368 (9.35) .368 (9.35) .368 (9.35) .368 (9.35) .395 (10.03) .105 (2.67) .105 (2.67) .105 (2.67) .105 (2.67) .105 (2.67) .105 (2.67) .138 (3.51) .138 (3.51) .138 (3.51) .820 (20.83) .820 (20.83) .820 (20.83) .820 (20.83) .820 (20.83) .820 (20.83) .920 (23.37) .920 (23.37) .951 (24.16) .699 (17.75) .699 (17.75) .699 (17.75) .699 (17.75) .699 (17.75) .699 (17.75) .763 (19.38) .763 (19.38) .793 (20.14) P Min / Max S + .016 (0.41) - .015 (0.38) .062/.187 (1.57/4.75) .062/.187 (1.57/4.75) .062/.187 (1.57/4.75) .062/.187 (1.57/4.75) .062/.187 (1.57/4.75) .062/.187 (1.57/4.75) .062/.187 (1.57/4.75) .062/.187 (1.57/4.75) .062/.187 (1.57/4.75) .938 (23.83) 1.062 (14.99) 1.250 (19.05) 1.375 (34.92) 1.500 (38.10) 1.625 (41.28) 1.812 (46.02) 1.938 (49.23) 2.062 (52.37) T UNEF-2A .5625-24 .6875-24 .875 -20 1.000 -20 1.125 -18 1.250 -18 1.375 -18 1.500 -18 1.625 -18 Contact Ext. U V ± .030 (0.76) ± .030 (0.76) .104 (2.64) .104 (2.64) .104 (2.64) .104 (2.64) .104 (2.64) .104 (2.64) .069 (1.75) .069 (1.75) .039 (0.99) .174 (4.42) .174 (4.42) .174 (4.42) .174 (4.42) .174 (4.42) .174 (4.42) .139 (3.53) .139 (3.53) .109 (2.77) Dimensions shown in inches (mm) Specifications and dimensions subject to change J-12 www.ittcannon.com