VTSRC20-AC, VSSRC20-AC, VSORC20-AC Datasheet

VTSRC20-AC, VSSRC20-AC, VSORC20-AC
www.vishay.com
Vishay Dale Thin Film
25 mil or 50 mil Pitch,
Termination Thin Film Surface Mount Resistor/Capacitor Network
FEATURES
• Resistors and capacitors on a single chip
• Saves board space
• Reduces total assembly costs
• Uniform performance characteristics
• Compatible with automatic surface mounting equipment
• UL 94 V-0 flame resistant
Actual Size
• Rugged, molded case construction
• Compliant to RoHS Directive 2002/95/EC
Small outline, surface mount, EMI/RFI reduction, terminator networks
TYPICAL PERFORMANCE
Vishay Thin Film’s termination RC network Schematic AC,
can support 18 data lines reducing overall cost. Impedance
matching of transmission lines is easily done using VTF thin
film integrated RC networks. Our product is designed with
all components integrated within a single die. It is then
packaged in JEDEC standard plastic packages. The use of
surface mount technology offers improved design capability
through reduced parasitic inductance and capacitance.
Available packages SOIC, SSOP and TSSOP.
RESISTOR
CAPACITOR
TCR
TOLERANCE
200
10
TCC
TOLERANCE
200
20
STANDARD VALUES
MODELS
SCHEMATIC AC
20
19
18
VSORC
17
16
15
14
13
12
VSSRC
VTSRC
R ()
C (pF)
50
220
50
250
X
11
X
X
X
1
2
3
4
5
6
7
8
9
75
56
100
100
10
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
CONDITIONS
Tantalum nitride on silicon
-
Pin/Lead Number
20
-
Resistance Range
10  to 750 
-
TCR: Absolute
± 200 ppm/°C
0 °C to + 70 °C
Material
TCR: Tracking
± 10 ppm/°C
-
± 10 % standard (R), ± 20 % standard (C)
At 1 MHz and VRMS over + 10 °C to + 70 °C
Power Rating: Resistor
100 mW
-
Power Rating: Package
(T)SSOP: 1 W, SOIC: 1.2 W
See derating curve
±2%
1000 h
Tolerance: Absolute
Stability: Ratio
Operating Temperature Range
Storage Temperature Range
Capacitance Range
ESD Protection
Breakdown Voltage
Revision: 09-Sep-11
0 °C to + 70 °C
-
- 55 °C to + 125 °C
-
TSSOP: 10 pF to 150 pF, SOIC/SSOP: 10 pF to 250 pF
-
> 2 kV
MIL-STD-883, method 3015
35 V to 50 V
-
Document Number: 60085
150
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VTSRC20-AC, VSSRC20-AC, VSORC20-AC
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS in inches and millimeters
B
RES/CAP
C
Model
RES/CAP
Date
Code
E
xxxxx
xxx/xxx
xxxx
H
F
G
Pin 1
A
J
W
D
DIMENSION
A
JEDEC M0-153AC, VTSRC20-AC
JEDEC M0-137AD, VSSRC20-AC
JEDEC MS-013AC, VSORC20-AC
INCHES
MILLIMETERS
INCHES
MILLIMETERS
INCHES
MILLIMETERS
0.256 ± 0.003
6.5 ± 0.08
0.344 max.
8.74 max.
0.500 ± 0.010
12.7 ± 0.25
B (ref.)
0.025
0.65
0.025
0.64
0.050
1.27
C (ref.)
0.0087
0.22
0.010
0.25
0.016
0.41
D
0.004
0.10
0.006
0.15
0.008
0.20
E (typ.)
0.024
0.61
0.025
0.64
0.030
0.76
F
0.173 ± 0.003
4.39 ± 0.08
0.154 ± 0.003
3.9
0.293 ± 0.003
7.44
G
0.015 x 45°
0.38
0.015 x 45°
0.38
0.025 x 45°
0.64
H
0.252 ± 0.005
6.4 ± 0.13
0.236 ± 0.008
6.0 ± 0.20
0.406 ± 0.005
10.31
J (ref.)
0.005
0.13
0.010
0.25
0.010
0.25
W
0.043 ± 0.005
1.09 ± 0.13
0.064 ± 0.005
1.6
0.100 ± 0.005
2.59
IMPRINTING
VSORC, VSSRC, VTSRC
20
MODEL
PIN COUNT
AC
XXX
SCHEMATIC
RESISTANCE
Code: e.g.
100 = 10 
/
XXX
/
CAPACITANCE
Code: e.g.
101 = 100 pF
XXXX
Date code
Resistive Element
Tantalum nitride
Substrate Material
Silicon
Body
Molded epoxy
Terminals
Copper alloy
Plating
100 % matte Sn
Lead Coplanarity
Marking Resistance to
Solvents
DERATING CURVE
Precent of Rated Power
MECHANICAL SPECIFICATIONS
Optional marking
0.0005"
100
80
60
40
20
0
Permanency testing per
MIL-STD-202, method 215
- 50
0
25
70
125
150
Ambient Temperature °C
PACKING INFORMATION
MODEL
LEADS
TAPE AND REEL
TUBES
JEDEC M0-153AC, VTSRC (TSSOP)
20
2500
74
JEDEC M0-137AD, VSSRC (SSOP)
20
2500
55
JEDEC MS-013AC, VSORC (SOIC)
20
1000
38
Revision: 09-Sep-11
Document Number: 60085
151
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VTSRC20-AC, VSSRC20-AC, VSORC20-AC
www.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: VSSRC20AC330470TF
V
S
S
R
C
GLOBAL MODEL
VSSRC
VTSRC
VSORC
2
0
A
C
3
3
0
4
7
0
T
NUMBER OF LEADS/
SCHEMATICS
RESISTANCE AND TOLERANCE/
CAPACITANCE AND TOLERANCE
PACKAGING
20AC
xxxyyy
UF = TUBED
First 2 digits are significant figures.
Last digit specifies number of
zeros to follow.
TAPE AND REEL
TF = Full reels
F
K = 10 % resistance tol. fixed
M = 20 % capacitor tol. fixed
Historical Part Number example: VSSRC20AC330K470MT/R (for reference purposes only)
VSSRC
20
AC
330K
470M
T/R
MODEL
NUMBER
OF LEADS
SCHEMATIC
RESISTANCE
TOLERANCE
PACKAGING
Revision: 09-Sep-11
Document Number: 60085
152
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000