TCRT1000, TCRT1010 www.vishay.com Vishay Semiconductors Reflective Optical Sensor with Transistor Output FEATURES TCRT1000 TCRT1010 • Package type: leaded • Detector type: phototransistor • Dimensions (L x W x H in mm): 7 x 4 x 2.5 • Peak operating distance: 1 mm • Operating range within > 20 % relative collector current: 0.2 mm to 4 mm • Typical output current under test: IC = 0.5 mA 21836 • Daylight blocking filter • Emitter wavelength: 950 nm • Lead (Pb)-free soldering released A C E C • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 19155_1 DESCRIPTION APPLICATIONS The TCRT1000 and TCRT1010 are reflective sensors which include an infrared emitter and phototransistor in a leaded package which blocks visible light. • Optoelectronic scanning and switching devices i.e., index sensing, coded disk scanning etc. (optoelectronic encoder assemblies for transmissive sensing). PRODUCT SUMMARY PART NUMBER DISTANCE FOR MAXIMUM CTRrel (1) (mm) DISTANCE RANGE FOR TYPICAL OUTPUT RELATIVE Iout > 20 % CURRENT UNDER TEST (2) (mm) (mA) DAYLIGHT BLOCKING FILTER INTEGRATED TCRT1000 1 0.2 to 4 0.5 Yes TCRT1010 1 0.2 to 4 0.5 Yes Notes (1) CTR: current transfere ratio, I /I out in (2) Conditions like in table basic charactristics/sensor ORDERING INFORMATION PACKAGING VOLUME (1) REMARKS TCRT1000 Bulk MOQ: 1000 pcs, 1000 pcs/bulk Straight leads TCRT1010 Bulk MOQ: 1000 pcs, 1000 pcs/bulk Bent leads ORDERING CODE Note (1) MOQ: minimum order quantity ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT SENSOR Total power dissipation Tamb ≤ 25 °C Ptot 200 mW Ambient temperature range Tamb - 40 to + 85 °C Storage temperature range Tstg - 40 to + 100 °C Tsd 260 °C Soldering temperature 2 mm distance to package, t≤5s INPUT (EMITTER) Reverse voltage VR 5 V Forward current IF 50 mA Forward surge current Power dissipation Junction temperature tp ≤ 10 μs IFSM 3 A Tamb ≤ 25 °C PV 100 mW Tj 100 °C Document Number: 83752 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.8, 11-Jun-12 TCRT1000, TCRT1010 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT Collector emitter voltage VCEO 32 V Emitter collector voltage VECO 5 V IC 50 mA PV 100 mW Tj 100 °C OUTPUT (DETECTOR) Collector current Tamb ≤ 25 °C Power dissipation Junction temperature ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) P - Power Dissipation (mW) 300 Coupled device 200 Phototransistor 100 IR - diode 0 25 0 95 11071 50 75 100 Tamb - Ambient Temperature (°C) Fig. 1 - Power Dissipation Limit vs. Ambient Temperature BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. VCE = 5 V, IF = 20 mA, d = 1 mm (figure 2) IC (1) 0.3 0.5 MAX. UNIT SENSOR Collector current Cross talk current Collector emitter saturation voltage VCE = 5 V, IF = 20 mA, (figure 1) IF = 20 mA, IC = 0.1 mA, d = 1 mm (figure 2) ICX (2) VCEsat (1) mA 1 μA 0.3 V 1.6 V 7.5 mW/sr INPUT (EMITTER) Forward voltage IF = 50 mA Radiant intensity IF = 50 mA, tp = 20 ms Ie Peak wavelength IF = 100 mA λP Method: 63 % encircled energy d Collector emitter voltage IC = 1 mA VCEO 32 V Emitter collector voltage IE = 100 μA VECO 5 V VCE = 20 V, IF = 0 A, E = 0 lx ICEO Virtual source diameter VF 1.25 940 nm 1.2 mm OUTPUT (DETECTOR) Collector dark current 200 nA Notes (1) Measured with the “Kodak neutral test card”, white side with 90 % diffuse reflectance (2) Measured without reflecting medium Document Number: 83752 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.8, 11-Jun-12 TCRT1000, TCRT1010 www.vishay.com Vishay Semiconductors Reflecting medium (Kodak neutral test card) ~ ~~ ~ ~~ d Detector Emitter A C E C 95 10893 Fig. 2 - Test Condition BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 10.0 I C - Collector Current (mA) IF - Forward Current (mA) 1000 100 10 1 0.1 0 0.4 0.8 1.2 1.6 10 mA 5 mA 0.1 2 mA 0.1 1 10 100 V CE - Collector Emitter Voltage (V) Fig. 5 - Collector Current vs. Collector Emitter Voltage 2.0 100 CTR - Current Transfer Ratio (%) CTR rel - Relative Current Transfer Ratio 20 mA 95 11075 Fig. 3 - Forward Current vs. Forward Voltage 1.5 1.0 0.5 0 - 25 1.0 I F = 50 mA 0.01 2.0 VF - Forward Voltage (V) 96 11862 Kodak Neutral Card (White Side) d = 1 mm VCE = 5 V I F = 20 mA d = 1 mm 95 11074 0 25 50 75 100 Tamb - Ambient Temperature (°C) Fig. 4 - Relative Current Transfer Ratio vs. Ambient Temperature d = 1 mm VCE = 5 V 10 1 0.1 0.1 95 11076 1 10 100 I F - Forward Current (mA) Fig. 6 - Current Transfer Ratio vs. Forward Current Document Number: 83752 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.8, 11-Jun-12 TCRT1000, TCRT1010 www.vishay.com Vishay Semiconductors 120 VCE = 5 V I F = 20 mA I Crel - Relative Collector Current I C - Collector Current (mA) 10 1 0.1 0.01 Sensing Object 100 s 80 d 60 40 d = 1 mm VCE = 5 V I F = 20 mA 20 0 0 2 4 6 8 10 d - Distance (mm) 95 11077 Fig. 7 - Collector Current vs. Distance 1 95 11078 2 3 4 5 6 s - Displacement (mm) Fig. 8 - Relative Collector Current vs. Displacement PACKAGE DIMENSIONS in millimeters 14768 14769 Document Number: 83752 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.8, 11-Jun-12 Packaging and Ordering Information Vishay Semiconductors Packaging and Ordering Information PART NUMBER MOQ (1) PCS PER TUBE TUBE SPEC. (FIGURE) CONSTITUENTS (FORMS) CNY70 4000 80 1 28 TCPT1300X01 2000 Reel (2) 29 TCRT1000 1000 Bulk - 26 TCRT1010 1000 Bulk - 26 TCRT5000 4500 50 2 27 TCRT5000L 2400 48 3 27 TCST1030 5200 65 5 24 TCST1030L 2600 65 6 24 TCST1103 1020 85 4 24 TCST1202 1020 85 4 24 TCST1230 4800 60 7 24 TCST1300 1020 85 4 24 TCST2103 1020 85 4 24 TCST2202 1020 85 4 24 TCST2300 1020 85 4 24 TCST5250 4860 30 8 24 TCUT1300X01 2000 Reel (2) 29 TCZT8020-PAER 2500 Bulk - 22 Notes (1) MOQ: minimum order quantity (2) Please refer to datasheets TUBE SPECIFICATION FIGURES 15198 Fig. 1 Document Number: 80112 Rev. 1.1, 02-Jul-09 For technical questions, contact: [email protected] www.vishay.com 1 Packaging and Ordering Information Vishay Semiconductors Packaging and Ordering Information 15210 Fig. 2 15201 Fig. 3 www.vishay.com 2 For technical questions, contact: [email protected] Document Number: 80112 Rev. 1.1, 02-Jul-09 Packaging and Ordering Information Packaging and Ordering Information Vishay Semiconductors 15199 Fig. 4 15202 Fig. 5 Document Number: 80112 Rev. 1.1, 02-Jul-09 For technical questions, contact: [email protected] www.vishay.com 3 Packaging and Ordering Information Vishay Semiconductors Packaging and Ordering Information 15196 Fig. 6 15195 Fig. 7 www.vishay.com 4 For technical questions, contact: [email protected] Document Number: 80112 Rev. 1.1, 02-Jul-09 Packaging and Ordering Information Packaging and Ordering Information Vishay Semiconductors 20257 Fig. 8 Document Number: 80112 Rev. 1.1, 02-Jul-09 For technical questions, contact: [email protected] www.vishay.com 5 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000