Electronic Volume IC for Car Audio Systems

Ordering number : ENA1657
Bi-CMOS LSI
LV3328PM
For Car Audio Systems
Electronic Volume IC
Overview
The LV3328PM is an electronic volume and tone IC implements a rich set of audio control functions with a minimal
number of external components. Functions include input selection switching function, an input gain, volume, loudness,
balance, fader, general-purpose ports and bass/mid/treble control.
Features
• It is possible to eliminate from the external components of equalizer control block by SCF technology.
• Zero-cross switching circuits (Volume control block , Fader control block and General purpose volume block), soft step
(3 band equalizer control) and soft mute circuits used for low noise even when input signals are present.
• Low power consumption due to the use of BiCMOS process.
Functions
• Input switching :
Single-end inputs (3 input systems).
Single-end inputs (2 input systems) or differential input (1 input system).
Differential input (1 input system).
• Input gain control :
The input single can be amplified by 0 to +18dB (1dB steps.)
• Loudness control :
Taps are output starting at the -32dB position of the ladder resistor and a loudness function implemented with external
capacitor and resistor components.
• Volume control : +10dB to -79dB/-∞ (1dB steps)
L/R independent control.
• Bass control :
The bass control gain can be maximum boost +20dB position and maximum cut -20dB position.
( +20dB to -20dB in 1dB steps.)
The bass control center frequency 60Hz/70Hz/100Hz/120Hz can be selected.
The bass control quality factor 1.0/2.0 can be selected.
Continued on next page.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer' s products or
equipment.
40710 SY 20100129-S00004 No.A1657-1/26
LV3328PM
Continued from preceding page.
• Middle control :
The middle control gain can be maximum boost +20dB position and maximum cut -20dB position.
( +20dB to -20dB in 1dB steps.)
The middle control center frequency 700Hz/1KHz/1.2KHz can be selected.
The middle control quality factor 1.0/2.0 can be selected.
• Treble control :
The treble control gain can be maximum boost +20dB position and maximum cut -20dB position.
( +20dB to -20dB in 1dB steps.)
The treble control center frequency 7KHz/10KHz/11KHz/12KHz can be selected.
The treble control quality factor 1.0/2.0 can be selected.
• Fader control :
A total of 81 positions from 0 to -79dB in 1dB steps and -∞dB.
Independent control each four channels output
• General-purpose ports control :
Mono / stereo selection.
A total of 81 positions from 0 to -79dB in 1dB steps and -∞dB.
Fader-front output mix / general purpose output selection.
Input switching control block / general purpose input selection .
• Mute
Specifications
Absolute Maximum Ratings at Ta = 25°C, VSS = 0V
Parameter
Symbol
Conditions
Maximum supply voltage
VDD max
Maximum input voltage
VIN max
All input pins
Allowable power dissipation
Pd max
Ta ≤ 85°C, when mounted on a printed circuit
Ratings
Unit
VDD
10
VSS-0.3 to VDD
600
V
V
mW
board *
Operating temperature
Topr
-40 to +85
°C
Storage temperature
Tstg
-50 to +125
°C
* Specified circuit board : 114.3×76.1×1.6mm3 : glass epoxy board
Allowable Operating Ratings at Ta = 25°C, VSS = 0V
Parameter
Symbol
Conditions
Ratings
min
typ
max
9.0
Unit
Supply voltage
VDD
VDD
7.0
9.5
V
High-level input voltage
VIH
DATA, CLK, LEVDET
3.0
5.5
V
Low-level input voltage
VIL
DATA, CLK, LEVDET
VSS
1.0
Input pulse width
TφW
CLK
0.6
μs
DATA, CLK
0.1
μs
V
Setup time
Tsetup
Hold time
Thold
DATA, CLK
0.9
μs
Operating frequency
fopg
CLK
400
kHz
No.A1657-2/26
LV3328PM
Electrical Characteristics at Ta = 25°C, VDD = 9V, VSS = 0V
Parameter
Symbol
Conditions
Ratings
min
typ
max
Unit
Input block
Input resistance
Rin
L1-L3, R1-R3
50
L4-L7, R4-R7
kΩ
250
kΩ
Minimum input gain
Gin min
-1.0
0
+1.0
dB
Maximum input gain
Gin max
+17
+18
+19
dB
Inter-step setting error
ATerr
-1.0
+1.0
dB
Left/Right balance
BAL
-0.5
+0.5
dB
Volume block
Input resistance
Inter-step setting error
Left/Right balance
Rvr
LVRIN, RVRIN
200
kΩ
ATerr
+10dB to -40dB
-0.5
+0.5
dB
BAL
+10dB to -40dB
-0.5
+0.5
dB
±22
dB
Bass block
The maximum gain setting
Inter-step setting error
Gb max
max. boost/cut
±18
ATerr
-10dB to +10dB
-1.0
±20
+1.0
dB
-1.0
+1.0
dB
Left/Right balance
BAL
Center frequency
f01
60
f02
70
Hz
f03
100
Hz
Hz
Quality Factor
f04
120
Q01
1.0
Q02
2.0
Hz
Mid block
The maximum gain setting
Inter-step setting error
Gb max
max. boost/cut
±18
ATerr
-10dB to +10dB
-1.0
±20
+1.0
±22
dB
-1.0
+1.0
dB
dB
Left/Right balance
BAL
Center frequency
f01
700
Hz
f02
1
kHz
f03
1.2
kHz
Quality Factor
Q01
1.0
Q02
2.0
Treble block
The maximum gain setting
Inter-step setting error
Gb max
max. boost/cut
±18
ATerr
-10dB to +10dB
-1.0
±20
+1.0
±22
dB
-1.0
+1.0
dB
dB
Left/Right balance
BAL
Center frequency
f01
7
kHz
f02
10
kHz
f03
11
kHz
f04
12
kHz
Quality Factor
Q01
1.0
Q02
2.0
General port block
Input resistance
Rgp
EXLIN, EXRIN
50
kΩ
Inter-step setting error
ATerr
0dB to -40dB
-0.5
+0.5
dB
Left/Right balance
BAL
0dB to -40dB
-0.5
+0.5
dB
Input resistance
Rfed
LFIN, RFIN
Inter-step setting error
ATerr
0dB to -40dB
-0.5
+0.5
dB
Left/Right balance
BAL
0dB to -40dB
-0.5
+0.5
dB
Fader block
50
kΩ
No.A1657-3/26
LV3328PM
Overall Characteristics at Ta = 25°C, VDD = 9V, VSS = 0V
Parameter
Symbol
Conditions
Ratings
min
typ
Unit
max
A loss of insertion
ATT
Total harmonic distortion
THD
VIN = 1Vrms, f = 1kHz
0.01
%
Inter-input crosstalk
CT
VIN = 1Vrms, f = 1kHz
80
dB
Left/Right channel crosstalk
CT
VIN = 1Vrms, f = 1kHz
80
dB
Maximum attenuation
VO min
VIN = 1Vrms, f = 1kHz
80
dB
Output noise voltage
VN
IHF-A, Rin=1kΩ
11
μVrms
Current drain
IDD
Input high-level current
IIH
DATA, CLK, VIN = 5.5V
Input low-level current
IIL
DATA, CLK, VIN = 0V
Maximum input voltage
VCL
Common-mode rejection ratio
-1.0
+1.0
32
CMRR
dB
mA
10
μA
μA
-10
THD = 1% RL = 10kΩ
all controls flat, fIN = 1kHz
2.5
Vrms
VIN = 1Vrms, f = 1kHz
50
dB
Package Dimensions
unit : mm (typ)
3148A
13.2
13.2
10.0
1.0
10.0
44
1
0.8
0.35
0.2
2.8max
0.1 (2.5)
(1.0)
SANYO : QIP44M(10X10)
No.A1657-4/26
LV3328PM
L3
L4/L7M
L5/L7P
L6M
L6P
LSELO
LVRIN
LCT
LVROUT
LFIN
LFOUT
Pin Assignment
33
32
31
30
29
28
27
26
25
24
23
19 TEST2
VREG
38
18 DATA
MUTE
39
17 CLK
TEST1
40
16 LEVDET
VREF
41
15 TIM
EXRIN
42
14 DVSS
R1
43
13 EXROUT
R2
44
12 RROUT
1
2
3
4
5
6
7
8
9
10
11
RFOUT
37
RFIN
VDD
RVROUT
20 AVSS
RCT
36
RVRIN
EXLIN
RSELO
21 EXLOUT
R6P
35
R6M
L1
R5/R7P
22 LROUT
R4/R7M
34
R3
L2
PCA01517
No.A1657-5/26
R4/R7M
L3
R3
+
L2
R2
+
L1
R1
+
EXLIN
EXRIN
+
VREF
L4/L7M
+
TEST1
+
+
+
RVREF
BIAS
VOLTAGE
CIRCUIT
LVREF
DIFF INPUT(1)
DIFF SINGLE END
INPUT(1)
SINGLE-END INPUT(1)
DIFF INPUT(2)
DIFF SINGLE-END INPUT(2)
SINGLE-END INPUT(2)
SINGLE-END INPUT(2)
DIFF SINGLE-END INPUT(2)
DIFF INPUT(2)
SINGLE-END INPUT(1)
DIFF SINGLE END
INPUT(1)
DIFF INPUT(1)
+
VOLUME
INPUT
GAIN
+
3BAND_EQ
3BAND_EQ
RVROUT
VOLUME
ZERO CROSS DET
LOGIC
CIRCUIT
ZERO CROSS DET
INPUT
GAIN
LSELO
MUTE
CIRCUIT
+
+
R5/R7P
+
LVRIN
MUTE
+
L4/L7P
+
LCT
VREG
R6P
R6M
+
LVROUT
VDD
+
L6P
L6M
+
+
+
FADER
VOLUME
FADER
VOLUME
OSC
CONTROL
CIRCUIT
I2C
INTERFACE
LFIN
+
RFOUT
+
+
+
RROUT
SOFT_MUTE
SOFT_MUTE
SOFT_MUTE
VOLUME_C
SOFT_MUTE
SOFT_MUTE
SOFT_MUTE
VOLUME_C
FADER
VOLUME
FADER
VOLUME
LROUT
LFOUT
+
PA
PA
+
EXROUT
DVSS
TIM
LEVDET
CLK
DATA
TEST2
AVSS
EXLOUT
PA
PA
PA
5V or 3.3V
PA
LV3328PM
Block Diagram
RFIN
RCT
RVRIN
RSELO
No.A1657-6/26
LV3328PM
Pin Functions
Pin No.
Pin
35
L1
34
L2
33
L3
43
R1
44
R2
1
R3
Function
Equivalent Circuit
Single end input pins.
VDD
+
LVref
RVref
32
L4/L7M
Single end input pins/ Differential input pins
31
L5/L7P
When differential input is selected L4→L7M,
2
R4/R7M
L5→L7P, R4→R7M, R5→R7P
3
R5/R7P
VDD
+
LVref
RVref
30
L6M
29
L6P
4
R6M
5
R6P
Differential input pins.
VDD
+
LVref
RVref
28
LSELO
6
RSELO
Input selector output pins.
VDD
+
-
27
LVRIN
7
RVRIN
Main volume input pins.
VDD
+
-
LVref
RVref
26
LCT
8
RCT
Loudness function pins.
VDD
LVref
RVref
Continued on next page.
No.A1657-7/26
LV3328PM
Continued from preceding page.
Pin No.
Pin
25
LVROUT
9
RVROUT
Function
Equivalent Circuit
Tone output pins.
VDD
+
24
LFIN
Fader block input pins.
10
RFIN
Drive at low impedance.
VDD
LVref
RVref
23
LFOUT
Fader output pins.Attenuation is possible
22
LROUT
separately for the front end and rear end.
11
RFOUT
12
RROUT
41
VREF
VDD
+
Connect a capacitor of a few tens of uF
between VREF and AVSS (VSS) as a 0.5 ×
VDD
VDD voltage generator, current ripple
countermeasure.
+
LVref
RVref
38
VREG
Internal logic voltage pin.
VDD
+
VREG
37
VDD
Power supply pin.
20
AVSS
Analog ground pin.
14
DVSS
Digital ground pin
39
MUTE
External muting control pin.
Setting this pin to VSS level sets forcibly fader
volume block to -∞ level.
15
TIM
VDD
VREG
Timer pin when there is no signal in the zero
cross circuit.Forcibly set data when there is no
zero cross signal, from the time the data is set
VDD
VREG
until the timer ends.
Continued on next page.
No.A1657-8/26
LV3328PM
Continued from preceding page.
Pin No.
17
Pin
CLK
Function
Equivalent Circuit
Serial data clock input pin for control.
VDD
18
DATA
Serial data input pin for control.
16
LEVDET
Output level detection pin.
VDD
When the level detection unused:OPEN
40
TEST1
TEST pin
19
TEST2
Normally this pin is OPEN.
36
EXLIN
General-purpose port input pin.
42
EXRIN
VDD
LVref
RVref
21
EXLOUT
13
EXROUT
General-purpose port output pin.
VDD
+
No.A1657-9/26
LV3328PM
DATA format : I2C data specification
LSB MSB
R/W A
MSB
S
CHIP address
(Explanation)
S:Start Condition
P:Stop Condition
W:Write 0
R: Read 1
A:Ack(Acknowledge)
LSB MSB
A
LSB MSB
A
DATA_1
SUB address
LSB
AP
DATA_N
DATA setting
For continuous data transmission, the auto increment function causes data to be written into the sub-address DATA_(N+1). The
sub-address of DATA_29 is followed by DATA_1.
CHIP address
MSB
LSB
CP7 CP6 CP5 CP4 CP3 CP2 CP1 CP0
R/W
CP7
CP6
CP5
CP4
CP3
CP2
CP1
CP0
1
0
0
0
0
0
1
0
SUB address
MSB
LSB
SU7 SU6 SU5 SU4 SU3 SU2 SU1 SU0
SUB address
Block
SU7
SU6
SU5
SU4
SU3
SU2
SU1
SU0
Input selection (1)
DATA_1
1
0
0
0
0
0
0
0
Input selection (2)
DATA_2
0
1
0
0
0
0
0
0
Input gain control (Lch)
DATA_3
1
1
0
0
0
0
0
0
Input gain control (Rch)
DATA_4
0
0
1
0
0
0
0
0
Volume control (Lch)
DATA_5
1
0
1
0
0
0
0
0
Volume control(Rch)
DATA_6
0
1
1
0
0
0
0
0
BASS f0 Q setting(Lch)
DATA_7
1
1
1
0
0
0
0
0
BASS f0 Q setting(Rch)
DATA_8
0
0
0
1
0
0
0
0
MID f0 Q setting(Lch)
DATA_9
1
0
0
1
0
0
0
0
MID f0 Q setting(Rch)
DATA_10
0
1
0
1
0
0
0
0
TREBLE f0 Q setting(Lch)
DATA_11
1
1
0
1
0
0
0
0
TREBLE f0 Q setting(Rch)
DATA_12
0
0
1
1
0
0
0
0
BASS control (Lch)
DATA_13
1
0
1
1
0
0
0
0
BASS control (Rch)
DATA_14
0
1
1
1
0
0
0
0
MID control (Lch)
DATA_15
1
1
1
1
0
0
0
0
MID control (Rch)
DATA_16
0
0
0
0
1
0
0
0
TREBLE control (Lch)
DATA_17
1
0
0
0
1
0
0
0
TREBLE control (Rch)
DATA_18
0
1
0
0
1
0
0
0
General-purpose volume control (Lch)
DATA_19
1
1
0
0
1
0
0
0
General-purpose volume control (Rch)
DATA_20
0
0
1
0
1
0
0
0
Fader control (LFOUT)
DATA_21
1
0
1
0
1
0
0
0
Fader control (LROUT)
DATA_22
0
1
1
0
1
0
0
0
Fader control (RFOUT)
DATA_23
1
1
1
0
1
0
0
0
Fader control (RROUT)
DATA_24
0
0
0
1
1
0
0
0
General-purpose input, mixing, output level detection, FAD_rear
DATA_25
1
0
0
1
1
0
0
0
Loudness, Tone-pass select, EXTOUT output signal setting
DATA_26
0
1
0
1
1
0
0
0
Zero crossing control
DATA_27
1
1
0
1
1
0
0
0
Soft step/soft mute
DATA_28
0
0
1
1
1
0
0
0
TEST control
DATA_29
1
0
1
1
1
0
0
0
No.A1657-10/26
LV3328PM
DATA
MSB
LSB
D6
D7
D5
D4
D3
D2
D1
D0
DATA_1(input selection(1))
D7
D6
D5
D4
D3
D2
D1
D0
0
0
0
0
0
0
0
0
INMUTE
1
0
0
0
0
0
0
0
L1(R1):INPUT(1) setting
0
1
0
0
0
0
0
0
L2(R2):INPUT(1) setting
1
1
0
0
0
0
0
0
L3(R3):INPUT(1) setting
0
0
1
0
0
0
0
0
L4(R4):INPUT(1) setting
1
0
1
0
0
0
0
0
L5(R5):INPUT(1) setting
0
1
1
0
0
0
0
0
L6(R6):INPUT(1) setting
1
1
1
0
0
0
0
0
L7(R7):INPUT(1) setting*1
*1: The input is switched to the difference stereo input.(object chanel…L4(L7M),L5(L7P),R4(R7M),R5(R7P))
DATA_2(input selection(2))
D7
D6
D5
D4
D3
D2
D1
D0
0
0
0
0
0
0
0
0
INMUTE
1
0
0
0
0
0
0
0
L1(R1):INPUT(2) setting
0
1
0
0
0
0
0
0
L2(R2):INPUT(2) setting
1
1
0
0
0
0
0
0
L3(R3):INPUT(2) setting
0
0
1
0
0
0
0
0
L4(R4):INPUT(2) setting
1
0
1
0
0
0
0
0
L5(R5):INPUT(2) setting
0
1
1
0
0
0
0
0
L6(R6):INPUT(2) setting
1
1
1
0
0
0
0
0
L7(R7):INPUT(2) setting*2
*2: The input is switched to the difference stereo input. (object chanel…L4(L7M),L5(L7P),R4(R7M),R5(R7P))
DATA_3,DATA_4(input gain control)
D7
D6
D5
D4
D3
D2
D1
D0
DATA_3:Lch side
0
0
0
0
0
0
0
0
0dB
1
0
0
0
0
0
0
0
+1dB
0
1
0
0
0
0
0
0
+2dB
1
1
0
0
0
0
0
0
+3dB
0
0
1
0
0
0
0
0
+4dB
1
0
1
0
0
0
0
0
+5dB
0
1
1
0
0
0
0
0
+6dB
1
1
1
0
0
0
0
0
+7dB
0
0
0
1
0
0
0
0
+8dB
1
0
0
1
0
0
0
0
+9dB
DATA_4:Rch side
0
1
0
1
0
0
0
0
+10dB
1
1
0
1
0
0
0
0
+11dB
0
0
1
1
0
0
0
0
+12dB
1
0
1
1
0
0
0
0
+13dB
0
1
1
1
0
0
0
0
+14dB
1
1
1
1
0
0
0
0
+15dB
0
0
0
0
1
0
0
0
+16dB
1
0
0
0
1
0
0
0
+17dB
0
1
0
0
1
0
0
0
+18dB
No.A1657-11/26
LV3328PM
DATA_5,DATA_6(volume control):10dB to -40dB
D7
D6
D5
D4
D3
D2
D1
D0
DATA_5:Lch side
DATA_6:Rch side
0
1
1
0
1
1
1
0
10dB
1
1
1
0
1
1
1
0
9dB
0
0
0
1
1
1
1
0
8dB
1
0
0
1
1
1
1
0
7dB
0
1
0
1
1
1
1
0
6dB
1
1
0
1
1
1
1
0
5dB
0
0
1
1
1
1
1
0
4dB
1
0
1
1
1
1
1
0
3dB
0
1
1
1
1
1
1
0
2dB
1
1
1
1
1
1
1
0
1dB
0
0
0
0
0
0
0
0
0dB
1
0
0
0
0
0
0
0
-1dB
0
1
0
0
0
0
0
0
-2dB
1
1
0
0
0
0
0
0
-3dB
0
0
1
0
0
0
0
0
-4dB
1
0
1
0
0
0
0
0
-5dB
0
1
1
0
0
0
0
0
-6dB
1
1
1
0
0
0
0
0
-7dB
0
0
0
1
0
0
0
0
-8dB
1
0
0
1
0
0
0
0
-9dB
0
1
0
1
0
0
0
0
-10dB
1
1
0
1
0
0
0
0
-11dB
0
0
1
1
0
0
0
0
-12dB
1
0
1
1
0
0
0
0
-13dB
0
1
1
1
0
0
0
0
-14dB
1
1
1
1
0
0
0
0
-15dB
0
0
0
0
1
0
0
0
-16dB
1
0
0
0
1
0
0
0
-17dB
0
1
0
0
1
0
0
0
-18dB
1
1
0
0
1
0
0
0
-19dB
0
0
1
0
1
0
0
0
-20dB
1
0
1
0
1
0
0
0
-21dB
0
1
1
0
1
0
0
0
-22dB
1
1
1
0
1
0
0
0
-23dB
0
0
0
1
1
0
0
0
-24dB
1
0
0
1
1
0
0
0
-25dB
0
1
0
1
1
0
0
0
-26dB
1
1
0
1
1
0
0
0
-27dB
0
0
1
1
1
0
0
0
-28dB
1
0
1
1
1
0
0
0
-29dB
0
1
1
1
1
0
0
0
-30dB
1
1
1
1
1
0
0
0
-31dB
0
0
0
0
0
1
0
0
-32dB
1
0
0
0
0
1
0
0
-33dB
0
1
0
0
0
1
0
0
-34dB
1
1
0
0
0
1
0
0
-35dB
0
0
1
0
0
1
0
0
-36dB
1
0
1
0
0
1
0
0
-37dB
0
1
1
0
0
1
0
0
-38dB
1
1
1
0
0
1
0
0
-39dB
0
0
0
1
0
1
0
0
-40dB
No.A1657-12/26
LV3328PM
DATA_5,DATA_6(volume control):-41dB to -∞
D7
D6
D5
D4
D3
D2
D1
D0
DATA_5:Lch side
1
0
0
1
0
1
0
0
-41dB
0
1
0
1
0
1
0
0
-42dB
1
1
0
1
0
1
0
0
-43dB
0
0
1
1
0
1
0
0
-44dB
1
0
1
1
0
1
0
0
-45dB
0
1
1
1
0
1
0
0
-46dB
1
1
1
1
0
1
0
0
-47dB
0
0
0
0
1
1
0
0
-48dB
1
0
0
0
1
1
0
0
-49dB
0
1
0
0
1
1
0
0
-50dB
1
1
0
0
1
1
0
0
-51dB
0
0
1
0
1
1
0
0
-52dB
1
0
1
0
1
1
0
0
-53dB
0
1
1
0
1
1
0
0
-54dB
1
1
1
0
1
1
0
0
-55dB
0
0
0
1
1
1
0
0
-56dB
1
0
0
1
1
1
0
0
-57dB
0
1
0
1
1
1
0
0
-58dB
1
1
0
1
1
1
0
0
-59dB
0
0
1
1
1
1
0
0
-60dB
1
0
1
1
1
1
0
0
-61dB
0
1
1
1
1
1
0
0
-62dB
1
1
1
1
1
1
0
0
-63dB
0
0
0
0
0
0
1
0
-64dB
1
0
0
0
0
0
1
0
-65dB
0
1
0
0
0
0
1
0
-66dB
1
1
0
0
0
0
1
0
-67dB
0
0
1
0
0
0
1
0
-68dB
1
0
1
0
0
0
1
0
-69dB
0
1
1
0
0
0
1
0
-70dB
1
1
1
0
0
0
1
0
-71dB
0
0
0
1
0
0
1
0
-72dB
1
0
0
1
0
0
1
0
-73dB
0
1
0
1
0
0
1
0
-74dB
1
1
0
1
0
0
1
0
-75dB
0
0
1
1
0
0
1
0
-76dB
1
0
1
1
0
0
1
0
-77dB
0
1
1
1
0
0
1
0
-78dB
1
1
1
1
0
0
1
0
-79dB
0
0
0
0
1
0
1
0
-∞
DATA_6:Rch side
No.A1657-13/26
LV3328PM
DATA_7,DATA_8(BASS f0,Q setting)
D7
D6
D5
D4
D3
D2
D1
D0
DATA_7:Lch side
0
0
*
*
0
0
0
0
f0:60Hz
1
0
*
*
0
0
0
0
f0:70Hz
0
1
*
*
0
0
0
0
f0:100Hz
1
1
*
*
0
0
0
0
f0:120Hz
*
*
0
0
0
0
0
0
Q:1.00
*
*
1
0
0
0
0
0
Q:2.00
D1
D0
DATA_9:Lch side
DATA_8:Rch side
DATA_9,DATA_10(MID f0,Q setting)
D7
D6
D5
D4
D3
D2
DATA_10:Rch side
0
0
*
*
0
0
0
0
f0:700Hz
1
0
*
*
0
0
0
0
f0:1kHz
0
1
*
*
0
0
0
0
f0:1.2kHz
*
*
0
0
0
0
0
0
Q:1.00
*
*
1
0
0
0
0
0
Q:2.00
D0
DATA_11:Lch side
DATA_11,DATA_12(TREBLE f0,Q setting)
D7
D6
D5
D4
D3
D2
D1
DATA_12:Rch side
0
0
*
*
0
0
0
0
f0:7kHz
1
0
*
*
0
0
0
0
f0:10kHz
0
1
*
*
0
0
0
0
f0:11kHz
1
1
*
*
0
0
0
0
f0:12kHz
*
*
0
0
0
0
0
0
Q:1.00
*
*
1
0
0
0
0
0
Q:2.00
No.A1657-14/26
LV3328PM
DATA_13,DATA_14(TONE block BASS control)
D7
D6
D5
D4
D3
D2
D1
D0
DATA_13:Lch side
0
0
1
0
1
1
0
0
GAIN:+20dB
1
1
0
0
1
1
0
0
GAIN:+19dB
0
1
0
0
1
1
0
0
GAIN:+18dB
1
0
0
0
1
1
0
0
GAIN:+17dB
0
0
0
0
1
1
0
0
GAIN:+16dB
1
1
1
1
0
1
0
0
GAIN:+15dB
0
1
1
1
0
1
0
0
GAIN:+14dB
1
0
1
1
0
1
0
0
GAIN:+13dB
0
0
1
1
0
1
0
0
GAIN:+12dB
1
1
0
1
0
1
0
0
GAIN:+11dB
0
1
0
1
0
1
0
0
GAIN:+10dB
1
0
0
1
0
1
0
0
GAIN:+9dB
0
0
0
1
0
1
0
0
GAIN:+8dB
1
1
1
0
0
1
0
0
GAIN:+7dB
0
1
1
0
0
1
0
0
GAIN:+6dB
1
0
1
0
0
1
0
0
GAIN:+5dB
0
0
1
0
0
1
0
0
GAIN:+4dB
1
1
0
0
0
1
0
0
GAIN:+3dB
0
1
0
0
0
1
0
0
GAIN:+2dB
1
0
0
0
0
1
0
0
GAIN:+1dB
0
0
0
0
0
0
0
0
GAIN:0dB
1
0
0
0
0
0
0
0
GAIN:-1dB
0
1
0
0
0
0
0
0
GAIN:-2dB
1
1
0
0
0
0
0
0
GAIN:-3dB
0
0
1
0
0
0
0
0
GAIN:-4dB
1
0
1
0
0
0
0
0
GAIN:-5dB
0
1
1
0
0
0
0
0
GAIN:-6dB
1
1
1
0
0
0
0
0
GAIN:-7dB
0
0
0
1
0
0
0
0
GAIN:-8dB
1
0
0
1
0
0
0
0
GAIN:-9dB
0
1
0
1
0
0
0
0
GAIN:-10dB
1
1
0
1
0
0
0
0
GAIN:-11dB
0
0
1
1
0
0
0
0
GAIN:-12dB
1
0
1
1
0
0
0
0
GAIN:-13dB
0
1
1
1
0
0
0
0
GAIN:-14dB
1
1
1
1
0
0
0
0
GAIN:-15dB
0
0
0
0
1
0
0
0
GAIN:-16dB
1
0
0
0
1
0
0
0
GAIN:-17dB
0
1
0
0
1
0
0
0
GAIN:-18dB
1
1
0
0
1
0
0
0
GAIN:-19dB
0
0
1
0
1
0
0
0
GAIN:-20dB
DATA_14:Rch side
No.A1657-15/26
LV3328PM
DATA_15,DATA_16(TONE block MID control)
D7
D6
D5
D4
D3
D2
D1
D0
DATA_15:Lch side
0
0
1
0
1
1
0
0
GAIN:+20dB
1
1
0
0
1
1
0
0
GAIN:+19dB
0
1
0
0
1
1
0
0
GAIN:+18dB
1
0
0
0
1
1
0
0
GAIN:+17dB
0
0
0
0
1
1
0
0
GAIN:+16dB
1
1
1
1
0
1
0
0
GAIN:+15dB
0
1
1
1
0
1
0
0
GAIN:+14dB
1
0
1
1
0
1
0
0
GAIN:+13dB
0
0
1
1
0
1
0
0
GAIN:+12dB
1
1
0
1
0
1
0
0
GAIN:+11dB
0
1
0
1
0
1
0
0
GAIN:+10dB
1
0
0
1
0
1
0
0
GAIN:+9dB
0
0
0
1
0
1
0
0
GAIN:+8dB
1
1
1
0
0
1
0
0
GAIN:+7dB
0
1
1
0
0
1
0
0
GAIN:+6dB
1
0
1
0
0
1
0
0
GAIN:+5dB
0
0
1
0
0
1
0
0
GAIN:+4dB
1
1
0
0
0
1
0
0
GAIN:+3dB
0
1
0
0
0
1
0
0
GAIN:+2dB
1
0
0
0
0
1
0
0
GAIN:+1dB
0
0
0
0
0
0
0
0
GAIN:0dB
1
0
0
0
0
0
0
0
GAIN:-1dB
0
1
0
0
0
0
0
0
GAIN:-2dB
1
1
0
0
0
0
0
0
GAIN:-3dB
0
0
1
0
0
0
0
0
GAIN:-4dB
1
0
1
0
0
0
0
0
GAIN:-5dB
0
1
1
0
0
0
0
0
GAIN:-6dB
1
1
1
0
0
0
0
0
GAIN:-7dB
0
0
0
1
0
0
0
0
GAIN:-8dB
1
0
0
1
0
0
0
0
GAIN:-9dB
0
1
0
1
0
0
0
0
GAIN:-10dB
1
1
0
1
0
0
0
0
GAIN:-11dB
0
0
1
1
0
0
0
0
GAIN:-12dB
1
0
1
1
0
0
0
0
GAIN:-13dB
0
1
1
1
0
0
0
0
GAIN:-14dB
1
1
1
1
0
0
0
0
GAIN:-15dB
0
0
0
0
1
0
0
0
GAIN:-16dB
1
0
0
0
1
0
0
0
GAIN:-17dB
0
1
0
0
1
0
0
0
GAIN:-18dB
1
1
0
0
1
0
0
0
GAIN:-19dB
0
0
1
0
1
0
0
0
GAIN:-20dB
DATA_16:Rch side
No.A1657-16/26
LV3328PM
DATA_17,DATA_18(TONE block treble control)
D7
D6
D5
D4
D3
D2
D1
D0
DATA_17:Lch side
0
0
1
0
1
1
0
0
GAIN:+20dB
1
1
0
0
1
1
0
0
GAIN:+19dB
0
1
0
0
1
1
0
0
GAIN:+18dB
1
0
0
0
1
1
0
0
GAIN:+17dB
0
0
0
0
1
1
0
0
GAIN:+16dB
1
1
1
1
0
1
0
0
GAIN:+15dB
0
1
1
1
0
1
0
0
GAIN:+14dB
1
0
1
1
0
1
0
0
GAIN:+13dB
0
0
1
1
0
1
0
0
GAIN:+12dB
1
1
0
1
0
1
0
0
GAIN:+11dB
0
1
0
1
0
1
0
0
GAIN:+10dB
1
0
0
1
0
1
0
0
GAIN:+9dB
0
0
0
1
0
1
0
0
GAIN:+8dB
1
1
1
0
0
1
0
0
GAIN:+7dB
0
1
1
0
0
1
0
0
GAIN:+6dB
1
0
1
0
0
1
0
0
GAIN:+5dB
0
0
1
0
0
1
0
0
GAIN:+4dB
1
1
0
0
0
1
0
0
GAIN:+3dB
0
1
0
0
0
1
0
0
GAIN:+2dB
1
0
0
0
0
1
0
0
GAIN:+1dB
0
0
0
0
0
0
0
0
GAIN:0dB
1
0
0
0
0
0
0
0
GAIN:-1dB
0
1
0
0
0
0
0
0
GAIN:-2dB
1
1
0
0
0
0
0
0
GAIN:-3dB
0
0
1
0
0
0
0
0
GAIN:-4dB
1
0
1
0
0
0
0
0
GAIN:-5dB
0
1
1
0
0
0
0
0
GAIN:-6dB
1
1
1
0
0
0
0
0
GAIN:-7dB
0
0
0
1
0
0
0
0
GAIN:-8dB
1
0
0
1
0
0
0
0
GAIN:-9dB
0
1
0
1
0
0
0
0
GAIN:-10dB
1
1
0
1
0
0
0
0
GAIN:-11dB
0
0
1
1
0
0
0
0
GAIN:-12dB
1
0
1
1
0
0
0
0
GAIN:-13dB
0
1
1
1
0
0
0
0
GAIN:-14dB
1
1
1
1
0
0
0
0
GAIN:-15dB
0
0
0
0
1
0
0
0
GAIN:-16dB
1
0
0
0
1
0
0
0
GAIN:-17dB
0
1
0
0
1
0
0
0
GAIN:-18dB
1
1
0
0
1
0
0
0
GAIN:-19dB
0
0
1
0
1
0
0
0
GAIN:-20dB
DATA_18:Rch side
No.A1657-17/26
LV3328PM
DATA_19,DATA_20(General-purpose volume control):0dB to -54dB
D7
D6
D5
D4
D3
D2
D1
D0
DATA_19:Lch side
0
0
0
0
0
0
0
0
DATA_20:Rch side
0dB
1
0
0
0
0
0
0
0
-1dB
0
1
0
0
0
0
0
0
-2dB
1
1
0
0
0
0
0
0
-3dB
0
0
1
0
0
0
0
0
-4dB
1
0
1
0
0
0
0
0
-5dB
0
1
1
0
0
0
0
0
-6dB
1
1
1
0
0
0
0
0
-7dB
0
0
0
1
0
0
0
0
-8dB
1
0
0
1
0
0
0
0
-9dB
0
1
0
1
0
0
0
0
-10dB
1
1
0
1
0
0
0
0
-11dB
0
0
1
1
0
0
0
0
-12dB
1
0
1
1
0
0
0
0
-13dB
0
1
1
1
0
0
0
0
-14dB
1
1
1
1
0
0
0
0
-15dB
0
0
0
0
1
0
0
0
-16dB
1
0
0
0
1
0
0
0
-17dB
0
1
0
0
1
0
0
0
-18dB
1
1
0
0
1
0
0
0
-19dB
0
0
1
0
1
0
0
0
-20dB
1
0
1
0
1
0
0
0
-21dB
0
1
1
0
1
0
0
0
-22dB
1
1
1
0
1
0
0
0
-23dB
0
0
0
1
1
0
0
0
-24dB
1
0
0
1
1
0
0
0
-25dB
0
1
0
1
1
0
0
0
-26dB
1
1
0
1
1
0
0
0
-27dB
0
0
1
1
1
0
0
0
-28dB
1
0
1
1
1
0
0
0
-29dB
0
1
1
1
1
0
0
0
-30dB
1
1
1
1
1
0
0
0
-31dB
0
0
0
0
0
1
0
0
-32dB
1
0
0
0
0
1
0
0
-33dB
0
1
0
0
0
1
0
0
-34dB
1
1
0
0
0
1
0
0
-35dB
0
0
1
0
0
1
0
0
-36dB
1
0
1
0
0
1
0
0
-37dB
0
1
1
0
0
1
0
0
-38dB
1
1
1
0
0
1
0
0
-39dB
0
0
0
1
0
1
0
0
-40dB
1
0
0
1
0
1
0
0
-41dB
0
1
0
1
0
1
0
0
-42dB
1
1
0
1
0
1
0
0
-43dB
0
0
1
1
0
1
0
0
-44dB
1
0
1
1
0
1
0
0
-45dB
0
1
1
1
0
1
0
0
-46dB
1
1
1
1
0
1
0
0
-47dB
0
0
0
0
1
1
0
0
-48dB
1
0
0
0
1
1
0
0
-49dB
0
1
0
0
1
1
0
0
-50dB
1
1
0
0
1
1
0
0
-51dB
0
0
1
0
1
1
0
0
-52dB
1
0
1
0
1
1
0
0
-53dB
0
1
1
0
1
1
0
0
-54dB
No.A1657-18/26
LV3328PM
DATA_19,DATA_20(General-purpose volume control):-55dB to -∞
D7
D6
D5
D4
D3
D2
D1
D0
DATA_19:Lch side
1
1
1
0
1
1
0
0
DATA_20:Rch side
-55dB
0
0
0
1
1
1
0
0
-56dB
1
0
0
1
1
1
0
0
-57dB
0
1
0
1
1
1
0
0
-58dB
1
1
0
1
1
1
0
0
-59dB
0
0
1
1
1
1
0
0
-60dB
1
0
1
1
1
1
0
0
-61dB
0
1
1
1
1
1
0
0
-62dB
1
1
1
1
1
1
0
0
-63dB
0
0
0
0
0
0
1
0
-64dB
1
0
0
0
0
0
1
0
-65dB
0
1
0
0
0
0
1
0
-66dB
1
1
0
0
0
0
1
0
-67dB
0
0
1
0
0
0
1
0
-68dB
1
0
1
0
0
0
1
0
-69dB
0
1
1
0
0
0
1
0
-70dB
1
1
1
0
0
0
1
0
-71dB
0
0
0
1
0
0
1
0
-72dB
1
0
0
1
0
0
1
0
-73dB
0
1
0
1
0
0
1
0
-74dB
1
1
0
1
0
0
1
0
-75dB
0
0
1
1
0
0
1
0
-76dB
1
0
1
1
0
0
1
0
-77dB
0
1
1
1
0
0
1
0
-78dB
1
1
1
1
0
0
1
0
-79dB
0
0
0
0
1
0
1
0
-∞
DATA_21,DATA_22,DATA_23,DATA_24(Fader control):0dB to -25dB
D7
D6
D5
D4
D3
D2
D1
D0
DATA_21:LFOUT, DATA_22:LROUT
0
0
0
0
0
0
0
0
DATA_23:RFOUT, DATA_24:RROUT
0dB
1
0
0
0
0
0
0
0
-1dB
0
1
0
0
0
0
0
0
-2dB
1
1
0
0
0
0
0
0
-3dB
0
0
1
0
0
0
0
0
-4dB
1
0
1
0
0
0
0
0
-5dB
0
1
1
0
0
0
0
0
-6dB
1
1
1
0
0
0
0
0
-7dB
0
0
0
1
0
0
0
0
-8dB
1
0
0
1
0
0
0
0
-9dB
0
1
0
1
0
0
0
0
-10dB
1
1
0
1
0
0
0
0
-11dB
0
0
1
1
0
0
0
0
-12dB
1
0
1
1
0
0
0
0
-13dB
0
1
1
1
0
0
0
0
-14dB
1
1
1
1
0
0
0
0
-15dB
0
0
0
0
1
0
0
0
-16dB
1
0
0
0
1
0
0
0
-17dB
0
1
0
0
1
0
0
0
-18dB
1
1
0
0
1
0
0
0
-19dB
0
0
1
0
1
0
0
0
-20dB
1
0
1
0
1
0
0
0
-21dB
0
1
1
0
1
0
0
0
-22dB
1
1
1
0
1
0
0
0
-23dB
0
0
0
1
1
0
0
0
-24dB
1
0
0
1
1
0
0
0
-25dB
No.A1657-19/26
LV3328PM
DATA_21,DATA_22,DATA_23,DATA_24(Fader control):-26dB to -∞
D7
D6
D5
D4
D3
D2
D1
D0
DATA_21:LFOUT, DATA_22:LROUT
0
1
0
1
1
0
0
0
DATA_23:RFOUT, DATA_24:RROUT
-26dB
1
1
0
1
1
0
0
0
-27dB
0
0
1
1
1
0
0
0
-28dB
1
0
1
1
1
0
0
0
-29dB
0
1
1
1
1
0
0
0
-30dB
1
1
1
1
1
0
0
0
-31dB
0
0
0
0
0
1
0
0
-32dB
1
0
0
0
0
1
0
0
-33dB
0
1
0
0
0
1
0
0
-34dB
1
1
0
0
0
1
0
0
-35dB
0
0
1
0
0
1
0
0
-36dB
1
0
1
0
0
1
0
0
-37dB
0
1
1
0
0
1
0
0
-38dB
1
1
1
0
0
1
0
0
-39dB
0
0
0
1
0
1
0
0
-40dB
1
0
0
1
0
1
0
0
-41dB
0
1
0
1
0
1
0
0
-42dB
1
1
0
1
0
1
0
0
-43dB
0
0
1
1
0
1
0
0
-44dB
1
0
1
1
0
1
0
0
-45dB
0
1
1
1
0
1
0
0
-46dB
1
1
1
1
0
1
0
0
-47dB
0
0
0
0
1
1
0
0
-48dB
1
0
0
0
1
1
0
0
-49dB
0
1
0
0
1
1
0
0
-50dB
1
1
0
0
1
1
0
0
-51dB
0
0
1
0
1
1
0
0
-52dB
1
0
1
0
1
1
0
0
-53dB
0
1
1
0
1
1
0
0
-54dB
1
1
1
0
1
1
0
0
-55dB
0
0
0
1
1
1
0
0
-56dB
1
0
0
1
1
1
0
0
-57dB
0
1
0
1
1
1
0
0
-58dB
1
1
0
1
1
1
0
0
-59dB
0
0
1
1
1
1
0
0
-60dB
1
0
1
1
1
1
0
0
-61dB
0
1
1
1
1
1
0
0
-62dB
1
1
1
1
1
1
0
0
-63dB
0
0
0
0
0
0
1
0
-64dB
1
0
0
0
0
0
1
0
-65dB
0
1
0
0
0
0
1
0
-66dB
1
1
0
0
0
0
1
0
-67dB
0
0
1
0
0
0
1
0
-68dB
1
0
1
0
0
0
1
0
-69dB
0
1
1
0
0
0
1
0
-70dB
1
1
1
0
0
0
1
0
-71dB
0
0
0
1
0
0
1
0
-72dB
1
0
0
1
0
0
1
0
-73dB
0
1
0
1
0
0
1
0
-74dB
1
1
0
1
0
0
1
0
-75dB
0
0
1
1
0
0
1
0
-76dB
1
0
1
1
0
0
1
0
-77dB
0
1
1
1
0
0
1
0
-78dB
1
1
1
1
0
0
1
0
-79dB
0
0
0
0
1
0
1
0
-∞
No.A1657-20/26
LV3328PM
DATA_25 (General-purpose input switch, Mixing, Output level detection, FADER_Rear input switch)
D7
D6
D5
D4
D3
D2
D1
D0
DATA_25
0
*
*
*
*
*
*
*
General-purpose input mode switch:stereo mode
1
*
*
*
*
*
*
*
General-purpose input mode switch:MONO
*
0
0
*
*
*
*
*
Lch/Rch mixing : OFF
*
1
0
*
*
*
*
*
Lch mixing : ON, Rch mixing : OFF
*
0
1
*
*
*
*
*
Lch mixing : OFF, Rch mixing : ON
*
1
1
*
*
*
*
*
Lch/Rch mixing : ON
*
*
*
0
0
*
*
*
General-purpose input select:EXLIN/EXRIN
*
*
*
1
0
*
*
*
General-purpose input select:EXRIN only select
*
*
*
0
1
*
*
*
General-purpose input select:EXLIN only select
*
*
*
*
*
0
*
*
Output level detection : OFF
*
*
*
*
*
1
*
*
Output level detection : ON
*
*
*
*
*
*
0
0
FADER_REAR_L/Rch input1 select
*
*
*
*
*
*
1
0
FADER_REAR_Lch:input2, Rch:input1 select
*
*
*
*
*
*
0
1
FADER_REAR_Lch:input1, Rch:input2 select
*
*
*
*
*
*
1
1
FADER_REAR_L/Rch input2 select
DATA_26 (Loudness control, TONE pass switch, EXTOUT output signal select)
D7
D6
D5
D4
D3
D2
D1
D0
DATA_26
0
0
*
*
*
*
0
0
Loudness:OFF
1
0
*
*
*
*
0
0
Loudness:ON
*
*
0
0
*
*
0
0
The tone block pass operation is not done.
*
*
1
0
*
*
0
0
Tone block pass operation execution only of Lch side.
*
*
0
1
*
*
0
0
Tone block pass operation execution only of Rch side.
*
*
1
1
*
*
0
0
Tone block pass operation execution of Lch and Rch side.
*
*
*
*
0
*
0
0
EXTOUT outputs signal Lch: EXTIN
*
*
*
*
1
*
0
0
EXTOUT outputs signal Lch: input 2
*
*
*
*
*
0
0
0
EXTOUT outputs signal Rch: EXTIN
*
*
*
*
*
1
0
0
EXTOUT outputs signal Rch: input 2
DATA_27 (Zero cross control)
D7
D6
D5
D4
D3
D2
D1
D0
DATA_27
0
*
*
*
*
0
0
0
Zerocross control:OFF
1
*
*
*
*
0
0
0
Zerocross control:ON
*
0
0
*
*
0
0
0
Zerocross detection:Input GAIN(LSELO)
*
1
0
*
*
0
0
0
Zerocross detection:Main volume(LVROUT)
*
0
1
*
*
0
0
0
Zerocross detection:Fader(LFOUT)
*
1
1
*
*
0
0
0
Zerocross detection:Fader(LROUT)
*
*
*
0
0
0
0
0
Zerocross detection:Input GAIN(RSELO)
*
*
*
1
0
0
0
0
Zerocross detection:Main volume(RVROUT)
*
*
*
0
1
0
0
0
Zerocross detection:Fader(RFOUT)
*
*
*
1
1
0
0
0
Zerocross detection:Fader(RROUT)
No.A1657-21/26
LV3328PM
DATA_28 (Soft_step/Soft_mute control)
D7
D6
D5
D4
D3
D2
D1
D0
DATA_28
0
*
*
*
*
*
*
*
Soft_mute mode:OFF
1
*
*
*
*
*
*
*
Soft_mute mode:ON
*
0
*
*
*
*
*
*
Mute select:OFF
*
1
*
*
*
*
*
*
Mute select:ON
*
*
0
*
*
*
*
*
Soft_step:OFF
*
*
1
*
*
*
*
*
Soft_step:ON
*
*
*
0
*
*
*
*
Usually mode
*
*
*
1
*
*
*
*
TEST mode
*
*
*
*
0
0
*
*
Mute time:0.64ms
*
*
*
*
1
0
*
*
Mute time:5.12ms
*
*
*
*
0
1
*
*
Mute time:40ms
*
*
*
*
1
1
*
*
Mute time:80ms
*
*
*
*
*
*
0
0
Soft_step time:10ms
*
*
*
*
*
*
1
0
Soft_step time:20ms
*
*
*
*
*
*
0
1
Soft_step time:40ms
*
*
*
*
*
*
1
1
Soft_step time:80ms
DATA_29 (TEST control)
D7
D6
D5
D4
D3
D2
D1
D0
DATA_29
0
0
0
0
0
0
0
0
Setting at operation use usually
No.A1657-22/26
LV3328PM
Usage Cautions
(1) Request to send the initial data at power ON
• Though the circuit initializing the IC inside at power ON is incorporated, be sure to send data to all sub-address as the
initial data at power ON.
• At power ON, muting or other measures must be taken externally till the data is set.
Reference data
Parameter
Symbol
VDD power rise time
Trise
VDD voltage when power ON reset is canceled
Vpor
Conditions
Min
0V → 5V power rise time
Typ
Max
Unit
30
-
-
μs
-
5
-
V
(2) Description of zero cross switching circuit operation
The LV3328PM have a function to switch zero cross comparator signal detection locations, enabling the selection of
the optimum detection location for blocks whose data is to be updated.Basically, the switching noise can be
minimized by inputting the signal immediately following the block whose data is to be updated to the zero cross
comparator, so it is necessary to switch the detection location every time.
Input gain
Volume
Fader
Switch
Zero cross
comparator
LV3328PM zero cross detection circuit
(3) Zero Cross Switching Control method
The zero cross switching control method consists of setting the zero cross control bits to the zero cross detection mode,
and specifying the detection blocks before transmitting the data.
The I2C data is held at rise of the ACK clock. For zero-cross operation, this operation begins at rise of ACK clock of
the first data.
On detecting zero cross, all of holding data are switched. (Without zero cross, data is switched at rise of ACK clock.)
(4) Zero cross timer setting
If the input signal becomes lower than the zero cross comparator detection sensitivity, or if only low-frequency
signals are input, zero cross detection continues to be impossible, and data is not latched during this time. The zero
cross timer can set a time for forcible latch during such a status when zero cross detection is not possible.
(5) Soft step operation
The LV3328PM have a soft step function at 3 band equalizer control block for low switching noise.
The Soft step time can be selected by send to I2C control. (l0ms, 20ms, 40ms, 80ms)
Data latch timing
soft step start
soft step time
No.A1657-23/26
LV3328PM
(6) Soft mute operation
The LV3328PM have a soft mute function for low switching noise, when this mute function set operation.
(mute/unmute function select)
The Soft mute time can be selected by send to I2C control. (0.6ms, 5ms, 40ms, 80ms)
A soft mute function can be implemented by set to soft mute on. (Set to mute on/off)
Soft mute time
Soft mute time
(7) Cautions for input switching (method to reduce the switching noise at a time of channel setting)
When switching the input channel, carry out soft muting beforehand. After completion of muting, carry out channel
switching. Then, cancel muting (canceling through soft muting ), and complete input switching (recommendation by
SANYO).
Note also that, regardless of whether each input channel is set to ON or OFF, the external input voltage is less than the
maximum input voltage (VCL) in all input channels.
No.A1657-24/26
LV3328PM
Application Circuit Example
220pF
+
R1
+
R2
LFOUT
LFIN
LVROUT
LCT
LVRIN
LSELO
L6P
L6M
39
17
40
16
41
15
42
14
43
13
44
12
1
+
2
+
3
4
+
5
+
+
6
7
+
220pF
8
9
10
+
LROUT
+
PA
+
PA
EXLOUT
AVSS
TEST2
DATA
CLK
5V or 3.3V
LEVDET
TIM
DVSS
EXROUT
+
PA
RROUT
+
PA
11
RFOUT
+EXRIN
23
18
RFIN
VREF
24
38
RVROUT
+
25
19
RCT
TEST1
26
37
RVRIN
MUTE
27
20
RSELO
+ VREG
28
36
R6P
VDD
29
21
R6M
+ EXLIN
30
PA
+
35
R5/R7P
L1
31
+
+
+
22
R4/R7M
+
32
+
34
R3
L2
+
L5/L7P
L3
33
+
+
L4/L7M
+
+
PA
PCA01523
No.A1657-25/26
LV3328PM
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using
products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd.
products described or contained herein.
SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all
semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or
malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise
to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt
safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not
limited to protective circuits and error prevention circuits for safe design, redundant design, and structural
design.
In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are
controlled under any of applicable local export control laws and regulations, such products may require the
export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise,
without the prior written consent of SANYO Semiconductor Co.,Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the
SANYO Semiconductor Co.,Ltd. product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed
for volume production.
Upon using the technical information or products described herein, neither warranty nor license shall be granted
with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third
party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's
intellctual property rights which has resulted from the use of the technical information and products mentioned
above.
This catalog provides information as of April, 2010. Specifications and information herein are subject
to change without notice.
PS No.A1657-26/26