DGD2110/2113 HIGH-SIDE AND LOW-SIDE GATE DRIVERS IN SO-16 (TYPE TH) Description Features The DGD2110 and DGD2113 are high-voltage / high-speed MOSFET and IGBT drivers with independent high-side and low-side outputs. The high-side driver features floating supply for operation at up to 500V/600V. The 10ns (max) / 20ns (max) propagation delay matching between the high and the low side drivers allows high-frequency operation. The DGD2110 and DGD2113 logic inputs are compatible with standard CMOS levels (as low as 3.3V) while driver outputs feature high-pulse current buffers designed for minimum driver cross conduction. The DGD2110 and DGD2113 are offered in a 16-pin SO (Type TH) package. They operate over an extended -40°C to +125°C temperature range. Drives two N-Channel MOSFETs or IGBTs in high-side/low-side configuration Floating high-side operates to 600V 2.5A sink / 2.5A source typical output currents Outputs tolerant to negative transients Wide gate driver supply voltage range: 10V to 20V Wide logic input supply voltage range: 3.3V to 20V Wide logic supply offset voltage range: -5V to 5V 15ns (typ) rise / 13ns (typ) fall times with 1000pF load 105ns (typ) turn-on / 94ns (typ) turn-off delay times Cycle-by-cycle edge-triggered shutdown circuitry Extended temperature range: -40°C to +125°C Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony free. “Green” Device (Note 3) Applications Mechanical Data DC-DC Converters DC-AC Inverters AC-DC Power Supplies Motor Controls Class D Power Amplifiers Case: SO-16 (Type TH) Case Material: Molded Plastic. “Green” Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 3 per J-STD-020 Terminals: Finish – Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 Weight: 0.130 grams (Approximate) SO-16 (Type TH) Typical Configuration Top View Ordering Information (Note 4) Product DGD2110S16-13 DGD2113S16-13 Notes: Marking DGD2110 DGD2113 Reel size (inches) 13 13 Tape width (mm) 16 16 Quantity per reel 1,500 1,500 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. For packaging details, go to our website at http://www.diodes.com/products/packages.html. Marking Information DGD211x YY WW DGD2110/2113 Document Number DS38271 Rev. 4 - 2 = Manufacturer’s Marking DGD211x = Product Type Marking Code (See Table Above) YY = Year (ex: 16 = 2016) WW = Week (01 - 53) 1 of 12 www.diodes.com February 2016 © Diodes Incorporated DGD2110/2113 Pin Diagrams Top view: SO-16 (Type TH) Pin Descriptions Pin Number 1 2 3 4,5,9,10,16 6 7 8 11 12 13 14 15 Pin Name LO COM VCC NC VS VB HO VDD HIN SD LIN VSS Function Low-side gate driver output pin Low-side gate driver power supply return pin Low-side gate driver power supply pin “No connect” pin (No Internal Connection) High-side gate driver floating power supply return pin High-side gate driver floating power supply pin High-side gate drive output pin Logic power supply pin Logic input pin for high-side gate driver output. HIN and HO are in phase Logic input shutdown pin Logic input pin for low-side gate driver output. LIN and LO are in phase Logic ground pin Functional Block Diagram DGD2110/2113 Document Number DS38271 Rev. 4 - 2 2 of 12 www.diodes.com February 2016 © Diodes Incorporated DGD2110/2113 Absolute Maximum Ratings (@TA = +25°C, unless otherwise specified.) Characteristic High-side floating supply voltage (DGD2110) High-side floating supply voltage (DGD2113) High-side floating supply offset voltage High-side floating output voltage Offset supply voltage transient Low-side fixed supply voltage Low-side output voltage Logic supply voltage Logic supply offset voltage Logic input voltage (HIN, LIN and SD) Symbol VB VB VS VHO dVS / dt VCC VLO VDD VSS VIN Value -0.3 to +524 -0.3 to +624 VB-24 to VB+0.3 VS-0.3 to VS+0.3 50 -0.3 to +24 -0.3 to VCC+0.3 -0.3 to VSS+24 VCC-24 to VCC+0.3 VSS-0.3 to VDD+0.3 Unit V V V V V/ns V V V V V Thermal Characteristics (@TA = +25°C, unless otherwise specified.) Characteristic Power Dissipation Linear derating factor (Note 5) Symbol PD Value 1.25 Unit W Thermal Resistance, Junction to Ambient (Note 5) Thermal Resistance, Junction to Case (Note 5) Operating Temperature Lead Temperature (soldering, 10 seconds) Storage Temperature Range RθJA RθJC TJ TL TSTG 90 45 +150 +300 -55 to +150 °C/W °C/W Note: °C 5. When mounted on a standard JEDEC 2-layer FR-4 board. Recommended Operating Conditions Parameter High-side floating supply absolute voltage High-side floating supply offset voltage High-side floating supply offset voltage High-side floating output voltage Low-side fixed supply voltage Low-side output voltage Logic supply voltage Logic supply offset voltage Logic input voltage (HIN, LIN and SD) Ambient temperature Notes: DGD2110 DGD2113 Symbol VB VS VS VHO VCC VLO VDD VSS VIN TA Min VS + 10 (Note 6) (Note 6) Max VS + 20 500 600 VS 10 0 VSS + 3 -5 (Note 7) VSS -40 VB 20 VCC VSS + 20 5 VDD +125 Unit V V V V V V V V V °C 6. Logic operation for VS = -4V to +500V. Logic state held for VS = -4V to -VBS. 7. When VDD <5V, the minumum VSS offset is limited to -VDD. DGD2110/2113 Document Number DS38271 Rev. 4 - 2 3 of 12 www.diodes.com February 2016 © Diodes Incorporated DGD2110/2113 DC Electrical Characteristics (VBIAS (VCC, VBS, VDD) = 15V, VSS = COM, @TA = +25°C unless otherwise specified.) (Note 8) Parameter Logic “1” input voltage Symbol VIH Min 9.5 Typ – Max – Unit V – VIL – – 6.0 V – VOH VOL ILK IBSQ ICCQ IDDQ IIN+ IINVBSUV+ VBSUVVCCUV+ VCCUV- – – – – – – – – 7.5 7.0 7.4 7.0 – – – 55 56 0.6 20 – 8.6 8.2 8.5 8.2 1.4 0.15 50 230 340 30 40 5.0 9.7 9.4 9.6 9.4 V V µA µA µA µA µA µA V V V V Output high short circuit pulsed current IO+ 2.0 2.5 – A Output low short circuit pulsed current IO- 2.0 2.5 – A IO = 0mA IO = 20mA VB = VS = 500V/600V VIN = 0V or VDD VIN = 0V or VDD VIN = 0V or VDD VIN = VDD VIN = 0V – – – – VO = 0V, VIN = VDD, PW ≤ 10µs VO = 15V, VIN = 0V, PW ≤ 10µs Logic “0” input voltage High level output voltage, VBIAS - VO Low level output voltage, VO Offset supply leakage current Quiescent VBS supply current Quiescent VCC supply current Quiescent VDD supply current Logic “1” input bias current Logic “0” input bias current VBS supply undervoltage positive going threshold VBS supply undervoltage negative going threshold VCC supply undervoltage positive going threshold VCC supply undervoltage negative going threshold Note: Conditions 8. The VIN and IIN parameters are referenced to VSS and are applicable to all three logic input pins: HIN, LIN and SD. The VO and IO parameters are referenced to COM and are applicable to the respective output pins: HO and LO. AC Electrical Characteristics (VBIAS (VCC, VBS, VDD) = 15V, CL = 1000pF, VSS = COM, @TA = +25°C, unless otherwise specified.) Parameter Turn-on propagation delay Turn-off propagation delay Shut down propagation delay Turn-on rise time Turn-off fall time Delay matching DGD2110 Delay matching DGD2113 DGD2110/2113 Document Number DS38271 Rev. 4 - 2 Symbol tON tOFF tSD tr tf tDM tDM Min – – – – – – – 4 of 12 www.diodes.com Typ 105 94 70 15 13 – – Max 150 125 140 35 25 10 20 Unit ns ns ns ns ns ns ns Conditions VS = 0V VS = 500V/600V VS = 500V/600V – – – – February 2016 © Diodes Incorporated DGD2110/2113 Timing Waveforms DGD2110/2113 Document Number DS38271 Rev. 4 - 2 5 of 12 www.diodes.com February 2016 © Diodes Incorporated DGD2110/2113 Typical Performance Characteristics (@TA = +25°C, unless otherwise specified.) DGD2110/2113 Document Number DS38271 Rev. 4 - 2 6 of 12 www.diodes.com February 2016 © Diodes Incorporated DGD2110/2113 Typical Performance Characteristics (continued) DGD2110/2113 Document Number DS38271 Rev. 4 - 2 7 of 12 www.diodes.com February 2016 © Diodes Incorporated DGD2110/2113 Typical Performance Characteristics (cont.) DGD2110/2113 Document Number DS38271 Rev. 4 - 2 8 of 12 www.diodes.com February 2016 © Diodes Incorporated DGD2110/2113 Typical Performance Characteristics (cont.) DGD2110/2113 Document Number DS38271 Rev. 4 - 2 9 of 12 www.diodes.com February 2016 © Diodes Incorporated DGD2110/2113 Typical Performance Characteristics (cont.) DGD2110/2113 Document Number DS38271 Rev. 4 - 2 10 of 12 www.diodes.com February 2016 © Diodes Incorporated DGD2110/2113 Package Outline Dimensions Please see AP02001 at http://www.diodes.com/_files/datasheets/ap02001.pdf for the latest version. SO-16 (Type TH) Dim Min Max Typ A 2.36 2.64 -A1 0.10 0.30 -b 0.33 0.51 -c 0.229 0.318 -D 10.11 10.46 10.29 E 10.01 10.64 10.33 E1 7.42 7.59 7.52 e --1.27 h --0.48 L 0.41 1.27 -Ø -0 8 All Dimensions in mm D E E1 b ° 45 h 0.25 A Gauge Plane Seating Plane Ø A1 e L c Suggested Pad Layout Please see AP02001 at http://www.diodes.com/_files/datasheets/ap02001.pdf for the latest version. X Y Dimensions Value (in mm) C 1.27 C1 5.20 X 0.60 Y 2.20 C1 C Note: For high voltage applications, the appropriate industry sector guidelines should be considered with regards to creepage and clearance distances between device Terminals and PCB tracking. DGD2110/2113 Document Number DS38271 Rev. 4 - 2 11 of 12 www.diodes.com February 2016 © Diodes Incorporated DGD2110/2113 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2016, Diodes Incorporated www.diodes.com DGD2110/2113 Document Number DS38271 Rev. 4 - 2 12 of 12 www.diodes.com February 2016 © Diodes Incorporated