MINIA TURE FUSEHOLDERS INIATURE Holder / No. 598 Not for new designs; please refer to holder no. 831/834 PC Mount, for 5x20mm and 5x25mm Fuses Kappe eingesetzt Specifications Montage (2) Solder pins0.5 x 1.1mm Protection Class & Category IP 40 (IEC 60529) Materials Duroplastic (Phenolplast PF), black Thermoplastic (Polyamide PA 6.6), UL 94 V-0, black Copper alloy, corrosion protected solderable tinned a Holder: M8x0,75 Cap: 7,5 Metal Parts: 27±0,5 Terminals: 13±0,3 Electrical Data (23 ºC) 12±0,3 Rated Voltage: 250 V max. Current/Power: 6.3 A / 2.5 W 2 10 Operating TTemperature emperature -25 °C to 70 °C (consider de-rating) Löcher in Leiterplatte ø 1,3 +0,1 Holes in the pcb ø 1,3 +0,1 12,5 12,5 5 0,5 = Leiterplatte Printed circuit board = Stock Conditions 1,1 10 °C to 60 °C 10 Contact Resistance Holes in the Printed Circuit Board ≤ 5 mΩ Dielectric Strength 3 kV, 50Hz, 1 min., dry Insulation Resistance > 10 3 MΩ (500 V DC, 1 min.) Cap / No. 585 Solderability ø11±0,2 235 ºC, 3 sec. (Wave) 350 ºC, 1 sec. (Soldering Iron) for fuses 5 x 20 mm Soldering Heat Resistance Schlitz für Münze Breite 1,8 Slot for coin width 1,8 260 °C, 5 sec. 18,5 -0,5 Minimum Cross Section 9±0,5 ø8,4±0,1 Conduction Path - 0.2mm2 Marking 598, 250 V Unit weight Cap / No. 586 for fuses 5 x 25 mm 4,2±0,2 4,9 g (598) / 3,6 g (585) / 3,4 g (586) M8x0,75 ø11±0,2 19,5 -0,5 Schaufenster PC farblos, glasklar (für Kennmelder-Sicherung) Window PC transparent, clear (For indicator fuse) Order Information M8x0,75 4,2±0,2 9±0,5 ø8,4±0,1 Packaging Bulk (100 St.) Order Numbers Holder Cap, 5 x 20 mm Cap, 5 x 25 mm 050909 No. 598 0000 000 No. 585 0000 000 No. 586 0000 000 Note: 1.00 means the number one with two decimal places. 1,000 means the number one thousand. In our continuing strategy to deliver unparalleled circuit protection solutions, technical expertise and application leadership, we proudly introduce the WICKMANN Group and its products to the Littelfuse portfolio. WebSite www.littelfuse.com