MINIA TURE FUSEHOLDERS INIATURE Holder / No. 652 Not for new designs - refer to No. 852 and 853 PC Mount, Shocksafe 5x20mm Fuses Specifications Standard IEC 60127-6 UL 512 CSA C22.2. No.39 ∅ 12,3 Approvals 2,6 Fuse carrier inserted VDE: License No. 92599 SEMKO: Certificate Nos. 9533178/9635055 UL Recognized: File No. E 70164 CSA Certified: File No. 47574 4,3 1 3 32,6 No. 653 Vertical / 2-Pin (2) Solder pins 0.5mm x 1.1mm Protection Class & Category 10 IP 40 (with Cap 653 07 & 655 07 acc. to IEC 60529) IP 54 (with Cap 653 04 & 655 04 acc. to IEC 60529) PC2 (IEC 60127-6) 1,3 + 0,1 10 + 0,1 Printed circuit board 0,5 Mounting Materials Holder/Cap: Black Thermoplastic Polyamide PA 6.6, UL94 V-0 Sealing Washer: Silicon (Cap 653 04 & 655 04) Metal Parts: Copper alloy, corrosion protected Terminals: Solderable, tinned Holes in the printed circuit board: 1,3 + 0,1 ∅ 12,2 Cap / No. 653 Electrical Data (23ºC) Rated Voltage: Rated Current: 1 16 Rated Power: 250V 6.3A (VDE/SEMKO) 16A (UL/CSA) 2.5W (VDE/SEMKO) Operating TTemperature emperature Flush Mount TType ype Design 07: without silicon washer (IP 40) Design 04: with silicon washer (IP 54) between holder and cap -25ºC to +70ºC (consider de-rating) Climatic TTest est -25ºC/+70ºC/21 days (IEC 60068-2-1...3) Stock Conditions +10ºC to +60ºC relative humidity ≤ 75% yearly average, without dew, maximum value for 30 days - 95% Cap / No. 655 ∅ 10 Vibration Resistance 24 cycles at 15 min. each (IEC 60068-2-6) 10 - 60Hz at 0.75mm amplitude 60 - 2000Hz at 10g acceleration 1 Contact Resistance 20,4 Finger Grip TType ype Design 07: without silicon washer (IP 40) Design 04: with silicon washer (IP 54) between holder and cap ≤ 5mΩ Dielectric Strength > 1.5 kV Impulse V oltage Voltage 4 kV, 50 Hz, 1 min., dry Insulation Resistance > 10 3 MΩ (500 VDC, 1 min.) Order Information Solderability 235ºC, 3 sec. (Wave) 350ºC, 1 sec. (Soldering Iron) Packaging Bulk (100 pcs.) Order Numbers Holder Cap, Flush Mount, IP 40 Cap, Flush Mount, IP 54 Cap, Finger Grip, IP 40 Cap, Finger Grip, IP 54 Soldering Heat Resistance No. 652 0000 040 No. 653 0000 070 No. 653 0000 040 No. 655 0000 070 No. 655 0000 040 260ºC, 5 sec. (IEC 60068-2-20) Minimum Cross Section Conducting path - 0.2mm 2 Marking 652, 250V, Approvals Unit W eight Weight Specifications are subject to change without notice 3.8g (Holder) / 2.0g (653) / 2.4g (655) Note: 1.00 means the number one with two decimal places. 1,000 means the number one thousand. 050906 In our continuing strategy to deliver unparalleled circuit protection solutions, technical expertise and application leadership, we proudly introduce the WICKMANN Group and its products to the Littelfuse portfolio. WebSite www.littelfuse.com