DT7550C-EU DUAL TEC® Motion Sensor with anti-mask technology Designed for high security commercial installations where masking is a concern, Honeywell’s DUAL TEC® DT7550C-EU Motion Sensor combines DualCore™ signal processing with MaskAlert™ anti-mask technology to ensure superior performance. Features l Superior Anti-mask Protection adaptive microwave threshold, adaptive PCB circuitry and temperature Through a combination of PIR and baselines, and bi-directional temperature compensation circuitry. microwave signal processing, MaskAlert compensation. technology quickly detects intentional l l DualCore Signal Processing Superb Detection Through K-Band PIR and microwave signals are and accidental masks or blocks. The Technology analyzed in the microcontroller in sensor sends a trouble signal whenever K-Band microwave technology delivers multiple domains, including amplitude, it encounters mask conditions. Power- sharp detection without holes or weak time, frequency and duration to up anti-mask detects mask conditions spots. The custom made source offers provide superior false alarm immunity at start-up to reduce sensor security pattern shaping to fill the protected area without compromising detection. breaches during installation, servicing, with a broad, balloon-shaped pattern DualCore processing not only supports and power outages. which matches the PIR pattern. It also alarm functions, but also advanced Advanced DualCore Signal offers pattern containment to reduce the temperature compensation, diagnostics, Processing penetration of microwave energy through and false alarm features. DualCore signal processing analyzes walls. PIR and microwave signals through l l Uniform Sensitivity Optics Self-Testing for Consistently Reliable The custom-designed Fresnel lens the DT7550C-EU’s microcontroller. Operation provides the same sensitivity for human DualCore processing supports a Concurrent diagnostics assure optimum targets at the edge of the pattern as multitude of advanced functions, performance and reliability. Self-testing is exists directly in front of the sensor, including concurrent diagnostics, digital performed upon power-up and at least giving the DT7550C-EU consistent fluorescent light interference filter, digital once every hour on the PIR, microwave, coverage throughout the protected area. l DT7550C-EU DUAL TEC® Motion Sensor with anti-mask technology Detection patterns: Specifications Range 15m x 18m Alarm Relay Energized Form C 125mA, 25V dc, 20 Ohm series resistor Mounting Height 2.3m optimal Trouble Relay De-energized Form B (NC 125mA, 25V dc Tamper (NC) 50mA, 24V dc Power Requirements 7.5 –16V dc – 30mA typ., 40mA max. at 12V dc l Top View AC Ripple: 3V peak-to-peak at 12V dc nominal Frequencies 24.125GHz (K-Band) PIR White Light Immunity 6,500 Lux typical RFI Immunity 30V/m, 10MHz – 1000MHz Operating Temperature -10º to 55ºC 5% – 95% relative humidity (non-condensing) Self-Test Intervals 15m Microwave Supervision: Continuous PIR Self-Test: Once every hour Temperature Compensation: Every 30 seconds PIR Fields of View 22 long range, 12 intermediate, 6 lower, 4 look-down Dimensions 11.9 cm x 7.1 cm x 4.2cm Sensitivity Low (Pulse Count 2): 3-4 steps l Side View High (Pulse Count 1): 2-3 steps Temperature Advanced Dual Slope Temperature Compensation Compensation Ordering: Accessories: DT7550C-EU SMB10 DUAL TEC Motion Sensor with anti-mask Universal White Swivel Mount Bracket (5 pack) technology SMB10C Universal White Ceiling Mount Bracket (5 pack) SMB10T Tampered Universal White Swivel Mount Bracket (5 pack) Find out more: Fax : +31 (0) 299-410201 www.honeywell.com/security/nl Honeywell Security & Data Collection Ampèrestraat 41 1446 TR Purmerend The Netherlands Tel : +31 (0) 299-410200 www.honeywell.com HSC-DT7550CEU-03-ENX(0609)DS-C June 2009 © 2009 Honeywell International Inc. 14m 15m