HCD5WIHX EQUIP® SERIES WIDE DYNAMIC 720P TRUE DAY/NIGHT NETWORK BOX CAMERA Honeywell’s latest addition to the EQUIP® Series of IP-based products, the HCD5WIHX is a high definition Wide Dynamic, True Day/Night network camera that offers the latest in digital video surveillance. The HCD5WIHX provides 720p resolution at full frame rate. Progressive scan technology and 2D edge enhancement provide outstanding clarity and definition. Digital Noise Reduction results in significant storage savings without sacrificing image quality in low light. The 1/3 progressive scan CMOS sensor offers the latest in digital video surveillance technology with accurate colour rendition through a wide variety of lighting conditions. The HCD5WIHX supports the PSIA specification for interoperability between network video products. The HCD5WIHX true day/night camera adapts to varying lighting conditions to ensure the highest picture quality even in extreme low light conditions. When the light level drops too low for accurate video identification in colour, the camera moves the IR cut filter out of the optical path and then switches to black and white video to capture more detail using the increased sensitivity of the CMOS sensor to IR light. In high contrast lighting conditions, the HCD5WIHX delivers higher quality images and significantly better dynamic range (>100 dB) than conventional IP cameras. Designed for environments with difficult lighting, the HCD5WIHX camera offers a unique solution to capture the whole picture regardless of lighting condition or application. (Lens sold separately) Setup is quick and easy and can be customised through a web client or from an NVR. The web client also allows fine tuning of the camera and auto iris levels. This can also be performed from most DVR/NVR setup utilities. The HCD5WIHX supports dual video streams and multiple compression formats with rates up to 30 frames per second (25 fps for PAL systems). The digital compression parameters for the two video steams are independently configurable. The HCD5WIHX features analogue video out for aiming and focusing. The HCD5WIHX has built-in Power over Ethernet (IEEE 802.3af), which allows power to be supplied to the camera using standard network cabling, eliminating the need for a separate power supply and associated wiring. In retrofit situations where PoE is not available, the unit can also be powered directly from 24 V AC. Market Opportunities The HCD5WIHX is a network surveillance solution designed for object recognition that is required in locations where variable and low light conditions exist. This provides optimum performance for both indoor and outdoor applications. Features • Outstanding image quality, 720p (1280 × 720) resolution • 30 fps (25 fps PAL) progressive scan • H.264 and MJPEG compression • PSIA support • Camera tamper detection • Dynamic Range: 115dB • Supports both dynamic and static IP addresses • Variable day/night threshold setting to accommodate switching to black and white images in low light • Dual digital video streams simultaneously, independently configurable • Remote firmware update • Includes advanced IP locator software to make system setup easy • Web server for remote setup of camera video and network parameters • Choice of 24 V AC or PoE IEEE 802.3af power inputs • Multiple levels of password protected remote access prevents unauthorised users from altering system settings • Supports bidirectional audio HCD5WIHX SPECIFICATIONS Like all cameras in the EQUIP IP Series, the HCD5WIHX network camera uses Honeywell technology for camera video motion detection, tamper detection, remote firmware updating and for secure storage of all camera settings. Video motion detection recognises object motion within the field of view, then a simple on-screen notification alerts the user. Camera tamper detection notifies the user when a camera’s field of view is altered, blinded or blurred. This ensures the video’s integrity and alerts the customer to either a live event or a system problem that is causing disruption to the video stream. Honeywell’s technology also allows users to remotely upload firmware to the camera. The built-in web server provides password-protected access to the camera’s video and network setup. SYSTEM DIAGRAM Hybrid DVR Monitor NETWORK Analogue out NVR Keyboard EQUIP® Series Cameras Performance Series Cameras Monitor Monitor HCD5WIHX SPECIFICATIONS Environmental Operational Video Standard PAL Temperature Operating: -10°C to 50°C Storage: -20°C to 60°C Scanning System Progressive scan Relative Humidity 0% to 85%, non-condensing Image Sensor 1/3 CMOS Number of Pixels (H × V) 1280 x 720 Video Compression Dual stream H.264 and MJPEG Minimum Illumination 0.1 lux colour/0.07 lux BW @ 50 IRE, F1.2 Automatic Lens Control DC Iris Level 1-25 Video Output (AUX) 1.0 V p-p @ 75 ohms Primary Stream Resolution 1280 x 720 800 x 450 640 x 360 320 x 180 Bitrate H.264 (Typical)* 2.7 Mbps 1.8 Mbps 0.9 Mbps 0.315 Mbps Dynamic Range 115 dB Up to 30/25 fps video in all resolutions S/N Ratio 50 dB or more (AGC off) Frame Rate NTSC/PAL Auto Gain Control Off/On, selectable (20-40 dB) Video Streaming Dual streaming: H.264 and MJPEG Controllable frame rate and bandwidth Constant or variable bit rate Automatic Electronic Shutter 1/30-1/87,000 sec (NTSC and PAL) Security Multiple user access levels with password protection White Balance Auto, Manual, WBC Push Audio/Two-Way Line in/out Video Access from Web Browser Full control of all camera settings available to administrator Minimum Web Browsing Requirements Pentium IV CPU 3.1 GHz or faster 2 GB RAM Windows XP®, Windows 7 (32/64), Windows 2K8 (64) Internet Explorer 6, 7, 8 or 9 Installation and Management Maintenance Honeywell IP Utility software identifies the IP address, discovers cameras, supports firmware upgrades Supported Protocols HTTP, TCP, RTSP, RTP, UDP, ARP, DNS, RTCP, FTP, ICMP, DHCP, Bonjour, IGMP, Telnet PSIA support IP Specifications Electrical Input Voltage 24 V AC, PoE IEEE 802.3af Input Range 17–28 VAC Surge Suppression 1.5 kW transient Power Consumption 5.0 W (max) 24 V AC PoE: PD Type 1 Class 2 Mechanical Frame Rate 30/25 30/25 30/25 30/25 Dimensions (W x H x D) See Diagram Standards Weight 0.5 kg camera only Regulatory Construction Housing: Aluminium Finish: Cool Grey Powder Coat Emissions FCC, CE (EN55022) Camera Mount 1/4-20 UNC mounting ring Immunity CE (EN50130-4) Safety EU: EN60950-1:2006 Connector Video Output: BNC connector Lens: 4 Pin Connector Power Input: Removable screw block Network: RJ45 connector Alarm I/O: Removable screw block Audio In: 3.5 mm mono phone jack Audio Out: 3.5 mm mono phone jack Storage/Day (GB) 28.48 18.98 9.49 3.32 *Actual bitrate is scene and motion dependent with H.264 stream. HCD5WIHX SPECIFICATIONS System Integration Accessories Open IP Integration Housing and Mounts PSIA support and open API for real interoperability between Honeywell and other manufacturer’s IP-enabled security devices. Refer to the Honeywell Open Technology Alliance [http://www.security.honeywell.com/hota/] to learn more about our open and integrated solutions. HBC5WT Wall/ceiling mount bracket Recommended Lens Options * HLM45V13MPD 4.5-13.2 mm high definition megapixel lens NOTE: * Only a high definition megapixel lens should be used with the HCD5WIHX camera. 135.6 mm 62.0 mm 62.0 mm 22.1 mm 20.6 mm Ordering HCD5WIHX Network True Day/Night, 1/3" Progressive Scan, CMOS, Wide Dynamic 720p Resolution Camera, 24 V AC or PoE IEEE 802.3af, H.264, PAL NOTE: Honeywell reserves the right, without notification, to make changes in product design or specifications. For additional information, please visit www.honeywell.com/security/uk Honeywell Security Group Aston Fields Road Whitehouse Industrial Estate Runcorn Cheshire WA7 3DL Tel: 08448 000 235 www.honeywell.com HVS-HCD5WIH-01-UK(0212)DS-E February 2012 © 2012 Honeywell International Inc.