X

HCD5WIHX
EQUIP® SERIES WIDE DYNAMIC 720P TRUE DAY/NIGHT
NETWORK BOX CAMERA
Honeywell’s latest addition to the EQUIP® Series of IP-based products, the HCD5WIHX is a high
definition Wide Dynamic, True Day/Night network camera that offers the latest in digital video
surveillance. The HCD5WIHX provides 720p resolution at full frame rate. Progressive scan technology
and 2D edge enhancement provide outstanding clarity and definition. Digital Noise Reduction results in
significant storage savings without sacrificing image quality in low light. The 1/3 progressive scan
CMOS sensor offers the latest in digital video surveillance technology with accurate colour rendition
through a wide variety of lighting conditions. The HCD5WIHX supports the PSIA specification for
interoperability between network video products.
The HCD5WIHX true day/night camera adapts to varying lighting conditions to ensure the highest
picture quality even in extreme low light conditions. When the light level drops too low for accurate
video identification in colour, the camera moves the IR cut filter out of the optical path and then
switches to black and white video to capture more detail using the increased sensitivity of the CMOS
sensor to IR light. In high contrast lighting conditions, the HCD5WIHX delivers higher quality images
and significantly better dynamic range (>100 dB) than conventional IP cameras. Designed for
environments with difficult lighting, the HCD5WIHX camera offers a unique solution to capture the
whole picture regardless of lighting condition or application.
(Lens sold separately)
Setup is quick and easy and can be customised through a web client or from an NVR. The web client
also allows fine tuning of the camera and auto iris levels. This can also be performed from most
DVR/NVR setup utilities.
The HCD5WIHX supports dual video streams and multiple compression formats with rates up to 30 frames
per second (25 fps for PAL systems). The digital compression parameters for the two video steams are
independently configurable. The HCD5WIHX features analogue video out for aiming and focusing.
The HCD5WIHX has built-in Power over Ethernet (IEEE 802.3af), which allows power to be supplied to
the camera using standard network cabling, eliminating the need for a separate power supply and
associated wiring. In retrofit situations where PoE is not available, the unit can also be powered directly
from 24 V AC.
Market Opportunities
The HCD5WIHX is a network surveillance solution designed for object recognition that is required in
locations where variable and low light conditions exist. This provides optimum performance for both
indoor and outdoor applications.
Features
• Outstanding image quality, 720p
(1280 × 720) resolution
• 30 fps (25 fps PAL) progressive scan
• H.264 and MJPEG compression
• PSIA support
• Camera tamper detection
• Dynamic Range: 115dB
• Supports both dynamic and static
IP addresses
• Variable day/night threshold setting to
accommodate switching to black and
white images in low light
• Dual digital video streams
simultaneously, independently
configurable
• Remote firmware update
• Includes advanced IP locator software
to make system setup easy
• Web server for remote setup of camera
video and network parameters
• Choice of 24 V AC or PoE IEEE 802.3af
power inputs
• Multiple levels of password protected
remote access prevents unauthorised
users from altering system settings
• Supports bidirectional audio
HCD5WIHX
SPECIFICATIONS
Like all cameras in the EQUIP IP Series, the HCD5WIHX network camera uses Honeywell technology for camera video motion detection,
tamper detection, remote firmware updating and for secure storage of all camera settings. Video motion detection recognises object motion
within the field of view, then a simple on-screen notification alerts the user. Camera tamper detection notifies the user when a camera’s field of
view is altered, blinded or blurred. This ensures the video’s integrity and alerts the customer to either a live event or a system problem that is
causing disruption to the video stream. Honeywell’s technology also allows users to remotely upload firmware to the camera. The built-in web
server provides password-protected access to the camera’s video and network setup.
SYSTEM DIAGRAM
Hybrid DVR
Monitor
NETWORK
Analogue out
NVR
Keyboard
EQUIP® Series
Cameras
Performance Series
Cameras
Monitor
Monitor
HCD5WIHX
SPECIFICATIONS
Environmental
Operational
Video Standard
NTSC, PAL
Temperature
Operating: -10°C to 50°C
Storage: -20°C to 60°C
Scanning
System
Progressive scan
Relative
Humidity
0% to 85%, non-condensing
Image Sensor
1/3 CMOS
Number of Pixels
(H × V)
1280 x 720
Video
Compression
Dual stream H.264 and MJPEG
Minimum
Illumination
0.1 lux colour/0.07 lux BW @ 50 IRE, F1.2
Automatic Lens
Control
DC Iris Level 1-25
Video Output (AUX)
1.0 V p-p @ 75 ohms
Primary Stream
Resolution
1280 x 720
800 x 450
640 x 360
320 x 180
Bitrate H.264
(Typical)*
2.7 Mbps
1.8 Mbps
0.9 Mbps
0.315 Mbps
Dynamic Range
115 dB
Up to 30/25 fps video in all resolutions
S/N Ratio
50 dB or more (AGC off)
Frame Rate
NTSC/PAL
Auto Gain
Control
Off/On, selectable (20-40 dB)
Video
Streaming
Dual streaming: H.264 and MJPEG
Controllable frame rate and bandwidth
Constant or variable bit rate
Automatic
Electronic Shutter
1/30-1/87,000 sec (NTSC and PAL)
Security
Multiple user access levels with password
protection
White Balance
Auto, Manual, WBC Push
Audio/Two-Way
Line in/out
Video Access
from Web
Browser
Full control of all camera settings available
to administrator
Minimum
Web
Browsing
Requirements
Pentium IV CPU 3.1 GHz or faster
2 GB RAM Windows XP®,
Windows 7 (32/64),
Windows 2K8 (64)
Internet Explorer 6, 7, 8 or 9
Installation and
Management
Maintenance
Honeywell IP Utility software identifies the
IP address, discovers cameras, supports
firmware upgrades
Supported
Protocols
HTTP, TCP, RTSP, RTP, UDP, ARP,
DNS, RTCP, FTP, ICMP, DHCP, Bonjour,
IGMP, Telnet
PSIA support
IP Specifications
Electrical
Input Voltage
24 V AC, PoE IEEE 802.3af
Input Range
17–28 VAC
Surge
Suppression
1.5 kW transient
Power
Consumption
5.0 W (max) 24 V AC
PoE: PD Type 1 Class 2
Mechanical
Frame
Rate
30/25
30/25
30/25
30/25
Dimensions
(W x H x D)
See Diagram
Standards
Weight
0.5 kg camera only
Regulatory
Construction
Housing: Aluminium
Finish: Cool Grey Powder Coat
Emissions
FCC, CE (EN55022)
Camera Mount
1/4-20 UNC mounting ring
Immunity
CE (EN50130-4)
Safety
EU: EN60950-1:2006
Connector
Video Output: BNC connector
Lens: 4 Pin Connector
Power Input: Removable screw block
Network: RJ45 connector
Alarm I/O: Removable screw block
Audio In: 3.5 mm mono phone jack
Audio Out: 3.5 mm mono phone jack
Storage/Day
(GB)
28.48
18.98
9.49
3.32
*Actual bitrate is scene and motion dependent with H.264 stream.
HCD5WIHX
SPECIFICATIONS
System Integration
Accessories
Open IP Integration
Housing and Mounts
PSIA support and open API for real interoperability between Honeywell
and other manufacturer’s IP-enabled security devices. Refer to the
Honeywell Open Technology Alliance
[http://www.security.honeywell.com/hota/] to learn more about our
open and integrated solutions.
HBC5WT
Wall/ceiling mount bracket
Recommended Lens Options *
HLM45V13MPD
4.5-13.2 mm high definition megapixel lens
NOTE:
* Only a high definition megapixel lens should be used with the HCD5WIHX
camera.
135.6 mm
62.0 mm
62.0 mm
22.1 mm
20.6 mm
Ordering
HCD5WIHX
Network True Day/Night, 1/3" Progressive Scan, CMOS, Wide Dynamic 720p Resolution Camera,
24 V AC or PoE IEEE 802.3af, H.264, PAL
HCD5WIH
Network True Day/Night, 1/3" Progressive Scan, CMOS, Wide Dynamic 720p Resolution Camera, 24 V AC or PoE
IEEE 802.3af, H.264, NTSC
NOTE: Honeywell reserves the right, without notification, to make changes in product design or specifications.
For additional information,
please visit www.honeywell.com/security/me
Honeywell Security Group
LOB Building 08, Office 199
P.O.Box 18530, Jebel Ali
Dubai
United Arab Emirates (UAE)
Tel: +971-4-8073200
www.honeywell.com
HVS-HCD5WIH-01-ME(0212)DS-E
February 2012
© 2012 Honeywell International Inc.