E-Snap® Product Description Edge-Mount PCB Connectors Winchester’s Bomar brand E-Snap® Edge-Mount PCB Connectors are available in a wide range of interfaces including HHD BNC, BNC, SMA, SMB, MCX, and MMCX. Unlike other Edge-Mount PCB Connectors, E-Snap® Connectors can be snapped onto the PCB and held securely in place prior to soldering. E-Snap® Connectors feature four circular raised detents pressed into the mounting legs that snap into mounting holes on the PCB. Once soldered onto the PCB, E-Snap® Connectors provide excellent strain relief to solder joints during connector mating cycles. E-Snap® Edge-Mount PCB Connectors provide superior RF performance compared to standard right-angle connectors and can be used in a wide range of applications including Broadcast, Telecommunications, Test and Measurement, Security, and Medical. • E-Snap® Edge-Mount PCB Connectors are simple to install. Align the connector with the solder pads on the PCB and press the connector onto the board until it snaps into place. • E-Snap® Edge-Mount PCB Connectors feature 4 circular raised detents pressed into the top and bottom mounting legs that snap into mounting holes on the PCB; holding the connector securely in place prior to soldering. • E-Snap® Edge-Mount PCB Connectors provide superior RF performance versus traditional right-angle connectors, as the straight signal contact provides an optimum transmission path. CONNECTING INNOVATION TO APPLICATION® Specifications Electrical Material Impedance: Frequency Range: Working Voltage: Insulation Resistance: VSWR: 50Ω / 75Ω Ohms Consult Connector Series 500 VRMS at Sea Level 5000 Megohms Min Consult Connector Series Contact Finish: RoHS Compliant: Environmental Temperature Range: Photo 1 Insulator Material: Body Material: Body Finish: Contact Material: PTFE Brass Nickel or Gold Male – Brass Female – Beryllium Copper Gold Yes - 40˚ C to +165˚ C Photo 2 Photo 3 Photo 4 Photo 5 Bomar Part Number Description PCB Thickness Impedance Drawing Number Photo HHD361EHD704 E-Snap® Edge-Mount, HHD BNC, Jack 0.062” 75 Ohm SSDHHD361EHD70 1 361ES504EFT E-Snap® Edge-Mount, BNC, Jack 0.062” 50 Ohm SD361ES504EFT 2 361ESV504EFT E-Snap® Edge-Mount, BNC, Jack, Vertical 0.062” 50 Ohm SD361ESV504EFT Not Shown 361ES704EFT E-Snap® Edge-Mount, BNC, Jack 0.062” 75 Ohm SD361ES704EFT 2 361ESV704EFT E-Snap® Edge-Mount, BNC, Jack, Vertical 0.062” 75 Ohm SD361ESV704EFT Not Shown 961E504 E-Snap® Edge-Mount, SMA, Jack 0.062” 50 Ohm SD961E504 3 961E504HF E-Snap® Edge-Mount, SMA, Jack (26.5 GHz) 0.062” 50 Ohm SD961E504HF 3 962E504 E-Snap® Edge-Mount, SMA, Plug 0.062” 50 Ohm SD962E504 4 1061E504 E-Snap® Edge-Mount, SMB, Jack 0.047” 50 Ohm SD1061E504 Not Shown 1261E504 E-Snap® Edge-Mount, MCX, Jack 0.062” 50 Ohm SD1261E504 5 1261E504L E-Snap® Edge-Mount, MCX, Jack, Low-Profile 0.062” 50 Ohm SD1261E504L 5 1361E504 E-Snap® Edge-Mount, MMCX, Jack 0.062” 50 Ohm SD1361E504 Not Shown Part Numbers Winchester Electronics 199 Park Road Extension, Suite 104 Middlebury, Connecticut 06762 203.741.5400 Phone 203.741.5500 Fax www.winchesterelectronics.com January, 2014