WVB Series Product Description 75 Ohm BNC PCB Connectors WVB Series 75 Ohm BNC PCB Jacks are available in a variety of Vertical, RightAngle and Edge Mount designs for solder termination to printed circuit boards. WVB Series 75 Ohm BNC PCB Jacks mate with our industry-proven KINGS® 2065 Series Standard BNC and 2065 Series Long Barrel BNC Plugs and can be used in a wide range of applications including Broadcast Routers, Networking, Instrumentation, and Medical Equipment. WVB Series 75 Ohm BNC Bulkhead Jacks for panel mount applications are available in two styles – isolated ground or with a grounding ring. • BNC Right-Angle PCB Jacks are available in bulkhead and extended–nose right-angle configurations. BNC bodies are die cast with nickel plating. Center contacts are precision machined and gold plated. • BNC Vertical PCB Jacks are available in bulkhead and straight configurations offered in 3 different height profiles. BNC bodies are nickel plated machined brass or die cast. Center contacts are precision machined and gold plated. • BNC Edge Mount PCB Jacks are designed for 0.62 inch thick PCB and have a gold plated machined brass body with a precision machined gold plated center contact. CONNECTING INNOVATION TO APPLICATION® Specifications Electrical Material Impedance: Frequency Range: Working Voltage: Dielectric Withstanding Voltage: VSWR: 75 Ohms 0 - 4 GHz ≥ 500 VRMS Body & Outer Contact: Insulator: Insulation Resistance: Insertion Loss: 1500 VRMS at sea level Straight: 1.15 Max Right Angle: 1.2 Max Center Contact: ≤ 1.5 Milliohms Outer Contact: ≤ 0.2 Milliohms 5000 Milliohms 0.2 dB Max Brass or Die Cast, Nickel Plated Phosphor Bronze, Gold Plated Delrin® or PTFE Mechanical Center Contact Retention: Engagement Force: Disengagement Force: Durability: ≥ 6 lbs. ≤ 5 lbs. ≥ 1.5 lbs. 500 Cycles Min Environmental Temperature Range: - 65˚ C to + 165˚ C Contact Resistance: Female Contact: Part Numbers Part Number Description Solder Tail Length (in.) Body Material Insulation Material WVB-7-701G BNC Edge Mount Jack – Brass Gold Plated PTFE WVB-7-705N BNC Vertical PCB Jack .131 Die Cast Nickel Plated Delrin® WVB-7-703N BNC Vertical PCB Jack .177 Brass Nickel Plated PTFE WVB-7-702N BNC Vertical PCB Jack .177 Brass Nickel Plated Delrin® WVB-7-704N BNC Vertical PCB Bulkhead Receptacle .177 Brass Nickel Plated PTFE WVB-7-B02N BNC Right-Angle Bulkhead PCB Jack .131 Die Cast Nickel Plated PTFE WBV-7-B01N BNC Right-Angle PCB Jack .131 Die Cast Nickel Plated Delrin® WVB-7-202N BNC Bulkhead Jack Solder Cup – Die Cast Nickel Plated Delrin® WVB-7-201N BNC Bulkhead Jack Solder Cup Isolated – Brass Nickel Plated Nylon Winchester Electronics 199 Park Road Extension, Suite 104 Middlebury, Connecticut 06762 203.741.5400 Phone 203.741.5500 Fax www.winchesterelectronics.com April 2013