® H N I N T E R FA C E .403 MIN FULL THD .590 MIN .100 MIN .087 .077 .138 MIN .058 MAX Ø.755 MAX WHEN NUT BIASED IN FORWARD DIRECTION Ø.268 MAX .359 MIN Ø.294 MAX Ø.263 MIN SEE NOTE 1 .553 Ø .548 .683 Ø .662 Ø.760 MIN Ø.925 MAX .578 Ø .571 Ø.430 MAX Ø.289 MIN .750-20UNEF-2A .005 MIN .750-20UNEF-2B .120 MIN .388 .358 .68 Ø .62 .355 MIN .368 MAX .368 MIN REFERENCE PLANE .015 MAX FLAT OR RADIUS SHAPE OF TIP OPTIONAL Ø.132 MAX .005 MAX .358 .328 REF PLANE Ø.132 MAX Note 1. The ID of contact fingers when inserted into Ø.548 ID Max test ring shall be Ø.432 Min ELECTRICAL ENVIRONMENTAL Nominal Impedance Frequency Range Voltage Rating Dielectric Withstanding Voltage Insulation Resistance VSWR 50 ohms DC to 4 GHz 1,500 volts rms 5,000 volts rms 5,000 megohms 1.35 max DC - 7 GHz MECHANICAL Mating Characteristics Connector Durability Cable Attachement Temperature Range Vibration Shock Moisture Resistance Corrosion (salt spray) -85°Fto +329°F (-65°C to +165°C) MIL-STD-202 Method 204 (Test Cond. B) MIL-STD-202 Method 213 (Test Cond. I) MIL-STD-202 Method 106 MIL-STD-202 Method 101 Test Cond. B) per MIL-C-3643 500 cycles min. Clamp MATERIALS / FINISHES Body Contacts (Inner) Contacts (Outer) Contacts (Slotted) Insulators Gaskets & Seals Brass, Silver or Nickel Plated Female: Beryllium Copper, Silver or Gold Plated Male: Brass, Silver or Gold Plated Brass, Silver or Nickel Plated Beryllium, Silver or Nickel Plated PTFE or Rexolite Silicone Rubber TRU Corporation 245 Lynnfield Street, Peabody, MA 01960 1-800-COAX-TRU (1-800-262-9878) www.trucorporation.com