B N C I N T E R FA C E - D R A F T D SEALING GASKET TO MEET REQUIRED FUNCTIONAL AND ENVIRONMENTAL PERFORMANCE .230 .210. .228 .208 .414 MIN. SEE NOTE .208 .188 .206 .186 REF. PLANE .006 MIN CHAMFER OR RADIUS Ø .190 SEE MIN NOTE 1 Ø .322 MAX Ø .382 Ø .333 .378 .327 Ø .256 Ø .186 Ø .321 MAX MAX .436 .356 .319 Ø Ø .432 .346 Ø .390 .385 .030 .015 .003 MIN .097 .091 .097 .091 15°0' ±0°30' Ø .054 .052 180° ±1° .473 .463 66° 55° Ø .081 .075 .208 .204 .124 MIN .006 MAX .335 .327 Ø .025 MAX Ø .087 .081 .184 .180 REF. PLANE Ø .087 .081 4° Ø .078 MIN 1° .195 MIN .022 .018 NOTES: 1. FLARED TO MEET GUAGE TEST. 2. CLEARANCE FOR THE MATING CONNECTOR COUPLING NUT ELECTRICAL Nominal Impedance: Frequency Range: Voltage Rating: Dielectric Withstanding Voltage: Insulation Resistance: VSWR: Intermodulation: ENVIRONMENTAL 50 ohms DC to 7 GHz 2,700 volts rms 4,000 volts rms 10,000 megohms 1.30 max DC-7 GHz -155 dBc Temperature Range: Vibration: Shock: Moisture Resistance: Corrosion (salt spray): MECHANICAL Mating Characteristics Connector Durability: Cable Attachement: -85°Fto +329°F (-65°C to +165°C) MIL-STD-202 Method 204 (Test Cond. B) MIL-STD-202 Method 213 (Test Cond. I) MIL-STD-202 Method 106 MIL-STD-202 Method 101 Test Cond. B) per IEC 169-4 or DIN 47223 as applicable 500 cycles min. Clamp MATERIALS / FINISHES: Body: Contacts (Inner): Contacts (Outer): Contacts (Slotted): Insulators: Gaskets & Seals: Brass, Silver or Nickel Plated Female: Beryllium Copper, Silver or Gold Plated. Male: Brass, Silver or Gold Plated Brass, Silver or Nickel Plated Beryllium, Silver or Nickel Plated Teflon Silicone Rubber TRU Corporation 245 Lynnfield Street, Peabody, MA 01960 1-800-COAX-TRU (1-800-262-9878) www.trucorporation.com