Q R M ™ I N T E R FA C E Ø 1.250 .172 Ø .830 NOTE1 MATING REFERENCE PLANE Note 1. Flared to meet Gage Test with .624 ring. ELECTRICAL Nominal Impedance: Frequency Range: Voltage Rating: Dielectric Withstanding Voltage: Insulation Resistance: VSWR: Intermodulation: ENVIRONMENTAL 50 ohms DC to 1 GHz 3,500 volts rms 4,000 volts rms 10,000 megohms 1.30 max DC-7 GHz -155 dBc Temperature Range: Vibration: Shock: Moisture Resistance: Corrosion (salt spray): MECHANICAL Mating Characteristics Connector Durability: Cable Attachement: -85°Fto +329°F (-65°C to +165°C) MIL-STD-202 Method 204 (Test Cond. B) MIL-STD-202 Method 213 (Test Cond. I) MIL-STD-202 Method 106 MIL-STD-202 Method 101 Test Cond. B) per TRU standards 500 cycles min. Clamp MATERIALS / FINISHES: Body: Contacts (Inner): Contacts (Outer): Contacts (Slotted): Insulators: Gaskets & Seals: Brass, Silver or Nickel Plated Female: Beryllium Copper, Silver or Gold Plated. Male: Brass, Silver or Gold Plated Brass, Silver or Nickel Plated Beryllium, Silver or Nickel Plated Teflon Silicone Rubber TRU Corporation 245 Lynnfield Street, Peabody, MA 01960 1-800-COAX-TRU (1-800-262-9878) www.trucorporation.com