5000W Transient Voltage Suppressor 5KP-HF Series Breakdown Voltage: 6.8 to 440 Volts Peak Pulse Power: 5000 Watts RoHS Device Halogen Free R-6 Features 0.052(1.32) DIA. 0.048(1.22) - Glass passivated chip. - 5000W peak pulse power capability with a 10/1000µs waveform, repetitive rate (duty cycle):0.01% 1.0(25.4) MIN. - Low leakage. - Uni and Bidirectional unit. - Excellent clamping capability. 0.360(9.14) 0.340(8.64) - Very fast response time. - UL recognized file # E349157 - Range: 5KP5.0(C)A thru. 5KP190(C)A R 0.360(9.14) DIA. 0.340(8.64) 5KP5.0(C)A-HF Mechanical Data 1.0(25.4) MIN. -Case: Molded plastic. -Epoxy: UL 94V-0 rate flame retardant -Lead: Solderable per MIL-STD-202, method 208 guranteed. Dimensions in inches and (millimeter) -Polarity: Color band denotes cathode end except Bipolar. -Mounting position: Any Maximum Ratings and Electrical Characteristics Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive loaded. For capacitive load, derated current by 20%. Symbol Value Unit Peak power dissipation with a 10/1000μs waveform (Note 1) PPP 5000 W Peak pulse current with a 10/1000μs waveform (Note 1) IPP See Next Table A Power dissipation on infinite heatsink at TL=75°C PD 8.0 W Peak forward surge current, 8.3ms single half sine-wave unidirectional only (Note 2) IFSM 500 A Maximum instantaneous forward voltage at 100A for uni-directional devices only (Note 3) VF 3.5 / 5.0 V Operating junction and storage temperature range TJ, TSTG -55 to +150 °C Parameter NTOES: (1) Non-repetitive current pulse, per fig.5 and derated above TA=25°C per fig.1 (2) Measured on 8.3 ms single half sine wave of equivalent square wave, duty cycle=4 pulses per minute maximum. (3) VF<3.5V for devices of VBR<200V and VF<5.0V for devices of VBR>201V Company reserves the right to improve product design , functions and reliability without notice. REV:C Page 1 QW-JTV03 Comchip Technology CO., LTD. 5000W Transient Voltage Suppressor RATING AND CHARACTERISTIC (5KP-HF Series) Fig.2 - Maximum Non-Repetitive Surge Current Fig.1 - Pulse Derating Curve 500 Peak Forward Surge Current, (A) Peak Pulse Derating in Percentage of Peak Power or Current, (%) 100 75 50 25 0 400 350 300 250 200 0 25 50 75 100 125 TJ = TJ Max 8.3ms Single Half Sine-Wave 450 150 175 200 1 10 Ambient Temperature, TA (°C) Number of Cycle at 60 HZ Fig.3 - Steady State Power Derating Curve Fig.4- Peak Pulse Power Rating Curve 100 6 Peak Power, (Kw) Steady State Power Dissipation, (W) 8 4 10 1 2 0 0 25 50 75 0.1 0.1 100 125 150 175 200 10 100 1000 10000 Pulse Width, td (μs) Fig.5 - Pulse Waveform Fig.6 - Typical Junction Capacitance 100000 100 Junction Capacitance ,CJ (PF) TJ = 25°C Pulse width (td) is defined as the point where the peak current decays to 50% of IPP Tr = 10μs Peak value IPP 75 Half value = IPP/2 50 10/1000μs. Waveform as defined by R.E.A. 25 Bi-directional @zero bias Uni-directional @zero bias 10000 1000 Uni-directional @VRWM 100 Bi-directional @ VRWM 10 TJ=25°C f=1.0MHz td 0 1 Lead Temperature,TL (°C) 125 Peak Pulse Current, (%) 100 0 1 2 3 4 1 1 Time, (ms) 10 100 1000 Breakdown Voltage, VBR (V) Company reserves the right to improve product design , functions and reliability without notice. REV:C Page 2 QW-JTV03 Comchip Technology CO., LTD. 5000W Transient Voltage Suppressor Electrical Characteristics (5KP-HF Series) Breakdown voltage VBR @ IT Part No. Min. (V) Max. (V) IT (mA) Maximum Reverse Leakage @VRWM Working Peak Reverse Voltage Maximum Reverse Surge Current Maximum Clamping Voltage @IPP IR (uA) VRWM (V) IPP (A) VC (V) UNI BI Marking Code 5KP5.0(C)A-HF 6.40 7.00 50 5000 5.0 543.48 9.2 5KP5.0A 5KP5.0CA 5KP6.0(C)A-HF 6.67 7.37 50 5000 6.0 485.44 10.3 5KP6.0A 5KP6.0CA 5KP6.5(C)A-HF 7.22 7.98 50 2000 7.0 446.43 11.2 5KP6.5A 5KP6.5CA 5KP7.0(C)A-HF 7.78 8.60 50 1000 7.0 416.67 12.0 5KP7.0A 5KP7.0CA 5KP7.5(C)A-HF 8.33 9.21 5 250 8.0 387.60 12.9 5KP7.5A 5KP7.5CA 5KP8.0(C)A-HF 8.89 9.83 5 150 8.0 367.65 13.6 5KP8.0A 5KP8.0CA 5KP8.5(C)A-HF 9.44 10.40 5 50 9.0 347.22 14.4 5KP8.5A 5KP8.5CA 5KP9.0(C)A-HF 10.00 11.10 5 20 9.0 324.68 15.4 5KP9.0A 5KP9.0CA 5KP10(C)A-HF 11.10 12.30 5 15 10.0 294.12 17.0 5KP10A 5KP10CA 5KP11(C)A-HF 12.20 13.50 5 2 11.0 274.73 18.2 5KP11A 5KP11CA 5KP12(C)A-HF 13.30 14.70 5 2 12.0 251.26 19.9 5KP12A 5KP12CA 5KP13(C)A-HF 14.40 15.90 5 2 13.0 232.56 21.5 5KP13A 5KP13CA 5KP14(C)A-HF 15.60 17.20 5 2 14.0 215.52 23.2 5KP14A 5KP14CA 5KP15(C)A-HF 16.70 18.50 5 2 15.0 204.92 24.4 5KP15A 5KP15CA 5KP16(C)A-HF 17.80 19.70 5 2 16.0 192.31 26.0 5KP16A 5KP16CA 5KP17(C)A-HF 18.90 20.90 5 2 17.0 181.16 27.6 5KP17A 5KP17CA 5KP18(C)A-HF 20.00 22.10 5 2 18.0 171.23 29.2 5KP18A 5KP18CA 5KP19(C)A-HF 21.10 23.30 5 2 19.0 162.44 30.8 5KP19A 5KP19CA 5KP20(C)A-HF 22.20 24.50 5 2 20.0 154.32 32.4 5KP20A 5KP20CA 5KP22(C)A-HF 24.40 26.90 5 2 22.0 140.85 35.5 5KP22A 5KP22CA 5KP24(C)A-HF 26.70 29.50 5 2 24.0 128.53 38.9 5KP24A 5KP24CA 5KP26(C)A-HF 28.90 31.90 5 2 26.0 118.76 42.1 5KP26A 5KP26CA 5KP28(C)A-HF 31.10 34.40 5 2 28.0 110.13 45.4 5KP28A 5KP28CA 5KP30(C)A-HF 33.30 36.80 5 2 30.0 103.31 48.4 5KP30A 5KP30CA 5KP33(C)A-HF 36.70 40.60 5 2 33.0 93.81 53.3 5KP33A 5KP33CA 5KP36(C)A-HF 40.00 44.20 5 2 36.0 86.06 58.1 5KP36A 5KP36CA 5KP40(C)A-HF 44.40 49.10 5 2 40.0 77.52 64.5 5KP40A 5KP40CA 5KP43(C)A-HF 47.80 52.80 5 2 43.0 72.05 69.4 5KP43A 5KP43CA 5KP45(C)A-HF 50.00 55.30 5 2 45.0 68.78 72.7 5KP45A 5KP45CA 5KP48(C)A-HF 53.30 58.90 5 2 48.0 64.60 77.4 5KP48A 5KP48CA 5KP51(C)A-HF 56.70 62.70 5 2 51.0 60.68 82.4 5KP51A 5KP51CA 5KP54(C)A-HF 60.00 66.30 5 2 54.0 57.41 87.1 5KP54A 5KP54CA 5KP58(C)A-HF 64.40 71.20 5 2 58.0 53.42 93.6 5KP58A 5KP58CA 5KP60(C)A-HF 66.70 73.70 5 2 60.0 51.65 96.8 5KP60A 5KP60CA 5KP64(C)A-HF 71.10 78.60 5 2 64.0 48.54 103.0 5KP64A 5KP64CA 5KP70(C)A-HF 77.80 86.00 5 2 70.0 44.25 113.0 5KP70A 5KP70CA 5KP75(C)A-HF 83.30 92.10 5 2 75.0 41.32 121.0 5KP75A 5KP75CA 5KP78(C)A-HF 86.70 95.80 5 2 78.0 39.68 126.0 5KP78A 5KP78CA 5KP80(C)A-HF 88.80 97.60 5 2 80.0 38.58 129.6 5KP80A 5KP80CA 5KP85(C)A-HF 94.40 104.00 5 2 85.0 36.50 137.0 5KP85A 5KP85CA Note: 1) Suffix A denotes 5% tolerance devices. 2) Add suffix “C” or “CA” after part number to specify Bi-directional devices. 3) For Bi-Directional devices having VR of 10 volts and under, the IR limit is double. Company reserves the right to improve product design , functions and reliability without notice. REV:C Page 3 QW-JTV03 Comchip Technology CO., LTD. 5000W Transient Voltage Suppressor Electrical Characteristics (5KP-HF Series) Breakdown voltage VBR @ IT Part No. Min. (V) Max. (V) IT (mA) Maximum Reverse Leakage @VRWM Working Peak Reverse Voltage Maximum Reverse Surge Current Maximum Clamping Voltage @IPP IR (uA) VRWM (V) IPP (A) VC (V) Marking Code UNI BI 5KP90(C)A-HF 100.00 111.00 5 2 90.0 34.25 146.0 5KP90A 5KP90CA 5KP100(C)A-HF 111.00 123.00 5 2 100.0 30.86 162.0 5KP100A 5KP100CA 5KP110(C)A-HF 122.00 135.00 5 2 110.0 28.25 177.0 5KP110A 5KP110CA 5KP120(C)A-HF 133.00 147.00 5 2 120.0 25.91 193.0 5KP120A 5KP120CA 5KP130(C)A-HF 144.00 159.00 5 2 130.0 23.92 209.0 5KP130A 5KP130CA 5KP140(C)A-HF 155.00 171.00 5 2 140.0 22.05 226.8 5KP140A 5KP140CA 5KP150(C)A-HF 167.00 185.00 5 2 150.0 20.58 243.0 5KP150A 5KP150CA 5KP160(C)A-HF 178.00 197.00 5 2 160.0 19.31 259.0 5KP160A 5KP160CA 5KP170(C)A-HF 189.00 209.00 5 2 170.0 18.18 275.0 5KP170A 5KP170CA 5KP180(C)A-HF 200.00 220.00 5 2 180.0 17.15 291.6 5KP180A 5KP180CA 5KP190(C)A-HF 211.00 232.00 5 2 190.0 16.24 307.8 5KP190A 5KP190CA 5KP200(C)A-HF 224.00 247.00 5 2 200.0 15.43 324.0 5KP200A 5KP200CA 5KP210(C)A-HF 233.00 258.00 5 2 210.0 14.31 349.5 5KP210A 5KP210CA 5KP220(C)A-HF 246.00 272.00 5 2 220.0 14.04 356.0 5KP220A 5KP220CA 5KP250(C)A-HF 279.00 309.00 5 2 250.0 12.35 405.0 5KP250A 5KP250CA 5KP300(C)A-HF 335.00 371.00 5 2 300.0 10.29 486.0 5KP300A 5KP300CA 5KP350(C)A-HF 391.00 432.00 5 2 350.0 8.82 567.0 5KP350A 5KP350CA 5KP400(C)A-HF 447.00 494.00 5 2 400.0 7.72 648.0 5KP400A 5KP400CA 5KP440(C)A-HF 492.00 543.00 5 2 440.0 7.01 713.0 5KP440A 5KP440CA Note: 1) Suffix A denotes 5% tolerance devices. 2) Add suffix “C” or “CA” after part number to specify Bi-directional devices. 3) For Bi-Directional devices having VR of 10 volts and under, the IR limit is double. Company reserves the right to improve product design , functions and reliability without notice. REV:C Page 4 QW-JTV03 Comchip Technology CO., LTD. 5000W Transient Voltage Suppressor Taping Specification For Axial Lead Diodes E 90° ± 5° Z A L L1 B H L2 T E W R-6 R-6 SYMBOL A B Z T E (mm) 10.00 ± 0.50 52.00 ± 0.50 1.20 (max) 6.00 ± 0.40 1.00 (max) (inch) 0.394 ± 0.020 2.047 ± 0.020 0.047 (max) 0.236 ± 0.016 0.039 (max) SYMBOL L1 L2 L W H (mm) 1.00 (max) 1.00 (max) 260.00 75.00 145.00 (inch) 0.039 (max) 0.039 (max) 10.236 2.953 5.709 Standard Packaging AMMO PACK Case Type R-6 BOX CARTON ( pcs ) ( pcs ) 250 3,750 Company reserves the right to improve product design , functions and reliability without notice. REV:C Page 5 QW-JTV03 Comchip Technology CO., LTD.