5KP Transient 9ROWDJH6XSSUHVVRUV Series MERITEK 6 UL E223045 FEATURES Plastic package. Glass passivated chip junction. 5,000W Peak Pulse Power capability on 10/1000µs waveform. Excellent clamping capability. Repetition rate (duty cycle): 0.05%. Low incremental surge resistance. Fast response time: typically less than 1.0ps from 0 volt to BV min. Typical IR less than 2µA for VBR>=10V. i High temperature soldering guaranteed: 265°C/10 seconds/.375", P600 (9.5mm) lead length, 5lbs, (2.3kg) tension. ( M MECHANICAL DATA M Case: Molded plastic over glass passivated junction. Terminals: Plated Axial leads, solderable per MIL-STD-750, Method 2026. Polarity: Color band denotes cathode except Bipolar. Mounting Position: Any. Weight: 0.07 ounce, 2.5grams. 1 DEVICES FOR BIPOLAR APPLICATION For Bidirectional use C or CA suffix for type 5KP5.0 through type 5KP250 (e.g. 5KP5.0C, 5KP250CA); Electrical characteristics apply in both directions. MAXIMUM RATINGS AND CHARACTERISTICS Ratings at 25ć ambient temperature unless otherwise specified. RATING SYMBOL VALUE UNIT PPPM Minimum 5,000 Watts IPPM See Table Amps PM(AV) 8.0 Watts IFSM 400 Amps TJ , TSTG -55 to +175 ć Peak Pulse Power Dissipation on 10/1000ȝs waveform. (Note 1ˈFig. 1) Peak Pulse Current on 10/1000ȝs waveform. (Note 1ˈFig. 3) Steady State Power Dissipation at TL =75ćˈLead length .375” (9.5mm). ( Fig. 5) Peak Forward Surge Currentˈ8.3ms Single Half Sine-Wave Superimposed on Rated Load. (JEDEC Method) (Note 2, Fig. 6) Operating junction and Storage Temperature Range. Notes: 1. Non-repetitive current pulse, per Fig. 3 and derated above TA = 25ć per Fig. 2. 2. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle = 4 pulses per minute maximum. All specifications are subject to change without notice. 1 Rev 7 5KP Transient 9ROWDJH6XSSUHVVRUV Series MERITEK PACKAGE DIMENSIONS d D DIA. s I L T DIA. L P P600 Millimeters Item Inches Min. Max. Min. Max. L 25.40 - 1.000 - T 8.60 9.10 0.340 0.360 d 8.60 9.10 0.340 0.360 s 1.22 1.32 0.048 0.052 SPECIFICATIONS E Part Number UNI-POLAR BI-POLAR Maximum Reverse Breakdown Breakdown Peak Reverse Test Stand-Off Voltage Voltage Clamping Pulse Leakage Current Voltage MIN.@IT MAX.@IT Voltage @IPP Current @VRWM VRWM(V) VBR MIN.(V) VBR MAX.(V) IT(mA) VC(V) IPP(A) IR(μA) 5KP5.0A 5KP5.0CA 5.0 6.40 7.00 50 9.2 554.3 5000 5KP6.0A 5KP6.0CA 6.0 6.67 7.37 50 10.3 495.1 5000 5KP6.5A 5KP6.5CA 6.5 7.22 7.98 50 11.2 455.4 2000 5KP7.0A 5KP7.0CA 7.0 7.78 8.60 50 12.0 425.0 1000 5KP7.5A 5KP7.5CA 7.5 8.33 9.21 5 12.9 395.3 250 5KP8.0A 5KP8.0CA 8.0 8.89 9.83 5 13.6 375.0 150 5KP8.5A 5KP8.5CA 8.5 9.44 10.40 5 14.4 354.2 50 5KP9.0A 5KP9.0CA 9.0 10.00 11.10 5 15.4 331.2 20 5KP10A 5KP10CA 10.0 11.10 12.30 5 17.0 300.0 15 5KP11A 5KP11CA 11.0 12.20 13.50 5 18.2 280.2 2 5KP12A 5KP12CA 12.0 13.30 14.70 5 19.9 256.3 2 5KP13A 5KP13CA 13.0 14.40 15.90 5 21.5 237.2 2 5KP14A 5KP14CA 14.0 15.60 17.20 5 23.2 219.8 2 5KP15A 5KP15CA 15.0 16.70 18.50 5 24.4 209.0 2 5KP16A 5KP16CA 16.0 17.80 19.70 5 26.0 196.2 2 5KP17A 5KP17CA 17.0 18.90 20.90 5 27.6 184.8 2 2 Rev 7 5KP Transient 9ROWDJH6XSSUHVVRUV Series MERITEK Part Number UNI-POLAR BI-POLAR Maximum Reverse Breakdown Breakdown Peak Reverse Test Stand-Off Voltage Pulse Leakage Voltage Clamping Current Voltage MIN.@IT MAX.@IT Voltage @IPP Current @VRWM VRWM(V) VBR MIN.(V) VBR MAX.(V) IT(mA) VC(V) IPP(A) IR(μA) 5KP18A 5KP18CA 18.0 20.00 22.10 5 29.2 174.7 2 5KP20A 5KP20CA 20.0 22.20 24.50 5 32.4 157.4 2 5KP22A 5KP22CA 22.0 24.00 26.90 5 35.5 143.7 2 5KP24A 5KP24CA 24.0 26.70 29.50 5 38.9 131.1 2 5KP26A 5KP26CA 26.0 28.90 31.90 5 42.1 121.1 2 5KP28A 5KP28CA 28.0 31.10 34.40 5 45.4 112.3 2 5KP30A 5KP30CA 30.0 33.30 36.80 5 48.4 105.4 2 5KP33A 5KP33CA 33.0 36.70 40.60 5 53.3 95.7 2 5KP36A 5KP36CA 36.0 40.00 44.20 5 58.1 87.8 2 5KP40A 5KP40CA 40.0 44.40 49.10 5 64.5 79.1 2 5KP43A 5KP43CA 43.0 47.80 52.80 5 69.4 73.5 2 5KP45A 5KP45CA 45.0 50.00 55.30 5 72.7 70.2 2 5KP48A 5KP48CA 48.0 53.30 58.90 5 77.4 65.9 2 5KP51A 5KP51CA 51.0 56.70 62.70 5 82.4 61.9 2 5KP54A 5KP54CA 54.0 60.00 66.30 5 87.1 58.6 2 5KP58A 5KP58CA 58.0 64.40 71.20 5 93.6 54.5 2 5KP60A 5KP60CA 60.0 66.70 73.70 5 96.8 52.7 2 5KP64A 5KP64CA 64.0 71.10 78.60 5 103.0 49.5 2 5KP70A 5KP70CA 70.0 77.80 86.00 5 113.0 45.1 2 5KP75A 5KP75CA 75.0 83.30 92.10 5 121.0 42.1 2 5KP78A 5KP78CA 78.0 86.70 95.80 5 126.0 40.5 2 5KP85A 5KP85CA 85.0 94.40 104.00 5 137.0 37.2 2 5KP90A 5KP90CA 90.0 100.00 111.00 5 146.0 34.9 2 5KP100A 5KP100CA 100.0 110.00 123.00 5 162.0 31.5 2 5KP110A 5KP110CA 110.0 122.00 135.00 5 177.0 28.8 2 5KP120A 5KP120CA 120.0 133.00 147.00 5 193.0 26.4 2 5KP130A 5KP130CA 130.0 144.00 159.00 5 209.0 24.4 2 5KP150A 5KP150CA 150.0 167.00 185.00 5 243.0 21.0 2 5KP160A 5KP160CA 160.0 178.00 197.00 5 259.0 19.7 2 5KP170A 5KP170CA 170.0 189.00 209.00 5 275.0 18.5 2 5KP180A 5KP180CA 180.0 200.00 221.00 5 292.0 17.5 2 5KP190A 5KP190CA 190.0 211.00 233.00 5 310.0 16.5 2 5KP200A 5KP200CA 200.0 222.00 246.00 5 329.2 15.5 2 5KP210A 5KP210CA 210.0 233.00 258.00 5 349.5 14.6 2 5KP220A 5KP220CA 220.0 244.00 270.00 5 371.1 13.7 2 5KP250A 5KP250CA 250.0 277.00 306.00 5 425.0 12.0 2 N Note: For Bidirectional type having VRWM of 10 volts and less,the IR limit doubles. 3 Rev 7 5KP Transient 9ROWDJH6XSSUHVVRUV Series MERITEK RATING AND CHARACTERISTIC CURVES (TA: 25°C UNLESS OTHERWISE SPECIFIED) Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve 100 100 waveform shown in Fig.3 TA=25ºC Peak Pulse Power (kW) PPPM - Peak Pulse Power (kW) Non-repetitive pulse 10 1 0.1 0.1μs 75 50 25 0 1.0μs 10μs 100μs 1.0ms 0 10ms 25 td - Pulse Width (sec.) Figure 3 - Pulse Waveform 125 150 175 200 Bi-directional V=0V TJ=25°C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM Peak Value IPPM 100 10000 Half Value IPPM IPPM ( ) 50 10/1000μsec. Waveform as defined by R.E.A 0 Bi-directional @ VR 10 td 2.0 1000 100 2 1.0 Uni-directional V=0V Uni-directional @ VR Cj (pF) IPPM- Peak Pulse Current, % IRSM 100 100000 tr=10μsec 3.0 Tj=25C f=1.0MHz Vsig=50mVp-p 1 1.0 4.0 10.0 100.0 1000.0 VBR - Reverse Breakdown Voltage (V) t-Time (ms) Figure 6 - Maximum Non-Repetitive Forward Surge Current Uni-Directional Only Figure 5 - Steady State Power Dissipation Derating Curve 9 450 8 IFSM, Peak Forward Surge Current (A) Steady State Power Dissipation (W) 75 Figure 4 - Typical Junction Capacitance 150 0 50 TA - Ambient Temperature (ºC) 7 6 5 4 3 2 1 0 0 25 50 75 100 125 150 175 400 350 300 250 200 150 100 50 0 200 1 TL - Lead Temperature(ºC) 10 100 Number of Cycles at 60 Hz 4 Rev 7