New Product MBR(F,B)25H35CT thru MBR(F,B)25H60CT Vishay General Semiconductor Dual Common-Cathode Schottky Rectifier High Barrier Technology for Improved High Temperature Performance TO-220AB ITO-220AB 2 3 1 1 MBR25HxxCT PIN 1 PIN 2 PIN 3 CASE 2 3 MBRF25HxxCT PIN 1 PIN 2 PIN 3 TO-263AB K FEATURES • Guardring for overvoltage protection • Lower power losses, high efficiency • Low forward voltage drop • Low leakage current • High forward surge capability • High frequency operation • Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C (for TO-263AB package) • Solder dip 260 °C, 40 s (for TO-220AB and ITO-220AB package) • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC 2 TYPICAL APPLICATIONS For use in low voltage, high frequency rectifier of switching mode power supplies, freewheeling diodes, dc-to-dc converters or polarity protection application. 1 MBRB25HxxCT PIN 1 K HEATSINK PIN 2 MECHANICAL DATA Case: TO-220AB, ITO-220AB, TO-263AB Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC Q101 qualified), meets JESD 201 class 2 whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum PRIMARY CHARACTERISTICS IF(AV) 15 A x 2 VRRM 35 V to 60 V IFSM 150 A VF 0.54 V, 0.60 V IR 100 µA TJ max. 175 °C MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL MBR25H35CT MBR25H45CT MBR25H50CT MBR25H60CT UNIT Maximum repetitive peak reverse voltage VRRM 35 45 50 60 V Working peak reverse voltage VRWM 35 45 50 60 V Maximum DC blocking voltage VDC 35 45 50 60 V IF(AV) 30 15 A Non-repetitive avalanche energy per diode at 25 °C, IAS = 4 A, L = 10 mH EAS 80 mJ Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per diode IFSM 150 A Peak repetitive reverse surge current per diode at tp = 2.0 µs, 1 kHz IRRM Max. average forward rectified current (Fig. 1) Document Number: 88789 Revision: 19-May-08 total device per diode 1.0 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] 0.5 A www.vishay.com 1 New Product MBR(F,B)25H35CT thru MBR(F,B)25H60CT Vishay General Semiconductor MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL Peak non-repetitive reverse energy (8/20 µs waveform) MBR25H35CT Voltage rate of change (rated VR) MBR25H50CT 25 ERSM Electrostatic discharge capacitor voltage Human body model: C = 100 pF, R = 1.5 kΩ MBR25H45CT MBR25H60CT 20 UNIT mJ VC 25 kV dV/dt 10 000 V/µs TJ - 65 to + 175 °C Storage temperature range TSTG - 65 to + 175 °C Isolation voltage (ITO-220AB only) from terminal to heatsink t = 1 min VAC 1500 V Operating junction temperature range ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage per diode (1) IF = 15 A IF = 15 A IF = 30 A IF = 30 A Maximum reverse current at rated VR per diode (2) MBR25H35CT MBR25H45CT SYMBOL MBR25H50CT MBR25H60CT TYP. MAX. TYP. MAX. UNIT TJ = 25 °C TJ = 125 °C TJ = 25 °C TJ = 125 °C VF 0.50 0.63 0.64 0.54 0.74 0.67 0.56 0.68 0.70 0.60 0.85 0.72 V TJ = 25 °C TJ = 125 °C IR 6.0 100 20 4.0 100 20 µA mA Notes: (1) Pulse test: 300 µs pulse width, 1 % duty cycle (2) Pulse test: Pulse width ≤ 40 ms THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER Thermal resistance, junction to case per diode SYMBOL MBR MBRF MBRB UNIT RθJC 1.5 4.5 1.5 °C/W ORDERING INFORMATION (Example) PACKAGE UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE TO-220AB MBR25H45CT-E3/45 PREFERRED P/N 1.85 45 50/tube Tube ITO-220AB MBR25H45CT-E3/45 1.99 45 50/tube Tube TO-263AB MBRB25H45CT-E3/45 1.35 45 50/tube Tube TO-263AB MBRB25H45CT-E3/81 1.35 81 800/reel Tape and reel TO-220AB MBR25H45CTHE3/45 (1) 1.85 45 50/tube Tube ITO-220AB MBR25H45CTHE3/45 (1) 1.99 45 50/tube Tube TO-263AB MBRB25H45CTHE3/45 (1) 1.35 45 50/tube Tube TO-263AB (1) 1.35 81 800/reel Tape and reel MBRB25H45CTHE3/81 Note: (1) Automotive grade AEC Q101 qualified www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88789 Revision: 19-May-08 New Product MBR(F,B)25H35CT thru MBR(F,B)25H60CT Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 100 MBR, MBRB 30 MBRF 20 10 0 25 50 75 100 125 150 TJ = 150 °C 1 TJ = 125 °C 0.1 MBR25H35CT - MBR25H45CT MBR25H50CT - MBR25H60CT 0.01 0.001 TJ = 25 °C 0 175 20 40 60 80 100 Case Temperature (°C) Percent of Rated Peak Reverse Voltage (%) Figure 1. Forward Derating Curve (Total) Figure 4. Typical Reverse Characteristics Per Diode 150 10 000 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p TJ = TJ Max. 8.3 ms Single Half Sine-Wave Junction Capacitance (pF) 125 100 75 50 25 1000 MBR25H35CT - MBR25H45CT MBR25H50CT - MBR25H60CT 0 100 1 10 100 0.1 1 10 100 Number of Cycles at 60 Hz Reverse Voltage (V) Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Per Diode Figure 5. Typical Junction Capacitance Per Diode 10 TJ = 150 °C 10 TJ = 25 °C 1 TJ = 125 °C 0.1 MBR25H35CT - MBR25H45CT MBR25H50CT - MBR25H60CT 0.01 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Transient Thermal Impedance (°C/W) 100 Instantaneous Forward Current (A) 10 0.0001 0 Peak Forward Surge Current (A) Instantaneous Reverse Leakage Current (mA) Average Forward Current (A) 40 1 0.1 0.01 0.1 1 10 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Figure 3. Typical Instantaneous Forward Characteristics Per Diode Figure 6. Typical Transient Thermal Impedance Per Diode Document Number: 88789 Revision: 19-May-08 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 New Product MBR(F,B)25H35CT thru MBR(F,B)25H60CT Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AB ITO-220AB 0.370 (9.40) 0.360 (9.14) 0.185 (4.70) 0.175 (4.44) 0.154 (3.91) 0.148 (3.74) PIN 2 3 0.160 (4.06) 0.140 (3.56) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.105 (2.67) 0.095 (2.41) 0.104 (2.65) 0.096 (2.45) 2 0.135 (3.43) DIA. 0.122 (3.08) DIA. 7° REF. 0.350 (8.89) 0.330 (8.38) 3 7° REF. 0.191 (4.85) 0.171 (4.35) 0.560 (14.22) 0.530 (13.46) 0.560 (14.22) 0.530 (13.46) 0.035 (0.89) 0.025 (0.64) 0.025 (0.64) 0.015 (0.38) 0.105 (2.67) 0.095 (2.41) 0.022 (0.56) 0.014 (0.36) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.057 (1.45) 0.045 (1.14) 0.035 (0.90) 0.028 (0.70) 0.205 (5.20) 0.195 (4.95) 0.671 (17.04) 0.651 (16.54) PIN 1 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.140 (3.56) DIA. 0.125 (3.17) DIA. 0.600 (15.24) 0.580 (14.73) 0.603 (15.32) 0.573 (14.55) 7° REF. 0.076 (1.93) REF. 45° REF. 0.145 (3.68) 0.135 (3.43) 0.635 (16.13) 0.625 (15.87) 0.110 (2.79) 0.100 (2.54) 0.076 (1.93) REF. 0.055 (1.39) 0.045 (1.14) 0.113 (2.87) 0.103 (2.62) 1 0.190 (4.83) 0.170 (4.32) 0.404 (10.26) 0.384 (9.75) 0.415 (10.54) MAX. 0.028 (0.71) 0.020 (0.51) 0.205 (5.21) 0.195 (4.95) TO-263AB 0.411 (10.45) 0.380 (9.65) 0.190 (4.83) 0.160 (4.06) 0.245 (6.22) MIN. 0.055 (1.40) 0.045 (1.14) Mounting Pad Layout 0.42 (10.66) MIN. K 0.360 (9.14) 0.320 (8.13) 1 K 2 0.624 (15.85) 0.591 (15.00) 0 to 0.01 (0 to 0.254) 0.110 (2.79) 0.090 (2.29) 0.021 (0.53) 0.014 (0.36) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) www.vishay.com 4 0.055 (1.40) 0.047 (1.19) 0.205 (5.20) 0.195 (4.95) 0.140 (3.56) 0.110 (2.79) 0.33 (8.38) MIN. 0.670 (17.02) 0.591 (15.00) 0.15 (3.81) MIN. 0.08 (2.032) MIN. 0.105 (2.67) 0.095 (2.41) For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88789 Revision: 19-May-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1