POLYFUSE® Resettable PTCs Radial Leaded > 16R Series 16R Series Description The 16R Series Radial Leaded device is designed to provide different products in the general applications with maximum 16 volts and a maximum 100-ampere short circuit rating. Features t3P)4DPNQMJBOU t'BTUUJNFoUPoUSJQ t.FFUTBMM64#QSPUFDUJPO requirements t"TIPSUDJSDVJUSBUJOH t70QFSBUJOHWPMUBHFT Agency Approvals AGENCY AGENCY FILE NUMBER Applications E183209 t$PNQVUFSTQFSJQIFSBMT t"OZ64#BQQMJDBUJPO t(FOFSBM&MFDUSPOJDT R50119318 Electrical Characteristics I trip (A) V max (Vdc) I max (A) Pd typ. (W) Maximum Time To Trip Resistance Current (A) Time (Sec.) R min (Ω) R 1max (Ω) Agency Approvals 16R250G 2.5 4.7 16 100 1.0 12.5 5.0 0.0220 0.0530 X X 16R300G 3.0 5.1 16 100 2.3 15.0 1.0 0.0380 0.0975 X X 16R400G 4.0 6.8 16 100 2.4 20.0 1.7 0.0210 0.0600 X X 16R500G 5.0 8.5 16 100 2.6 25.0 2.0 0.0150 0.0340 X X 16R600G 6.0 10.2 16 100 2.8 30.0 3.3 0.0100 0.0280 X X 16R700G 7.0 11.9 16 100 3.0 35.0 3.5 0.0077 0.0200 X X 16R800G 8.0 13.6 16 100 3.0 40.0 5.0 0.0056 0.0175 X X 16R900G 9.0 15.3 16 100 3.3 45.0 5.5 0.0047 0.0135 X X 16R1000G 10.0 17.0 16 100 3.6 50.0 6.0 0.0040 0.0102 X X 16R1100G 11.0 18.7 16 100 3.7 55.0 7.0 0.0037 0.0089 X X 16R1200G 12.0 20.4 16 100 4.2 60.0 7.5 0.0033 0.0086 X X 16R1400G 14.0 23.8 16 100 4.6 70.0 9.0 0.0026 0.0064 X X 16R Series Part Number I hold (A) I hold = Hold current: maximum current device will pass without tripping in 23°C still air. R min = Minimum resistance of device in initial (un-soldered) state. I trip = Trip current: minimum current at which the device will trip in 23°C still air. R 1max = Maximum resistance of device at 23°C measured one hour after tripping. V max = Maximum voltage device can withstand without damage at rated current (Imax) Caution: Operation beyond the specified rating may result in damage and possible arcing and flame. I max = Maximum fault current device can withstand without damage at rated voltage (Vmax) Pd = Power dissipated from device when in the tripped state at 23°C still air. ©2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/16R.html for current information. 117 Revised: April 3, 2009 16R Series POLYFUSE® Resettable PTCs Radial Leaded > 16R Series Temperature Rerating Ambient Operation Temperature -40°C -20°C 0°C 23°C 40°C 50°C 60°C 70°C 85°C Hold Current (A) Part Number 16R250G 3.7 3.3 2.9 2.5 2.2 2.0 1.8 1.6 1.3 16R300G 4.4 4.0 3.5 3.0 2.6 2.4 2.1 1.9 1.6 16R400G 5.9 5.3 4.7 4.0 3.5 3.2 2.9 2.6 2.1 16R500G 7.4 6.6 5.9 5.0 4.4 4.0 3.6 3.2 2.6 16R600G 8.9 8.0 7.1 6.0 5.2 4.8 4.3 3.9 3.2 16R700G 10.4 9.3 8.2 7.0 6.1 5.6 5.0 4.5 3.7 16R800G 11.8 10.6 9.4 8.0 7.0 6.3 5.7 5.1 4.2 16R900G 13.3 12.0 10.6 9.0 7.8 7.1 6.5 5.8 4.7 16R1000G 14.8 13.3 11.8 10.0 8.7 7.9 7.1 6.4 5.3 16R1100G 16.3 14.6 12.9 11.0 9.6 8.7 7.9 7.0 5.8 16R1200G 17.7 15.9 14.1 12.0 10.5 9.5 8.6 7.7 6.3 16R1400G 20.7 18.6 16.5 14.0 12.2 11.1 10.0 9.0 7.4 Average Time Current Curves 2.5 A 3.0 A 4.0 A 5.0 A 6.0 A 7.0 A 8.0 A 9.0 A 10.0 A 11.0 A 12.0 A 14.0 A Temperature Rerating Curve 170% 16R 150% Percentage of Rated Current 100 Time in Seconds 10 130% 110% 90% 70% 50% 30% 1 10% -40 -30 -20 -10 0 10 20 30 40 Temperature (°C) 50 60 70 80 0.1 0.01 1 10 100 1000 Current in Amperes The average time current curves and Temperature Rerating curve performance is affected by a number or variables, and these curves provided as guidance only. Customer must verify the performance in their application. 16R Series 118 Revised: April 3, 2009 ©2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/16R.html for current information. POLYFUSE® Resettable PTCs Radial Leaded > 16R Series Soldering Parameters - Wave Soldering Refer to the condition recommended by the flux manufacturer. Pre-Heating Zone Cooling Zone Cooling by natural convection in air. Cooling 220 Temperature (°C) Soldering Zone Max. solder temperature should not exceed 260°C Soldering 260 Max. ramping rate should not exceed 4°C/ Sec. Preheating 190 160 0 60 min. 5 max. Time(s) 2.5A: Tin-plated Copper clad Steel 3.0 - 14.0A: Tin-plated Copper Operating/Storage Temperature -40°C to +85°C Soldering Characteristics Solderability per MIL–STD–202, Method 208E Maximum Device Surface Temperature in Tripped State 125°C Insulating Material Cured, flame retardant epoxy polymer meets UL94V-0 requirements. Passive Aging +85°C, 1000 hours -/+ 5% typical resistance change Device Labeling Marked with ‘LF’, voltage, current rating, and date code. Humidity Aging +85°C, 85% R.H., 1000 hours -/+ 5% typical resistance change Thermal Shock +85°C to -40°C 10 times -/+ 5% typical resistance change Solvent Resistance MIL–STD–202, Method 215F No change Moisture Resistance Level Level 1, J–STD–020C Lead Material ©2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/16R.html for current information. 119 Revised: April 3, 2009 16R Series 16R Series Environmental Specifications Physical Specifications POLYFUSE® Resettable PTCs Radial Leaded > 16R Series Dimensions Part Marking System A Single Sided Marking E A E telfuse demark B 16 Voltage Rating Current Rating Date Code (Contact Littelfuse for additional information) 250G XXXX B D D C C Figure 1 Figure 2 A Part Number Figure B C D E Physical Characteristics Inches mm Inches mm Inches mm Inches mm Inches mm Max. Max. Max. Max. Typ. Typ. Min. Min. Max. Max. Lead (dia) Inches mm Material 16R250G 2 0.35 8.90 0.50 12.80 0.20 5.1 0.13 3.18 0.12 3.00 0.020 0.51 16R300G 1 0.28 7.10 0.43 11.00 0.20 5.1 0.30 7.6 0.12 3.00 0.032 0.81 Sn/CuFe Sn/Cu 16R400G 1 0.35 8.90 0.50 12.80 0.20 5.1 0.30 7.6 0.12 3.00 0.032 0.81 Sn/Cu 16R500G 1 0.41 10.40 0.56 14.30 0.20 5.1 0.30 7.6 0.12 3.00 0.032 0.81 Sn/Cu Sn/Cu 16R600G 1 0.42 10.70 0.67 17.10 0.20 5.1 0.30 7.6 0.12 3.00 0.032 0.81 16R700G 1 0.44 11.20 0.78 19.70 0.20 5.1 0.30 7.6 0.12 3.00 0.032 0.81 Sn/Cu 16R800G 1 0.50 12.70 0.82 20.90 0.20 5.1 0.30 7.6 0.12 3.00 0.032 0.81 Sn/Cu 16R900G 1 0.55 14.00 0.85 21.70 0.20 5.1 0.30 7.6 0.12 3.00 0.032 0.81 Sn/Cu 16R1000G 1 0.65 16.50 0.99 25.20 0.20 5.1 0.30 7.6 0.12 3.00 0.032 0.81 Sn/Cu 16R1100G 1 0.69 17.50 1.02 26.00 0.20 5.1 0.30 7.6 0.12 3.00 0.032 0.81 Sn/Cu 16R1200G 1 0.69 17.50 1.10 28.00 0.40 10.2 0.30 7.6 0.14 3.50 0.039 1.00 Sn/Cu 16R1400G 1 0.93 23.50 1.10 27.90 0.40 10.2 0.30 7.6 0.14 3.50 0.039 1.00 Sn/Cu 16R Series 120 Revised: April 3, 2009 ©2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/16R.html for current information. POLYFUSE® Resettable PTCs Radial Leaded > 16R Series Part Ordering Number System 16 R 500 G PR PACKAGING STYLE BLANK: Bulk R: Tape & Ammo SERIES QUANTITY CODE: F=200 H=100 M=1000 D=1500 P=2000 U=500 TYPE: G (16VDC) I HOLD CURRENT CODE (SEE TABLE BELOW) R: RADIAL VOLTAGE RATING (VDC) Part Number 16R250G 16R300G 16R400G 16R500G 16R600G 16R700G 16R800G 16R900G 16R1000G 16R1100G 16R1200G 16R1400G Ordering Number 16R250GU 16R250GPR 16R300GU 16R300GPR 16R400GU 16R400GPR 16R500GU 16R500GPR 16R600GU 16R600GDR 16R700GF 16R700GMR 16R800GF 16R800GMR 16R900GF 16R900GMR 16R1000GF 16R1000GMR 16R1100GF 16R1100GMR 16R1200GH 16R1200GMR 16R1400GH I hold (A) 2.50 I hold Code 250 3.00 300 4.00 400 5.00 500 6.00 600 7.00 700 8.00 800 9.00 900 10.00 1000 11.00 1100 12.00 1200 14.00 1400 ©2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/16R.html for current information. Packaging Option Quantity Quantity & Packaging Codes Bulk 500 U Tape and Ammo 2000 PR Bulk 500 U Tape and Ammo 2000 PR Bulk 500 U Tape and Ammo 2000 PR Bulk 500 U Tape and Ammo 2000 PR Bulk 500 U Tape and Ammo 1500 DR Bulk 200 F Tape and Ammo 1000 MR Bulk 200 F Tape and Ammo 1000 MR Bulk 200 F Tape and Ammo 1000 MR Bulk 200 F Tape and Ammo 1000 MR Bulk 200 F Tape and Ammo 1000 MR Bulk 100 H Tape and Ammo 1000 MR Bulk 100 H 121 Revised: April 3, 2009 16R Series Packaging Options 16R Series POLYFUSE® Resettable PTCs Radial Leaded > 16R Series Tape and Ammo Specifications Devices taped using EIA468-B/IE286-2 standards. See table below and Figure 1 for details. Dimensions Dimension EIA Mark IEC Mark Dim. (mm) Tol. (mm) Carrier tape width W W 18 -0.5 /+1.0 Hold down tape width: W4 W0 11 min. Top distance between tape edges W6 W2 3 max. Sprocket hole position W5 W1 9 -0.5 /+0.75 Sprocket hole diameter* D0 D0 4 -0.32 /+0.2 Abscissa to plane(straight lead) H H 18.5 -/+ 3.0 Abscissa to plane(kinked lead) H0 H0 16 -/+ 0.5 Abscissa to top 45.0 max. Overall width w/o lead protrusion 56 max. Overall width w/ lead protrusion Lead protrusion l1 L1 57 max. 1.0 max. max. Protrusion of cut out L L 11 Protrusion beyond hold-down tape l2 l2 Not specified Sprocket hole pitch P0 P0 25.4 -/+ 0.5 Device pitch: 25.4 Pitch tolerance 20 consecutive. -/+ 1 0.9 max. Tape thickness t Tape thickness with splice t1 t Splice sprocket hole alignment 2.0 max. 0 -/+ 0.3 0 -/+ 1.0 Body lateral deviation Δh Δh Body tape plane deviation Δp Δp 0 -/+ 1.3 Ordinate to adjacent component lead* P1 P1 3.81 -/+ 0.7 7.62 -/+ 0.7 Lead spacing:16R250G-16R1100G F F 5.08 -/+ 0.8 Lead spacing:16R1200G-16R1400G F F 10.18 -/+ 0.8 Ordinate to adjacent component lead* *Differs from EIA specification Tape and Ammo Diagram Δh Δh Figure 1 Δh Δp Reference plane A1 H1 F A L B H0 W4 W5 W H1 C 1 H C2 I2 L1 P0 D0 Direction of unreeling Cross section A - B t 16R Series 122 Revised: April 3, 2009 ©2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/16R.html for current information.