Resettable PTCs 72R Datasheet

POLY-FUSE® Resettable PTCs
Radial Leaded > 72R Series
72R Series
RoHS
*
Description
The 72R Series is designed to provide overcurrent
protection to 72Vdc maximum voltage with a maximum
40A short circuit rating.
Features
• 72Vdc max voltage w/max • Resettable feature
40A short circuit rating
• Ideal for a broad range of
• RoHS compliant, Lead-Free general electronics using a
and Halogen Free*
low voltage power supply
Agency Approvals
Applications
AGENCY
• Load protection on wide
• Computer peripherals
range of low voltage power •General electronics
supplies
AGENCY FILE NUMBER
E183209
• Computers
R50119318
Electrical Characteristics
Part Number
I hold
(A)
I trip
(A)
V max
(Vdc)
I max
(A)
Pd
typ.
(W)
72R020X
0.20
0.40
72
40
72R025X
0.25
0.50
72
40
72R030X
0.30
0.60
72
40
72R040X
0.40
0.80
72
40
72R050X
0.50
1.00
72
72R065X
0.65
1.30
72
72R075X
0.75
1.50
72R090X
0.90
1.80
Maximum Time
To Trip
Resistance
Agency
Approvals
Current
(A)
Time
(Sec.)
R min
(Ω)
R 1max
(Ω)
0.41
1.00
2.20
1.830
4.400
X
X
0.45
1.25
2.50
1.250
3.000
X
X
0.49
1.50
3.00
0.880
2.100
X
X
0.56
2.00
3.80
0.550
1.290
X
X
40
0.77
2.50
4.00
0.500
1.170
X
X
40
0.88
3.25
5.30
0.310
0.720
X
X
72
40
0.92
3.75
6.30
0.250
0.600
X
X
72
40
0.99
4.50
7.20
0.200
0.470
X
X
72R110X
1.10
2.20
72
40
1.50
5.50
8.20
0.150
0.380
X
X
72R135X
1.35
2.70
72
40
1.70
6.75
9.60
0.120
0.300
X
X
72R160X
1.60
3.20
72
40
1.90
8.00
11.40
0.090
0.220
X
X
72R185X
1.85
3.70
72
40
2.10
9.25
12.60
0.080
0.190
X
X
72R250X
2.50
5.00
72
40
2.50
12.50
15.60
0.050
0.130
X
X
72R300X
3.00
6.00
72
40
2.80
15.00
19.80
0.040
0.100
X
X
72R375X
3.75
7.50
72
40
3.20
18.75
24.00
0.030
0.080
X
X
I hold = Hold current: maximum current device will pass without tripping in 20°C still air.
I trip = Trip current: minimum current at which the device will trip in 20°C still air.
V max = Maximum voltage device can withstand without damage at rated current (I max)
I max = Maximum fault current device can withstand without damage at rated voltage (Vmax)
R 1max = Maximum resistance of device at 20°C measured one hour after tripping or reflow
soldering of 260°C for 20 sec.
Caution: Operation beyond the specified rating may result in damage and possible arcing
and flame.
P d = Power dissipated from device when in the tripped state at 20°C still air.
R min = Minimum resistance of device in initial (un-soldered) state.
* Effective January 1, 2010, all 72R PTC products will be manufactured Halogen Free (HF). Existing Non-Halogen Free 72R PTC products may continue to be sold, until supplies are depleted.
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 01/23/15
POLY-FUSE® Resettable PTCs
Radial Leaded > 72R Series
Temperature Rerating
Ambient Operation Temperature
-40°C
-20°C
0°C
20°C
Part Number
40°C
50°C
60°C
70°C
85°C
0.08
Hold Current (A)
72R020X
0.31
0.27
0.24
0.20
0.16
0.14
0.13
0.11
72R025X
0.39
0.34
0.30
0.25
0.20
0.18
0.16
0.14
0.10
72R030X
0.47
0.41
0.36
0.30
0.24
0.22
0.19
0.16
0.12
72R040X
0.62
0.54
0.48
0.40
0.32
0.29
0.25
0.22
0.16
72R050X
0.78
0.68
0.60
0.50
0.41
0.36
0.32
0.27
0.20
72R065X
1.01
0.88
0.77
0.65
0.53
0.47
0.41
0.35
0.26
72R075X
1.16
1.02
0.89
0.75
0.61
0.54
0.47
0.41
0.30
72R090X
1.40
1.22
1.07
0.90
0.73
0.65
0.57
0.49
0.36
72R110X
1.71
1.50
1.31
1.10
0.89
0.79
0.69
0.59
0.44
72R135X
2.09
1.84
1.61
1.35
1.09
0.97
0.85
0.73
0.54
72R160X
2.48
2.18
1.90
1.60
1.30
1.15
1.01
0.86
0.64
72R185X
2.87
2.52
2.20
1.85
1.50
1.33
1.17
1.00
0.74
72R250X
3.88
3.40
2.98
2.50
2.03
1.80
1.58
1.35
1.00
72R300X
4.65
4.08
3.57
3.00
2.43
2.16
1.89
1.62
1.20
72R375X
5.81
5.10
4.46
3.75
3.04
2.70
2.36
2.03
1.50
170%
72R
Percentage of Rated Current
10
Time in Seconds
150%
130%
110%
10000
90%
1000
70%
50%
30%
1
250R
100000
10%
Time in Seconds
0.20A
0.25A
0.30A
0.40A
0.50A
0.65A
0.75A
0.90A
1.10A
1.35A
1.60A
1.85A
2.50A
3.00A
3.75A
100
0.080A
0.120A
0.145A
0.180A
Temperature Rerating Curve
Average Time Current Curves
-40 -30 -20
100
-1010 0
10
20 30
40
Temperature (°C)
50
60
70
80
1
Note:
Typical Temperature rerating curve, refer to table for derating data
0.1
0.1
0.01
0.01
0.1
1
10
100
Current in Amperes
0.1
1
10
Current in Amperes
The average time current curves and Temperature Rerating curve performance is affected
by a number or variables, and these curves provided as guidance only. Customer must
verify the performance in their application.
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 01/23/15
100
POLY-FUSE® Resettable PTCs
Radial Leaded > 72R Series
Soldering Parameters - Wave Soldering
Max. ramping rate should not exceed
4°C/Sec.
Max. solder temperature should not
exceed 260°C
Soldering Zone
Time within 5°C of actual Max. solder
temperature within 3 - 5 seconds
Soldering
260
Cooling
220
Temperature (°C)
Pre-Heating Zone
Refer to the condition recommended
by the flux manufacturer.
190
160
Preheating
Total time from 25°C room to Max.
solder temperature within 5 minutes
including Pre-Heating time
Cooling by natural convection in air.
Cooling Zone
0
Max. ramping down rate should not
exceed 6°C/Sec.
Physical Specifications
60 min.
5 max.
Time(s)
Environmental Specifications
Lead Material
0.20-0.40A: Tin-plated Copper clad steel
0.50-3.75A: Tin-plated Copper
Operating/Storage
Temperature
-40°C to +85°C
Soldering
Characteristics
Solderability per MIL–STD–202, Method
208
Maximum Device Surface
Temperature in Tripped State
125°C
Insulating Material
Cured, flame retardant epoxy polymer
meets UL 94V-0 requirements.
Passive Aging
+85°C, 1000 hours
-/+5% typical resistance change
Lead Solderability
Marked with ‘LF’, voltage, current rating,
and date code.
Humidity Aging
+85°C, 85% R.H. 1000 hours
-/+5% typical resistance change
Thermal Shock
+85°C to -40°C 10 times
-/+5% typical resistance change
Solvent Resistance
MIL–STD–202, Method 215
Moistrue Sesitivity Level
Level 1, J–STD–020
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 01/23/15
POLY-FUSE® Resettable PTCs
Radial Leaded > 72R Series
Dimensions
Part Marking System
Single Sided Marking
E
A
Doub
0
Littelfuse
Trademark
Voltage Rating
Current Rating
72
020X
XXXX
Littelfuse
Trademark
Date Code
(Contact Littelfuse
for additional
information)
B
D
F
C
Littelfuse
Trademark
A
Part
Number
B
C
D
E
F
Physical Characteristics
Inches
mm
Inches
mm
Inches
mm
Inches
mm
Inches
mm
Inches
mm
Lead (dia)
Max.
Max.
Max.
Max.
Typ.
Typ.
Min.
Min.
Max.
Max.
Typ.
Typ.
Inches
mm
72R020X
0.29
7.4
0.46
11.7
0.20
5.1
0.30
7.6
0.12
3.1
0.047
1.2
0.02
0.51
Sn/CuFe
72R025X
0.29
7.4
0.50
12.7
0.20
5.1
0.30
7.6
0.12
3.1
0.047
1.2
0.02
0.51
Sn/CuFe
72R030X
0.29
7.4
0.50
12.7
0.20
5.1
0.30
7.6
0.12
3.1
0.047
1.2
0.02
0.51
Sn/CuFe
72R040X
0.30
7.6
0.53
13.5
0.20
5.1
0.30
7.6
0.12
3.1
0.047
1.2
0.02
0.51
Sn/CuFe
72R050X
0.31
7.9
0.54
13.7
0.20
5.1
0.30
7.6
0.12
3.1
0.047
1.2
0.02
0.51
Sn/Cu
72R065X
0.37
9.4
0.57
14.5
0.20
5.1
0.30
7.6
0.12
3.1
0.047
1.2
0.02
0.51
Sn/Cu
72R075X
0.40
10.2
0.60
15.2
0.20
5.1
0.30
7.6
0.12
3.1
0.047
1.2
0.02
0.51
Sn/Cu
72R090X
0.44
11.2
0.62
15.8
0.20
5.1
0.30
7.6
0.12
3.1
0.047
1.2
0.02
0.51
Sn/Cu
Material
72R110X
0.51
13.0
0.72
18.2
0.20
5.1
0.30
7.6
0.12
3.1
0.055
1.4
0.03
0.81
Sn/Cu
72R135X
0.53
13.58
0.78
19.8
0.20
5.1
0.30
7.6
0.12
3.1
0.055
1.4
0.03
0.81
Sn/Cu
72R160X
0.60
15.36
0.85
21.6
0.20
5.1
0.30
7.6
0.12
3.1
0.055
1.4
0.03
0.81
Sn/Cu
72R185X
0.66
16.76
0.91
23.0
0.20
5.1
0.30
7.6
0.12
3.1
0.055
1.4
0.03
0.81
Sn/Cu
72R250X
0.78
19.93
1.03
26.2
0.40
10.2
0.30
7.6
0.12
3.1
0.055
1.4
0.03
0.81
Sn/Cu
72R300X
0.91
23.11
1.15
29.3
0.40
10.2
0.30
7.6
0.12
3.1
0.055
1.4
0.03
0.81
Sn/Cu
72R375X
1.04
26.3
1.22
31.1
0.40
10.2
0.30
7.6
0.12
3.1
0.055
1.4
0.03
0.81
Sn/Cu
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 01/23/15
POLY-FUSE® Resettable PTCs
Radial Leaded > 72R Series
Part Ordering Number System
72 R 090
X PR
PACKAGING STYLE
BLANK: Bulk
R: Tape & Ammo
SERIES
QUANTITY CODE: F=200 H=100 M=1000 P=2000 U=500
TYPE: X (72VDC)
I HOLD CURRENT CODE (Refer to Packaging or Electrical Characteristics tables)
R: RADIAL
VOLTAGE RATING (VDC)
Packaging
Part Number
72R020X
72R025X
72R030X
72R040X
72R050X
72R065X
72R075X
72R090X
72R110X
72R135X
72R160X
72R185X
72R250X
72R300X
72R375X
Ordering Part
Number
72R020XU
72R020XPR
72R025XU
72R025XPR
72R030XU
72R030XPR
72R040XU
72R040XPR
72R050XU
72R050XPR
72R065XU
72R065XPR
72R075XU
72R075XPR
72R090XU
72R090XPR
72R110XU
72R110XMR
72R135XF
72R135XMR
72R160XF
72R160XMR
72R185XF
72R185XMR
72R250XF
72R250XMR
72R300XF
72R300XMR
72R375XH
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 01/23/15
I hold
(A)
I hold
Code
0.20
020
0.25
025
0.30
030
0.40
040
0.50
050
0.65
065
0.75
075
0.90
090
1.10
110
1.35
135
1.60
160
1.85
185
2.50
250
3.00
300
3.75
375
Packaging
Option
Quantity
Quantity &
Packaging Codes
Bulk
500
U
Tape and Ammo
2000
PR
Bulk
500
U
Tape and Ammo
2000
PR
Bulk
500
U
Tape and Ammo
2000
PR
Bulk
500
U
Tape and Ammo
2000
PR
Bulk
500
U
Tape and Ammo
2000
PR
Bulk
500
U
Tape and Ammo
2000
PR
Bulk
500
U
Tape and Ammo
2000
PR
Bulk
500
U
Tape and Ammo
2000
PR
Bulk
500
U
Tape and Ammo
1000
MR
Bulk
200
F
Tape and Ammo
1000
MR
Bulk
200
F
Tape and Ammo
1000
MR
Bulk
200
F
Tape and Ammo
1000
MR
Bulk
200
F
Tape and Ammo
1000
MR
Bulk
200
F
Tape and Ammo
1000
MR
Bulk
100
H
POLY-FUSE® Resettable PTCs
Radial Leaded > 72R Series
Tape and Ammo Specifications
Devices taped using EIA468-B/IE286-2 standards. See table below and Figure 1 for details.
Dimension
EIA Mark
IEC Mark
Carrier tape width
W
Hold down tape width
Dimensions
Dim. (mm)
Tol. (mm)
W
18
–0.5 / +1.0
W4
W0
11
min.
Top distance between tape edges
W6
W2
3
max.
Sprocket hole position
W5
W1
9
–0.5 / +0.75
Sprocket hole diameter*
D0
D0
4
–0.32 / +0.2
Abscissa to plane (straight lead)
H
H
18.5
–/+ 3.0
Abscissa to plane (kinked lead)
H0
H0
16
–/+ 0.5
Abscissa to top 72R020X–72R090X
H1
H1
32.2
max.
Abscissa to top 72R110X–72R300X
H1
47.5
max.
Overall width without lead protrusion:
72R020X–72R090X
C1
42.5
max.
Overall width without lead protrusion:
72R110X–72R300X
Overall width with lead protrusion:
72R020X–72R090X
57
C2
Overall width with lead protrusion:
72R110X–72R300X
Lead protrusion
43.2
max.
1.0
max.
max.
58
L1
l1
Protrusion of cut out
L
L
11
Protrusion beyond hold–down tape
l2
l2
Not specified
Sprocket hole pitch: 72R020X–72R090X
P0
P0
12.7
–/+ 0.3
Sprocket hole pitch: 72R110X–72R300X
P0
P0
25.4
–/+ 0.5
Pitch tolerance
20
consecutive.
–/+ 1
Device pitch: 72R020X–72R090X
12.7
Device pitch: 72R110X–72R300X
25.4
Tape thickness
t
Tape thickness with splice
t1
t
Splice sprocket hole alignment
0.9
max.
2.0
max.
0
–/+ 0.3
Body lateral deviation
Δh
Δh
0
–/+ 1.0
Body tape plane deviation
Δp
Δp
0
–/+ 1.3
Ordinate to adjacent component lead*:
72R020X–72R090X
P1
P1
3.81
–/+ 0.7
7.62
–/+ 0.7
Ordinate to adjacent component lead*:
72R110X–72R300X
Lead spacing: 72R020X–72R185X
F
F
5.08
–/+ 0.8
Lead spacing: 72R250X–72R300X
F
F
10.18
–/+ 0.8
*Differs from EIA Specification
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 01/23/15
POLY-FUSE® Resettable PTCs
Radial Leaded > 72R Series
Tape and Ammo Diagram
Figure 1
∆h
∆h
∆h
∆p
Reference plane
A1
H1
F
A
L
B
H0
W4 W5
W
H1 C1
H C2
I2
L1
P0
D0
Direction of unreeling
Cross section A - B
t
Reel
Upper side
Direction
of
unreeling
Tape
Lower side
w1
w2
Cross section
Optional shape: Circular or polygonal
WARNING
• Users shall independently assess the suitability of these devices for each of their applications
• Operation of these devices beyond the stated maximum ratings could result in damage to the devices and lead to electrical arcing and/or fire
• These devices are intended to protect against the effects of temporary over-current or over-temperature conditions and are not intended to perform as protective devices where such
conditions are expected to be repetitive or prolonged in duration
• Exposure to silicon-based oils, solvents, electrolytes, acids, and similar materials can adversely affect the performance of these PPTC devices
• These devices undergo thermal expansion under fault conditions, and thus shall be provided with adequate space and be protected against mechanical stresses
• Circuits with inductance may generate a voltage (L di/dt) above the rated voltage of the PPTC device.
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 01/23/15