LAN E & F SERIES TO 1.8 WATTS 1.8 watt SIP for LAN Applications PRODUCT FEATURES • • • • • Ultra Miniature SIP: 7 and 12 Pin Compatible Three levels of I/O Isolation Available Single and Dual Outputs Low Reflected Ripple Current Regulated and Non-Regulated Versions THE LAN E AND F SERIES When board space is at a premium and voltage conversions require low power, the LAN E and LAN F Series, miniature converters, offer superior solutions for an economical cost. Between the two series you have a multitude of options and operational ratings to choose from in custom-tailoring the converter to the demands of the application. Populating 0.179 or 0.516 square inches of board space , the LAN E and F Series, respectively, provide up to 1.5 watts of power while maintaining specification over the entire commercial operation temperature range. SPECIFICATIONS: LAN E AND F SERIES All specifications apply @ +25 C ambient unless otherwise noted. INPUT SPECIFICATIONS GENERAL SPECIFICATIONS Input Voltage Range 5,12,15,24VDC LANE ±5% ......................................................LANF ±10% Input Filtering: LANE..................Low ESR Capacitors LANF ................................Pi Network Efficiency (Typical) Regulated ....................55 to 65% Non-Regulated ..................................70 to 85% Isolation Voltage (input to output) LAN E......1000VDC LAN F ................................500VDC or 3000VDC Switching Frequency ........................20kHz minimum OUTPUT SPECIFICATIONS Output Current ..........................................See table Voltage Tolerance..............±5%(nom. line 100% load) Regulation: Line: LAN E&F Non-Regulated ........±1.3%/% of Vin Line: LAN F Regulated ..................................±0.5% Load: LAN E&F Non-Regulated ..........(E=10%)±8% ........................................................(20-100% load) Load: LAN F Regulated ................................±0.5% Short Circuit Protection ............................Short Term Ripple/Noise (20MHz BW) Regulated:50mV p-p max. Non-Regulated ......100mV p-p max. ENVIRONMENTAL SPECIFICATIONS Operating Temperature ............................0 to +71°C Storage Temperature ..........................-40 to +100°C Cooling ......................................Free Air Convection PHYSICAL SPECIFICATIONS Dimensions LAN E ..................0.765 x 0.235 x 0.37” Dimensions - LAN F ....................1.29 x 0.40 x 0.55” Case Material ..............Non-Conductive Black Plastic Due to advances in technology, specifications subject to change without notice. 2/26/02 1 603 778 2300 WWW.WALLINDUSTRIES.COM LAN E & F SERIES TO 1.8 WATTS Input Voltage (VDC) Output Voltage (VDC) 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 12 12 12 12 12 12 12 12 12 12 12 12 12 12 15 15 15 15 15 15 15 15 15 15 15 15 15 15 24 24 24 24 24 24 24 24 24 24 24 24 24 24 5 5 9 12 12 15 15 24 ±5 ±5 ±12 ±12 ±15 ±15 ±15 5 5 9 12 12 15 15 24 ±5 ±5 ±12 ±12 ±15 ±15 5 5 9 12 12 15 15 24 ±5 ±5 ±12 ±12 ±15 ±15 5 5 9 12 12 15 15 24 ±5 ±5 ±12 ±12 ±15 ±15 Output Model Current Number (mA) (SEE NOTE 2) 200 300 170 85 125 66 100 65 100 100 42 60 33 40 50 200 300 170 85 125 60 100 65 100 100 42 60 33 50 200 300 170 85 125 66 100 65 100 100 42 60 33 50 200 300 170 85 125 66 100 65 100 100 42 60 33 50 LANE505N LANF505N LANF509N LANE512N LANF512N LANE515N LANF515N LANF524N LANE505ND LANF505ND LANE512ND LANF512ND LANE515ND LANE515ND1.2 LANF515ND LANE1205N LANF1205N LANF1209N LANE1212N LANF1212N LANE1215N LANF1215N LANF1224N LANE1205ND LANF1205ND LANE1212ND LANF1212ND LANE1215ND LANF1215ND LANE1505N LANF1505N LANF1509N LANE1512N LANF1512N LANE1515N LANF1515N LANF1524N LANE1505ND LANF1505ND LANE1512ND LANF1512ND LANE1515ND LANF1515ND LANE2405N LANF2405N LANF2409N LANE2412N LANF2412N LANE2415N LANF2415N LANF2424N LANE2405ND LANF2405ND LANE2412ND LANF2412ND LANE2415ND LANF2415ND PIN CONNECTIONS LAN E Single Dual 1 + Vin +Vin 2 -Vin -Vin 4 -Vout -Vout 5 Omitted Common 6 + Vout + Vout PIN CONNECTIONS LAN F “H OPTION” Single Dual 1 +Vin + Vin consult 2 -Vin NC factory 3 NC N/C for 9 -Vout NC Dual 10 -Vout - Vout Pin-out 11 + Vout + Vout 12 + Vout - Vin NOTES: 1. All case and pin-to-case dimensions reference only unless otherwise noted. 2. All LANF models can be regulated, substitute “R” for “N” in last digits of part number 3. Add”H” onto end of LANF part number for 3000VDC isolation. 2/26/02 WWW.WALLINDUSTRIES.COM 603 778 2300 2 LAN E & F SERIES TO 1.8 WATTS LAN E LAN F 2/26/02 3 603 778 2300 WWW.WALLINDUSTRIES.COM