Preface Since their development in the 1980s, IGBTs have become established as the standard component in many different power electronics applications. They cover a performance range from a few hundred watts to several megawatts. In the course of their development, different IGBTs have separated out into different packages so that, for example, there are now IGBTs as discrete components in, for example, TO-247 packages, IGBT in high-power modules, and complex designs that include both IGBTs and other electronic components and functions. The aim of this book is to make the basics specific to IGBTs as they interact with the application accessible to readers. In many published works, practical details and expert knowledge are often left out or are not presented in a way that clearly shows how they relate to the application. This book brings together detailed information about power electronics in relation to IGBTs, supplemented and complemented by our own experience in the field. After explaining the internal structure and the IGBT variants derived from the prototype or basic model, we then examine how the package technology is constructed. Then, the book discusses electrical and thermal matters, getting to grips with gate drives for IGBTs, including their specific application and parallel connection. This broad coverage of the applications also includes the practicalities of the switching behaviour of IGBTs, basic circuit arrangements, application examples, and rules of design. To complement that, we also look at measurement engineering and signal electronics. The conclusion deals with the requirements of IGBTs and IGBT modules in terms of quality and reliability. In presenting each chapter, we have tried as far as possible to present information visually and avoid using more equations than necessary. There are more than 500 figures and tables. However, equations are used if they are the best way to explain basic principles or are relevant to the everyday use of IGBTs. We hope thereby to have achieved a good balance between pure theory and practice-oriented application. We owe a particular debt of thanks to our families and friends, as work on this book – during our already limited leisure time – took several years. We would also like to thank Professor Leo Lorenz, Jost Wendt, Hubert Ludwig and Martin Hierholzer, as well as Infineon Technologies, for their support in making this book a reality. Warstein, summer 2010 Andreas Volke Michael Hornkamp Although utmost care has been taken to ensure accuracy in presentation and content, no work can claim to be error-free and complete. Therefore, suggestions for improvement are cordially welcomed. Preface The arrival and consistent development of MOS-controlled power semiconductor components has helped the entire field of power electronics towards a breakthrough regarding high power density and system efficiency. It has also improved reliability and made economical technical solutions possible. The key technology, facilitating the wide power range of a few tens of watts up to the region of many megawatts, has been the IGBT (insulated gate bipolar transistor), the exceptional technical properties of which mean that it has replaced all previous fully controllable power semiconductor components in existing systems and opened up completely new fields of application. However, a fundamental understanding of component technology, the requirements of the fields of application and operation, and tried and tested designs for the drive and protection functions, are essential for fail-safe and reliable operation across the entire power range, and in order to take the optimisation of system costs into account. An analysis of the literature currently available reveals a large number of highly qualified papers and books on the topic of power electronics converters, switching topologies and systems, and several comprehensive works that present the semiconductor physics and cellular structures of the major new power semiconductor components both in theory and from the technological and realisation point of view. What makes this book unique is that it is tailor-made to fill the gap that still existed between semiconductor physics and power electronics systems technology, and provides valuable support to users of these components. Given the work done in this area over the last twenty years, the two authors, who were involved in applying and spreading this new technology, deserve special commendation: They did not balk at the effort of putting all the knowledge gathered so far in readable form. By fortunate coincidence, both authors have been involved in developing innovative application guidelines for the whole spectrum of power IGBTs and are familiar with – indeed helped to shape – major drive and protection designs, measurement methods for high performance IGBTs and many applications. This book will provide students of power electronics with valuable information about the main contemporary power semiconductor components and their application while development engineers targeting power electronic converters will find all the essentials of selecting, dimensioning and applying IGBT modules laid out clearly and comprehensively. I would like to thank the authors for their hard work and express my hope that this book will become a new milestone and a standard work in the development of energy electronics. Munich, summer 2010 Professor Leo Lorenz IEEE Fellow Member of the Academy of Science Contents 1 Power semiconductors.......................................................................................... 1 1.1 Introduction ....................................................................................................... 1 1.1.1 Intrinsic charge carrier concentration ......................................................... 2 1.1.2 Doping ....................................................................................................... 6 1.1.3 Charge carrier movement in the semiconductor ........................................ 8 1.1.4 Charge carrier generation and recombination.......................................... 11 1.1.5 pn-junction ............................................................................................... 13 1.1.6 Breakdown ............................................................................................... 17 1.1.7 Manufacturing process ............................................................................ 18 1.2 Diodes ............................................................................................................. 23 1.2.1 Fast recovery diodes ............................................................................... 24 1.2.2 Mains (rectifier) diodes ............................................................................ 26 1.2.3 Schottky diodes ....................................................................................... 26 1.2.4 Z-diodes and avalanche diodes ............................................................... 28 1.3 Thyristors ........................................................................................................ 30 1.4 Bipolar junction and field effect transistors...................................................... 31 1.4.1 Bipolar junction transistors (BJTs) ........................................................... 31 1.4.2 Field effect transistors (FETs) .................................................................. 34 1.4.2.1 Junction field effect transistors (JFETs) ............................................ 34 1.4.2.2 Metal oxide semiconductor field effect transistors (MOSFETs) ........ 35 1.4.2.3 Superjunction MOSFETs .................................................................. 38 1.5 Insulated gate bipolar transistors (IGBTs)....................................................... 39 1.5.1 Punch through (PT) IGBTs ...................................................................... 46 1.5.2 Non-punch through (NPT) IGBTs ............................................................ 48 1.5.3 Fieldstop (FS) IGBTs ............................................................................... 49 1.5.4 Trench IGBTs .......................................................................................... 50 TM 1.5.5 CSTBT ................................................................................................. 52 1.5.6 IEGTs ...................................................................................................... 53 1.5.7 Trench-FS IGBTs ..................................................................................... 54 1.5.8 RC IGBTs ................................................................................................ 55 1.5.9 Integrated additional functions ................................................................. 55 1.6 Outlook ........................................................................................................... 58 1.7 Manufacturers ................................................................................................. 62 1.8 References ..................................................................................................... 63 2 Construction of IGBT components..................................................................... 66 2.1 Introduction ..................................................................................................... 66 2.2 Materials for the construction of IGBT modules .............................................. 67 2.2.1 Plastic frame ............................................................................................ 68 2.2.2 Substrates................................................................................................ 69 2.2.3 Baseplate ................................................................................................. 71 2.2.4 Moulding compound, epoxy resin and silicone gels ................................. 72 2.3 Electrical bonding technology ......................................................................... 74 2.3.1 Internal connection technology ................................................................ 74 2.3.1.1 Chip soldering ................................................................................... 75 2.3.1.2 System soldering .............................................................................. 75 2.3.1.3 Ultrasonic bonding ............................................................................ 75 2.3.1.4 Soldering .......................................................................................... 78 2.3.1.5 Ultrasonic welding ............................................................................ 79 2.3.1.6 Low temperature joining ................................................................... 82 2.3.1.7 Diffusion soldering ............................................................................ 82 Contents 2.3.2 External bonding technology .................................................................... 83 2.3.2.1 The fritting effect ............................................................................... 83 2.3.2.2 Screw connection .............................................................................. 84 2.3.2.3 Solder connection ............................................................................. 86 2.3.2.4 Plug connections ............................................................................... 87 2.3.2.5 Press-in technology........................................................................... 88 2.3.2.6 Spring contact ................................................................................... 92 2.4 Design concepts .............................................................................................. 94 2.4.1 Standard IGBT modules ........................................................................... 94 2.4.2 Press pack IGBTs .................................................................................... 94 2.4.3 Intelligent power modules (IPMs) ............................................................. 95 2.4.4 IGBT moulded modules............................................................................ 97 2.4.5 Discrete IGBTs ......................................................................................... 99 2.4.6 Stacks ...................................................................................................... 99 2.5 Internal parallel connection of semiconductors.............................................. 100 2.6 Low inductance design .................................................................................. 103 2.7 Circuit topologies in IGBT modules ............................................................... 104 2.8 Insulation coordination .................................................................................. 107 2.8.1 Clearance and creepage distances ........................................................ 108 2.8.2 Insulation voltage ................................................................................... 111 2.8.3 Partial discharge .................................................................................... 112 2.9 Overview of manufactures ............................................................................. 113 2.10 References ................................................................................................ 115 3 Electrical properties ........................................................................................... 117 3.1 Introduction.................................................................................................... 117 3.1.1 Definition of terms .................................................................................. 118 3.1.1.1 Voltages .......................................................................................... 118 3.1.1.2 Currents .......................................................................................... 119 3.1.1.3 Times .............................................................................................. 119 3.1.1.4 Temperatures .................................................................................. 121 3.1.1.5 Energies .......................................................................................... 122 3.1.1.6 Modulation factor............................................................................. 125 3.2 Forward characteristics of the diode.............................................................. 127 3.3 Diode switching characteristics ..................................................................... 130 3.3.1 Diode turn-on ......................................................................................... 130 3.3.2 Diode turn-off ......................................................................................... 132 3.4 IGBT forward characteristics ......................................................................... 137 3.4.1 Forward characteristics at low temperatures .......................................... 139 3.5 IGBT switching characteristics ...................................................................... 140 3.5.1 IGBT turn-on .......................................................................................... 140 3.5.2 IGBT turn-off .......................................................................................... 143 3.5.3 Gate charge and Miller effect ................................................................. 145 3.5.4 Turn-off behaviour NPT versus Trench IGBT switching characteristics . 147 3.6 Short circuit behaviour ................................................................................... 148 3.7 Blocking behaviour ........................................................................................ 151 3.8 Static and dynamic avalanche breakdown .................................................... 152 3.9 Stray inductance............................................................................................ 155 3.10 Different manufacturing sources ................................................................ 158 3.11 References ................................................................................................ 159 4 Thermal principles.............................................................................................. 161 Contents 4.1 Introduction ................................................................................................... 161 4.1.1 Definitions .............................................................................................. 161 4.1.1.1 Temperatures ................................................................................. 161 4.1.1.2 Power ............................................................................................. 161 4.1.1.3 Thermal resistances and impedances ............................................ 162 4.1.2 Thermal conduction ............................................................................... 163 4.1.2.1 Thermal resistance ......................................................................... 163 4.1.2.2 Thermal capacity ............................................................................ 164 4.1.2.3 Thermal impedance ........................................................................ 166 4.1.2.4 Thermal lateral spread .................................................................... 167 4.1.3 Thermal radiation ................................................................................... 169 4.1.4 Convection ............................................................................................. 172 4.2 Materials and their thermal properties........................................................... 173 4.2.1 Thermal Interface Material (TIM) ........................................................... 176 4.3 Thermal model .............................................................................................. 178 4.4 Heatsink ........................................................................................................ 185 4.4.1 Air coolers .............................................................................................. 186 4.4.2 Liquid cooling system ............................................................................ 187 4.5 References ................................................................................................... 190 5 Module datasheet ............................................................................................... 191 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 5.10 5.11 6 Introduction ................................................................................................... 191 IGBT ............................................................................................................. 192 Freewheeling diodes ..................................................................................... 195 Rectifier diodes (PIM/CIB modules) .............................................................. 196 Brake chopper (PIM/CIB modules) ............................................................... 197 NTC resistor (optional) .................................................................................. 197 Module .......................................................................................................... 198 Diagrams ...................................................................................................... 199 Circuit topologies .......................................................................................... 200 Package (case) drawing ............................................................................ 200 References ................................................................................................ 201 IGBT Driver ......................................................................................................... 202 6.1 Introduction ................................................................................................... 202 6.2 Signal transmission ....................................................................................... 203 6.2.1 Level shifter ........................................................................................... 204 6.2.2 Optocouplers ......................................................................................... 208 6.2.3 Pulse transformers ................................................................................. 210 6.2.4 Capacitive couplers ............................................................................... 213 6.2.5 Fibre optics ............................................................................................ 214 6.2.6 Summary ............................................................................................... 216 6.3 IGBT gate drives ........................................................................................... 217 6.3.1 Voltage source drivers ........................................................................... 218 6.3.1.1 H-bridge circuit ............................................................................... 218 6.3.1.2 Emitter follower in the gate path ..................................................... 219 6.3.1.3 Emitter follower in the emitter path ................................................. 221 6.3.1.4 MOSFET push-pull gate drives ....................................................... 222 6.3.1.5 MOSFET source followers .............................................................. 224 6.3.1.6 n-channel push-pull drives .............................................................. 225 6.3.1.7 IGBT gate boosting ......................................................................... 226 Contents 6.3.1.8 Design of the gate drives ................................................................ 227 6.4 Driver voltage supply ..................................................................................... 229 6.4.1 Bootstrap circuit ..................................................................................... 230 6.4.2 DC/DC converters .................................................................................. 233 6.4.2.1 Flyback converters .......................................................................... 234 6.4.2.2 Push-pull converters ....................................................................... 236 6.4.2.3 Push-pull converters in half-bridge configuration ............................ 236 6.4.3 Under-voltage lock-out (UVLO) .............................................................. 237 6.5 Coupling capacitances .................................................................................. 238 6.6 Influencing the switching behaviour............................................................... 240 6.6.1 Gate resistor........................................................................................... 240 6.6.2 External gate-emitter capacitor CG ......................................................... 243 6.6.3 Gate lead inductance ............................................................................. 246 6.7 Protective measures ...................................................................................... 247 6.7.1 UCEsat monitoring .................................................................................... 247 6.7.1.1 Inadvertent tripping of the UCEsat monitoring .................................... 254 6.7.1.2 UCEsat monitoring with capacitive loads ........................................... 255 6.7.2 Collector-emitter clamping (Active Clamping) ........................................ 256 6.7.2.1 Conditional Active Clamping ........................................................... 260 6.7.2.2 Dynamic voltage rise control (DVRC).............................................. 263 6.7.2.3 Dynamic Active Clamping ............................................................... 267 6.7.3 Gate clamping ........................................................................................ 269 6.7.4 Miller clamping ....................................................................................... 273 6.7.5 Utilising the parasitic emitter inductance ................................................ 275 6.7.6 Two-level turn-off (TLTO) ....................................................................... 276 6.7.7 Soft shutdown ........................................................................................ 278 6.8 Logic functions .............................................................................................. 279 6.8.1 Minimum pulse suppression ................................................................... 280 6.8.2 Dead-time generation and half-bridge interlocking ................................. 280 6.8.3 Error messages, blocking times and fault memory................................. 281 6.9 Safe Stop....................................................................................................... 282 6.10 Parallel and series connection ................................................................... 284 6.10.1 Connection in parallel ............................................................................. 284 6.10.2 Connection in series ............................................................................... 285 6.11 Three-level NPC circuits ............................................................................ 286 6.12 Selecting a driver by performance and cost ............................................... 287 6.13 Overview of manufacturers ........................................................................ 287 6.14 References ................................................................................................ 288 7 Switching behaviour in the application ............................................................ 290 7.1 Introduction.................................................................................................... 290 7.2 IGBT control voltage ...................................................................................... 290 7.2.1 Positive control voltage .......................................................................... 290 7.2.2 Negative control voltage and switching with 0V ..................................... 291 7.2.2.1 Parasitic turn-on caused by the Miller capacitance ......................... 293 7.2.2.2 Parasitic turn-on caused by the emitter stray inductance ................ 294 7.3 Minimal on-times ........................................................................................... 295 7.4 Dead-time (interlock delay time) .................................................................... 297 7.5 Switching speeds .......................................................................................... 299 7.6 Turning off short circuits ................................................................................ 301 7.7 Influence of the stray inductance ................................................................... 306 Contents 7.7.1 Stray inductance in the commutation path ............................................. 306 7.7.2 Stray inductance in the gate path .......................................................... 308 7.8 Safe operating area (SOA) ........................................................................... 310 7.8.1 IGBT RBSOA and SCSOA .................................................................... 310 7.8.2 Diode SOA ............................................................................................. 311 7.9 IGBT reverse blocking voltage ...................................................................... 312 7.10 Si IGBT with SiC freewheeling diode......................................................... 312 7.11 Load reduced switching and (quasi-) resonant switching .......................... 315 7.11.1 Operation with a snubber ....................................................................... 316 7.11.2 Resonant switching................................................................................ 321 7.12 References ................................................................................................ 323 8 Connecting IGBT modules in parallel and in series........................................ 324 8.1 Introduction ................................................................................................... 324 8.2 Parallel connection........................................................................................ 325 8.2.1 Notes on static operation ....................................................................... 326 8.2.2 Notes on dynamic operation .................................................................. 329 8.2.3 Gate drive in parallel connection............................................................ 334 8.2.3.1 Direct gate drive in parallel connection ........................................... 334 8.2.3.2 Indirect gate drive in parallel connection......................................... 337 8.2.3.3 Galvanically isolated gate drive in parallel connection .................... 339 8.2.4 Balancing in parallel connection through external components ............. 341 8.3 Series connection ......................................................................................... 344 8.4 References ................................................................................................... 348 9 RF oscillations.................................................................................................... 349 9.1 9.2 9.3 9.4 9.5 10 Introduction ................................................................................................... 349 Short circuit oscillations ................................................................................ 350 Oscillations during IGBT turn-off ................................................................... 351 Tail current oscillations ................................................................................. 352 References ................................................................................................... 355 Mechanical handling and mounting.............................................................. 356 10.1 Introduction................................................................................................ 356 10.2 Connection techniques .............................................................................. 356 10.2.1 Electrical connections ............................................................................ 356 10.2.2 Heatsink assembly and thermal grease ................................................. 357 10.2.3 Mounting directly cooled modules.......................................................... 363 10.3 Environmental influences .......................................................................... 365 10.3.1 Mechanical loads ................................................................................... 365 10.3.2 Gases and fluids .................................................................................... 366 10.4 Transport and storage ............................................................................... 367 10.5 References ................................................................................................ 368 11 Basic circuits and application examples...................................................... 369 11.1 Introduction................................................................................................ 369 11.2 AC/DC rectifier and brake chopper............................................................ 371 11.2.1 Active Front End (AFE) .......................................................................... 378 11.2.2 Vienna Rectifier ..................................................................................... 380 11.3 DC/DC converter ....................................................................................... 382 11.3.1 Buck converter ....................................................................................... 382 Contents 11.3.2 Boost converter ...................................................................................... 384 11.3.3 Buck-boost converter ............................................................................. 385 11.3.4 H-bridge ................................................................................................. 387 11.4 DC/AC inverter........................................................................................... 388 11.4.1 Voltage source inverter (VSI) ................................................................. 388 11.4.2 Multi-level inverter .................................................................................. 391 11.4.3 Current source inverter (CSI) ................................................................. 396 11.4.4 Z-inverter ................................................................................................ 397 11.5 AC/AC converter ........................................................................................ 402 11.6 Sample applications ................................................................................... 404 11.6.1 Servo drives ........................................................................................... 404 11.6.2 Uninterruptible power supply (UPS) ....................................................... 405 11.6.3 Solar power inverter ............................................................................... 407 11.6.4 Wind power inverter ............................................................................... 408 11.6.5 Traction inverter ..................................................................................... 410 11.6.6 Switched reluctance motor ..................................................................... 412 11.6.7 Medium-voltage inverter ......................................................................... 413 11.7 References ................................................................................................ 414 12 Measurements and signal electronics .......................................................... 416 12.1 Introduction ................................................................................................ 416 12.2 Digital storage oscilloscope (DSO) ............................................................ 416 12.3 Measuring current ...................................................................................... 419 12.3.1 Non-magnetic measurement of current .................................................. 420 12.3.1.1 Current measuring resistors (Shunts) ............................................. 420 12.3.1.2 Current Sense IGBTs ...................................................................... 425 12.3.1.3 Sigma/Delta-ADC ............................................................................ 426 12.3.2 Magnetic measurement of current .......................................................... 431 12.3.2.1 Current transformers (CT) ............................................................... 432 12.3.2.2 Rogowski coil .................................................................................. 433 12.3.2.3 Hall sensors .................................................................................... 435 12.4 Measuring voltage ..................................................................................... 440 12.5 Measuring temperature .............................................................................. 443 12.6 Double pulse test ....................................................................................... 450 12.7 References ................................................................................................ 454 13 Inverter design ................................................................................................ 456 13.1 Introduction ................................................................................................ 456 13.2 Functional inverter components ................................................................. 456 13.3 Voltage ratings ........................................................................................... 458 13.4 Parasitic components................................................................................. 459 13.5 DC-bus....................................................................................................... 460 13.6 Snubber capacitors .................................................................................... 463 13.7 Positioning the driver unit........................................................................... 466 13.8 Clearance and creepage distances ........................................................... 468 13.9 Influence of long motor cables ................................................................... 468 13.10 Filters ......................................................................................................... 472 13.10.1 Mains filter .......................................................................................... 473 13.10.2 DC-bus filter........................................................................................ 473 13.10.3 Output filter ......................................................................................... 474 13.11 Fuses ......................................................................................................... 476 Contents 13.12 Influence of the modulation algorithm........................................................ 479 13.13 Fundamental equations ............................................................................. 484 13.13.1 Input rectifier ...................................................................................... 484 13.13.2 Output inverter ................................................................................... 484 13.13.3 DC-bus ............................................................................................... 485 13.14 References ................................................................................................ 485 14 Quality and reliability ..................................................................................... 487 14.1 Introduction................................................................................................ 487 14.1.1 Failure rate, FIT, MTBF and ppm........................................................... 487 14.2 Failure mechanisms in the application ...................................................... 489 14.3 Acceleration models .................................................................................. 490 14.4 Type tests and routine tests ...................................................................... 496 14.4.1 HTRB Test ............................................................................................. 497 14.4.2 HTGS Test ............................................................................................. 498 14.4.3 H3TRB Test ........................................................................................... 498 14.4.4 TST ........................................................................................................ 499 14.4.5 TC Test .................................................................................................. 499 14.4.6 PC Test .................................................................................................. 501 14.5 Measures to improve the load cycle capability .......................................... 504 14.5.1 Matching the CTE values ....................................................................... 504 14.5.2 DCB ....................................................................................................... 504 14.5.3 Low temperature joining ........................................................................ 505 14.5.4 Diffusion soldering for the chip solder layer ........................................... 507 14.5.5 Improved system solder layer ................................................................ 507 14.5.6 Direct bond ceramics to baseplate......................................................... 508 14.5.7 Copper bond wires................................................................................. 509 14.6 Lifetime calculation .................................................................................... 511 14.7 Failure images ........................................................................................... 515 14.7.1 Failure images of process engineering and mechanics ......................... 515 14.7.2 Electrically and thermally induced failure images .................................. 517 14.8 Cosmic particle radiation ........................................................................... 517 14.9 References ................................................................................................ 520 Abbreviations ............................................................................................................ 522 Index ........................................................................................................................... 525