MVR-H Series Metal Oxide Varistors High Temperature Application (up to 125°C) ( High Temperature ) MERITEK RoHS FEATURES RoHS & Halogen-free compliant Body size: Φ5mm~Φ20mm Wide continuous voltage range: 130VAC~465VAC Operating temperature range : -40°C~+125°C Storage temperature range: -40°C~+150°C Comply with UL1449 3rd SPD Type 5 APPLICATIONS Power supply Home appliance Industrial equipment LED driver Photovoltaic industry E326004 PART NUMBER SYSTEM MVR 05 D 471 K Y RA -H Meritek Series Element Diameter Code Value 05 Φ5mm 07 Φ7mm 40043602 Coating : silicon Packaging 10 14 20 Φ10mm Φ14mm Φ20mm Code Type Element Type : Disk Varistor Voltage ( V1mA ) First two digits are significant figures, Third digit denotes number of zeros, ‘R’denotes decimal point for value less 10 V Blank RA RB Tape&Reel Tape&Reel (hole pitch 12.7mm) (hole pitch 15.0mm) C AA AB Tape&Ammo Tape&Ammo Bulk & Cut Lead (hole pitch 12.7mm) (hole pitch 15.0mm) Bulk Lead Type Code Type Tolerance of V1mA : K – ±10% Blank Straight Lead Y Y Kink Lead DIMENSIONS STRAIGHT LEAD Dim BD LL, min. LD LS BH, max. 05D 5.0~7.5 26.5 0.6±0.02 5.0±1.0 9.0 07D 6.4~9.6 26.5 0.6±0.02 5.0±1.0 11.0(07D201~621) 11.5(07D681~751) 10D 9.6~14.4 26.5 0.8±0.02 7.5±1.0 15.0(10D201~751) 14D 12.0~18.0 26.5 0.8±0.02 7.5±1.0 18.5(14D201~511) 19.0(14D561~751) 20D 16.8~25.2 22.5 1.0±0.02 10.0±1.0 25.5(20D201~511) 26.0(20D561~751) All Dimension in mm BT, LW refer to specification table Y-KINK LEAD Dim BD LL, min. LD LS BH, max. 05D 5.0~7.5 20.0 0.6±0.02 5.0±1.0 9.5 07D 6.4~9.6 20.0 0.6±0.02 5.0±1.0 14.5 10D 9.6~14.4 20.0 0.8±0.02 7.5±1.0 16.0 14D 12.0~18.0 20.0 0.8±0.02 7.5±1.0 19.0 20D 16.8~25.2 20.0 1.0±0.02 10.0±1.0 29.5 All Dimension in mm BT, refer to specification table LL is suggested to 3.5±0.5mm, if customer needs short lead (cut lead) Rev. 7 MVR-H Series Metal Oxide Varistors High Temperature Application (up to 125°C) ( High Temperature ) MERITEK RoHS SPECIFICATIONS MVR05D Parameter Symbol Value Maximum surge current (8/20us) IMAX 400A 1 Nominal discharge current In 100A Rated power P 0.1W NOTE: rd 1. Nominal discharge current is the specification defined in UL 1449 3 and use 8/20us current waveform to test varistor Varistor voltage Max. continuous voltage Max. clamping voltage Max. energy Reference capacitance V (@1mADC) V V V I (8/20us) W (10/1000us) Cp (@1kHz) 1mA AC(rms) DC P P MAX Part number MVR05D (V) (V) (V) (V) (A) (J) (pF) 201-H 200 (180~220) 130 170 355 5 3.5 65 221-H 220 (198~242) 140 180 385 5 8.5 60 241-H 240 (216~264) 150 200 415 5 9.0 55 271-H 270 (243~297) 175 225 475 5 10.5 50 301-H 300 (270~330) 195 250 525 5 11 50 331-H 330 (297~363) 215 275 585 5 13 45 361-H 360 (324~396) 230 300 620 5 16 45 391-H 390 (351~429) 250 320 675 5 17 40 431-H 430 (387~473) 275 350 745 5 20 35 471-H 470 (423~517) 300 385 810 5 21 30 511-H 510 (459~561) 320 410 878 5 16 30 561-H 560 (504~616) 350 450 962 5 18 30 621-H 620 (558~682) 395 510 1050 5 18 25 Dimension BT LW±1.0 (mm) 3.20~4.80 1.5 3.36~5.04 1.5 3.44~5.16 1.6 3.52~5.28 1.7 3.60~5.40 1.9 3.76~5.64 2.0 3.92~5.88 2.1 4.00~6.00 2.3 4.16~6.24 2.3 4.24~6.36 2.4 4.40~6.60 2.6 4.56~6.84 2.8 4.88~7.32 3.0 MVR07D Parameter Symbol Value Maximum surge current (8/20us) IMAX 1750A 1 Nominal discharge current In 500A Rated power P 0.25W NOTE: rd 1. Nominal discharge current is the specification defined in UL 1449 3 and use 8/20us current waveform to test varistor Varistor voltage Max. continuous voltage Max. clamping voltage Max. energy Reference capacitance V (@1mADC) V V V I (8/20us) W (10/1000us) Cp (@1kHz) 1mA AC(rms) DC P P MAX Part number MVR07D (V) (V) (V) (V) (A) (J) (pF) 201-H 200 (180~220) 130 170 340 10 17.5 140 221-H 220 (198~242) 140 180 360 10 19 130 241-H 240 (216~264) 150 200 395 10 21 120 271-H 270 (243~297) 175 225 455 10 24 110 301-H 300 (270~330) 195 250 500 10 26 105 331-H 330 (297~363) 215 275 550 10 28 100 361-H 360 (324~396) 230 300 595 10 32 95 391-H 390 (351~429) 250 320 650 10 35 85 431-H 430 (387~473) 275 350 710 10 40 80 471-H 470 (423~517) 300 385 775 10 42 70 511-H 510 (459~561) 320 410 845 10 45 65 561-H 560 (504~616) 350 450 930 10 45.5 60 621-H 620 (558~682) 395 510 1020 10 50 55 681-H 680 (612~748) 420 560 1120 10 50.5 50 751-H 750 (675~825) 465 615 1235 10 51 45 Dimension BT LW±1.0 (mm) 3.20~4.80 1.5 3.28~4.92 1.5 3.44~5.16 1.6 3.52~5.28 1.7 3.60~5.40 1.9 3.76~5.64 2.0 3.92~5.88 2.1 4.00~6.00 2.3 4.16~6.24 2.3 4.24~6.36 2.4 4.40~6.60 2.6 4.56~6.84 2.8 4.88~7.32 3.0 5.04~7.56 3.2 5.20~7.80 3.5 Rev. 7 MVR-H Series Metal Oxide Varistors High Temperature Application (up to 125°C) ( High Temperature ) MERITEK RoHS MVR10D Parameter Symbol Value Maximum surge current (8/20us) IMAX 3500A 1 Nominal discharge current In 1000A Rated power P 0.4W NOTE: rd 1. Nominal discharge current is the specification defined in UL 1449 3 and use 8/20us current waveform to test varistor Varistor voltage Max. continuous voltage Max. clamping voltage Max. energy Reference capacitance VAC(rms) VDC VP IP (8/20us) WMAX (10/1000us) Cp (@1kHz) Part number V1mA(@1mADC) MVR10D (V) (V) (V) (V) (A) (J) (pF) 201-H 200 (180~220) 130 170 340 25 35 290 221-H 220 (198~242) 140 180 360 25 39 270 241-H 240 (216~264) 150 200 395 25 42 240 271-H 270 (243~297) 175 225 455 25 49 230 301-H 300 (270~330) 195 250 500 25 53 210 331-H 330 (297~363) 215 275 550 25 58 200 361-H 360 (324~396) 230 300 595 25 65 190 391-H 390 (351~429) 250 320 650 25 70 175 431-H 430 (387~473) 275 350 710 25 80 160 471-H 470 (423~517) 300 385 775 25 85 150 511-H 510 (459~561) 320 410 845 25 92 130 561-H 560 (504~616) 350 450 930 25 92 120 621-H 620 (558~682) 395 510 1020 25 92 110 681-H 680 (612~748) 420 560 1120 25 92 100 751-H 750 (675~825) 465 615 1235 25 100 90 Dimension BT LW±1.0 (mm) 3.60~5.40 1.7 3.68~5.52 1.7 3.84~5.76 1.8 3.92~5.88 1.9 4.00~6.00 2.1 4.16~6.24 2.2 4.24~6.36 2.3 4.32~6.48 2.5 4.40~6.60 2.5 4.64~6.96 2.6 4.88~7.32 2.8 4.96~7.44 3.0 5.12~7.68 3.2 5.28~7.92 3.4 5.44~8.16 3.7 MVR14D Parameter Symbol Value Maximum surge current (8/20us) IMAX 6000A 1 Nominal discharge current In 3000A Rated power P 0.6W NOTE: rd 1. Nominal discharge current is the specification defined in UL 1449 3 and use 8/20us current waveform to test varistor Varistor voltage Max. continuous voltage Max. clamping voltage Max. energy Reference capacitance VAC(rms) VDC VP IP (8/20us) WMAX (10/1000us) Cp (@1kHz) Part number V1mA(@1mADC) MVR14D (V) (V) (V) (V) (A) (J) (pF) 201-H 200 (180~220) 130 170 340 50 70 700 221-H 220 (198~242) 140 180 360 50 78 640 241-H 240 (216~264) 150 200 395 50 84 580 271-H 270 (243~297) 175 225 455 50 99 520 301-H 300 (270~330) 195 250 500 50 105 480 331-H 330 (297~363) 215 275 550 50 115 450 361-H 360 (324~396) 230 300 595 50 130 430 391-H 390 (351~429) 250 320 650 50 140 390 431-H 430 (387~473) 275 350 710 50 155 370 471-H 470 (423~517) 300 385 775 50 175 320 511-H 510 (459~561) 320 410 845 50 190 290 561-H 560 (504~616) 350 450 930 50 190 260 621-H 620 (558~682) 395 510 1020 50 190 240 681-H 680 (612~748) 420 560 1120 50 190 230 751-H 750 (675~825) 465 615 1235 50 210 220 Dimension BT LW±1.0 (mm) 3.60~5.40 1.7 3.68~5.52 1.7 3.84~5.76 1.8 3.92~5.88 1.9 4.00~6.00 2.1 4.16~6.24 2.2 4.24~6.36 2.3 4.32~6.48 2.5 4.40~6.60 2.5 4.64~6.96 2.6 4.88~7.32 2.8 4.96~7.44 3.0 5.12~7.68 3.2 5.28~7.92 3.4 5.44~8.16 3.7 Rev. 7 MVR-H Series Metal Oxide Varistors High Temperature Application (up to 125°C) ( High Temperature ) MERITEK RoHS MVR20D Parameter Symbol Value Maximum surge current (8/20us) IMAX 10000A 1 Nominal discharge current In 5000A Rated power P 1.0W NOTE: rd 1. Nominal discharge current is the specification defined in UL 1449 3 and use 8/20us current waveform to test varistor Varistor voltage Max. continuous voltage Max. clamping voltage Max. energy Reference capacitance VAC(rms) VDC VP IP (8/20us) WMAX (10/1000us) Cp (@1kHz) Part number V1mA(@1mADC) MVR20D (V) (V) (V) (V) (A) (J) (pF) 201-H 200 (180~220) 130 170 340 100 140 1460 221-H 220 (198~242) 140 180 360 100 155 1320 241-H 240 (216~264) 150 200 395 100 168 1200 271-H 270 (243~297) 175 225 455 100 190 1100 301-H 300 (270~330) 195 250 500 100 210 1000 331-H 330 (297~363) 215 275 550 100 228 950 361-H 360 (324~396) 230 300 595 100 255 900 391-H 390 (351~429) 250 320 650 100 275 800 431-H 430 (387~473) 275 350 710 100 303 700 471-H 470 (423~517) 300 385 775 100 350 620 511-H 510 (459~561) 320 410 845 100 382 530 561-H 560 (504~616) 350 450 930 100 382 480 621-H 620 (558~682) 395 510 1020 100 382 450 681-H 680 (612~748) 420 560 1120 100 382 440 751-H 750 (675~825) 465 615 1235 100 420 420 Dimension BT LW±1.0 (mm) 3.84~5.76 1.9 3.92~5.88 1.9 4.08~6.12 2.0 4.16~6.24 2.1 4.24~6.36 2.3 4.32~6.48 2.4 4.40~6.60 2.5 4.48~6.72 2.7 4.56~6.84 2.7 4.88~7.32 2.8 5.12~7.68 3.0 5.20~7.80 3.2 5.36~8.04 3.4 5.52~8.28 3.6 5.68~8.52 3.9 Rev. 7