6205 SERIES 1/2 In. Dia. Bushing Mount PRECISION POSITION SENSORS STANDARD PRODUCT OFFERING MS PART NUMBER RESISTANCE 6205-1000-030 6205-1002-030 6205-1003-030 1KΩ ±10% 5KΩ ±10% 10KΩ ±10% 3/8-32UNEF-2A THREADED AVAILABLE IN SINGLE-GANG ONLY MOUNTING HARDWARE FURNISHED .375 .015 .1249 .1245 .500 .005 .4062 PILOT .4052 STANDARD MODEL ELECTRICAL CHARACTERISTICS RESISTANCE: ACTIVE ELECTRICAL ANGLE: ELECTRICAL CONTINUITY ANGLE: INDEPENDENT LINEARITY: END VOLTAGE: VOLTAGE RESOLUTION: OUTPUT SMOOTHNESS: RESISTANCE TEMP. COEFFICIENT: POWER RATING @ 70°C: WIPER CONTACT CURRENT: DIELECTRIC STRENGTH: INSULATION RESISTANCE: .687 .032 1kΩ to 10kΩ ±10% 325° 330° MIN. ±1.0% 1.0% MAX. VIRTUALLY INFINITE 0.1% MAX. 400PPM/°C MAX. 0.5 WATT MAX. 10 MilliAmps MAX. 500 VRMS @ 60Hz 100 MegΩ MIN. @ 500VDC .150 MAX. .500 MAX. STANDARD ENVIRONMENTAL CHARACTERISTICS OPERATING TEMP. RANGE: ROTATIONAL OPERATING LIFE: -65°C To +125°C 50 x 10 6 REVOLUTIONS MIN. SCHEMATIC DIAGRAM 2 STANDARD MODEL MECHANICAL CHARACTERISTICS MECHANICAL ROTATION: STARTING TORQUE: RUNNING TORQUE: TOTAL WEIGHT: PILOT RUNOUT: SHAFT RUNOUT: SHAFT END PLAY: SHAFT RADIAL PLAY: LATERAL RUNOUT: .25 B.C. .062 .005 CW CONTINUOUS 0.20 Oz.-In. MAX. 0.15 Oz.-In. MAX. 0.5 Oz. MAX. 0.001 In. TIR 0.001 In. TIR 0.003 MAX. 0.001 In. TIR 0.002 In. TIR 3 1 VIEWED FROM SHAFT END ALL OTHER GENERAL REQUIREMENTS IN ACCORDANCE WITH MIL-PRF-39023 STANDARD MATERIALS OF CONSTRUCTION HOUSING: SHAFT AND BALL BEARINGS: RESISTANCE ELEMENT: ELECTRICAL CONTACTS: SOLDER TERMINALS: ANODIZED ALUMINUM STAINLESS STEEL CO-MOLDED CONDUCTIVE PLASTIC MULTI-FINGER PRECIOUS METAL GOLD PLATED BRASS Position Sensor Products precisionsensors.meas-spec.com 424 Crown Point Circle, Grass Valley, CA 95945 Ph: 530.273.4608 Fax: 530.273.0769 8-7-13 www.meas-spec.com 6205 SERIES 1/2 In. Dia. Bushing Mount PRECISION POSITION SENSORS ANODIZED ALUMINUM HOUSING SHAFT INSULATOR WELDED MULTI-FINGER PRECIOUS METAL CONTACTS TURRET-STYLE REAR SOLDER TERMINALS STAINLESS STEEL PRECISION SHAFT CO-MOLDED RESISTANCE ELEMENT STAINLESS STEEL PRECISION BALL BEARINGS STANDARD ELECTRICAL CHARACTERISTICS RESISTANCES (±10%): ACTIVE ELECTRICAL ANGLE: ELECTRICAL CONTINUITY ANGLE: INDEPENDENT LINEARITY: END VOLTAGE: VOLTAGE RESOLUTION: OUTPUT SMOOTHNESS: RESISTANCE TEMP. COEFFICIENT: POWER RATING @ 70°C: WIPER CONTACT CURRENT: DIELECTRIC STRENGTH: INSULATION RESISTANCE: 1KΩ, 5KΩ, and 10kΩ 325° 330° MIN. ±1.0% 1.0% MAX. VIRTUALLY INFINITE 0.1% MAX. 400PPM/°C MAX. 0.5 WATT MAX. 10 MilliAmps MAX. 500 VRMS @ 60Hz 100 MegΩ MIN. @ 500VDC AVAILABLE OPTIONS CUSTOM RESISTANCE VALUES (500Ω TO 30kΩ) AND TOLERANCES AS LOW AS ±5% SPECIAL LINEARITIES AS LOW AS 0.25%, ABSOLUTE (INDEXED) OR INDEPENDENT OVER SPECIFIED REGIONS. ADDITIONAL TAP, CURRENT OR VOLTAGE. SPECIAL ELECTRICAL ANGLES UP TO 340° MAX. WIRE LEADS OR CABLE IN PLACE OF TERMINALS STANDARD MECHANICAL CHARACTERISTICS MECHANICAL ROTATION: STARTING TORQUE: RUNNING TORQUE: TOTAL WEIGHT: PILOT RUNOUT: SHAFT RUNOUT: SHAFT END PLAY: SHAFT RADIAL PLAY: LATERAL RUNOUT: INSULATED REAR COVER SPECIAL SHAFT LENGTHS, DIAMETERS AND OTHER FEATURES SUCH AS FLATS, SLOTS, AND STEPS. CONTINUOUS 0.20 Oz.-In. MAX. 0.15 Oz.-In. MAX. 0.5 Oz. MAX. 0.001 In. TIR 0.001 In. TIR 0.003 MAX. 0.001 In. TIR 0.002 In. TIR SPECIAL MOUNTING DIMENSIONS OR FEATURES SUCH AS ANTI-ROTATION LOCATING PINS AND BUSHING FLATS OR SLOTS. SPECIAL ENVIRONMENTAL CAPABILITES SUCH AS MOISTURE SEALS, HIGH SHOCK AND VIBRATION. STANDARD ENVIRONMENTAL CHARACTERISTICS OPERATING TEMP. RANGE: ROTATIONAL OPERATING LIFE: -65°C To +125°C 50 x 10 6 REVOLUTIONS MIN. STANDARD MATERIALS OF CONSTRUCTION HOUSING: SHAFT AND BALL BEARINGS: RESISTANCE ELEMENT: ELECTRICAL CONTACTS: SOLDER TERMINALS: ANODIZED ALUMINUM STAINLESS STEEL CO-MOLDED CONDUCTIVE PLASTIC MULTI-FINGER PRECIOUS METAL GOLD PLATED BRASS ALL OTHER GENERAL REQUIREMENTS IN ACCORDANCE WITH MIL-PRF-39023 Position Sensor Products precisionsensors.meas-spec.com 424 Crown Point Circle, Grass Valley, CA 95945 Ph: 530.273.4608 Fax: 530.273.0769 8-7-13 www.meas-spec.com