35251A Analog Cable Adapter to Tinned Leads Shielded Cable Three-Year Limited Warranty Measurement Specialties, Inc. warrants this product against defects in materials and workmanship for a period of three years from date of shipment. During the warranty period, Measurement Specialties will, at its option, either repair or replace products which prove to be defective. Exclusions This warranty does not apply to defects or damage resulting from: •Improper installation or maintenance •Customer supplied software or interfacing •Unauthorized modification or misuse •Operation outside of the product specifications Limitations The warranty set forth above is exclusive and no other warranty, whether written or oral, is expressed or implied. Measurement Specialties specifically disclaims the implied warranties of merchantability and fitness for a particular purpose. Some jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitation or exclusion may not apply to you. However, any implied warranty of merchantability or fitness is limited to the three-year duration of this written warranty. Measurement Specialties, Inc. 2236 N. Cleveland-Massillon Rd. Akron, Ohio 44333-1255 USA (330) 659-3312 www.meas-spec.com precisionsensors.meas-spec.com Warranty Service To obtain service during the warranty period, products must be returned, transportation prepaid, to Measurement Specialties. 35251A Rev. 8/20/13 How to Use the 35251A 1 2 3 4 Male Adapter Connector ►Insert ► small male connector on cable into mating connector on the side of the 35250A adapter. ►Tie ► the cable down to within six inches of the adapter to provide strain relief. Cable Connections Accelerometer Pin } } Cable Wire Color { { 1 twisted pair 2 3 twisted pair 4 Brown Red Orange Yellow Specifications* Min Typical Max Length 1.22 [4] Temperature -55 +105 Range *Data subject to change without notice. Units m [ft] °C