Snap-In Aluminum Electrolytic Capacitors MUT Series FEATURES • • • • PCB Mounting, Super low profile ( Smaller than MUH) More compact electronic equipment High CV density Load life of 3,000 hours at 105oC SPECIFICATIONS Item Characteristic Operating Temp Range 160V-250V: -40oC to +105oC 350V-450V: -25oC to +105oC Rated Working Voltage Capacitance Tolerance Leakage Current o (20 C) Dissipation Factor o Tanδ (120Hz, 20 C) 160 to 450VDC ±20% (M) O I≤0.02CV or 2mA, whichever is less (at 20 C after 3 minutes) I= Leakage current (μA) C= Nominal capacitance (μF) V= Rated voltage (VDC) Tanδ (120Hz, o 20 C) Low Temperature Characteristics 160 to 250 0.10 350 to 450 0.20 Impedance ratio at 120 Hz WV 160 to 250 350 to 450 Z -25OC/Z 20OC 4 8 Z -40OC/Z 20OC 12 After applying rated working voltage for 3000 hours at 105oC and then being stabilized at +20OC, capacitors shall meet following limits. Capacitance change Within ±20% of the initial value Load Life Tanδ ≤ ±200% of the initial specified value Leakage current ≤ The initial specified value After storage for 1000 hours at 105 oC with no voltage applied and then being stabilized at +20OC, capacitors shall meet following limits. Capacitance change Within ±20% of the initial value Shelf Life Tanδ ≤ 150% of the initial specified value Leakage current ≤ The initial specified value PART NUMBERING SYSTEM MUT 160V 222 M 22X25 DIMENSIONS Meritek Series Voltage Capacitance CODE μF 222 2200 562 5600 153 15000 473 47000 Tolerance - M= ±20% Case size (diameter X length, in mm) RIPPLE CURRENT COEFFICIENT Frequency Freq (Hz) WV (V) 160 to 250 350 to 450 Temperature Temperature Factor 50 0.80 0.84 120 1.0 1.0 o ≤ 45 C 2.40 1K 1.25 1.15 o 60 C 2.20 10K 1.40 1.20 100K 1.50 1.32 o 85 C 1.65 o 105 C 1.00 rev.7a MUT Series Snap-In Aluminum Electrolytic Capacitors 160(2C) W.V(V) Cap (μF) φ 22 φ 25 φ 30 200(2D) φ 35 φ 22 φ 25 φ 30 Series φ 35 φ 22 180 22x25 220 22x30 250(2E) φ 25 φ 30 φ 35 0.78 22x25 270 1.00 25x25 1.00 1.00 22x35 25x30 1.26 1.26 330 22x25 22x30 25x25 22x40 25x30 1.20 1.25 1.25 1.31 1.31 1.31 390 22x30 22x35 25x30 22x45 25x35 30x30 1.44 1.44 1.52 1.52 1.52 470 22x35 25x25 22x40 25x35 30x25 22x50 25x40 30x30 1.47 1.47 1.55 1.55 1.55 1.63 1.63 1.63 1.63 560 22x40 25x30 22x45 25x40 30x30 25x45 30x35 35x30 1.60 1.60 680 22x45 25x35 1.80 1.78 1.78 820 22x50 25x40 30x30 1.33 2.15 30x30 1.65 1.65 1.68 22x50 25x45 30x35 1.87 1.90 1.87 1.90 25x50 30x45 35x35 2.15 1.87 1.87 1.86 35x25 25x50 30x40 35x30 2.25 2.15 2.10 2.10 1000 30x35 35x30 2.36 2.36 2.36 1200 25x50 30x40 35x30 2.63 2.57 2.71 1500 30x45 35x35 2.93 2.57 3.20 1800 30x50 35x45 35x50 3.47 2200 Cap (μF) φ 22 φ 25 φ 30 2.18 35x35 2.20 2.25 2.30 2.30 30x45 35x35 30x50 35x40 2.52 2.52 2.57 30x50 35x40 35x45 2.71 2.73 3.47 3.57 35x50 35X50 3.95 4.25 400(2G) φ 35 2.15 30x45 2.57 35x45 350(2V) W.V(V) 35x25 35x25 25x45 2.63 30x25 φ 22 φ 25 φ 30 450(2W) φ 35 φ 22 φ 25 φ 30 φ 35 22x25 56 0.46 68 22x25 22x30 0.53 0.53 0.53 82 22x30 22x35 25x30 25x25 25x25 0.60 0.60 0.60 0.60 100 22x25 22x35 25x30 22x40 25x30 0.72 0.74 0.74 0.76 0.76 0.76 120 22x30 22x40 25x35 22x45 25x35 30x30 0.78 0.78 0.81 0.88 0.80 0.80 0.80 0.80 150 22x35 25x30 22x45 25x40 30x30 22x50 25x40 30x30 0.86 0.86 180 22x45 25x35 0.99 0.96 0.96 1.13 0.99 0.99 2.00 0.99 220 22x50 25x40 30x30 35x25 25x50 30x35 35x30 25x50 30x40 1.09 1.09 1.07 1.07 1.28 1.13 1.13 1.20 1.20 1.20 270 25x45 30x35 35x30 30x40 35x30 30x45 35x35 1.20 1.20 1.20 330 25x50 30x40 35x35 35x50 1.42 1.42 1.45 30x45 35x40 1.58 1.63 390 22x25 1.42 30x25 1.58 30x25 0.88 0.99 0.88 22x50 25x45 30x30 0.99 0.90 35x25 30x25 0.90 0.90 25x45 30x35 35x30 1.28 1.28 1.30 1.30 30x45 35x35 30x50 35x40 1.47 1.47 1.50 30x50 35x40 1.50 35x45 1.63 1.68 35x45 35x50 1.84 470 35x45 1.80 1.84 560 35x50 35x50 2.05 2.10 o IR : Maxium permissible ripple current [A(rms) at 105 C,120Hz] Case size [φ DxL (mm)] rev.7a