Snap-In Aluminum Electrolytic Capacitors MUL Series FEATURES • • • • • PCB Mounting Long life and excellent stability No derating at high temperature For industrial and commercial application Load life of 5,000 hours at 105oC SPECIFICATIONS Item Characteristic Operating Temp Range 160V-250V: -40oC to +105oC 400V-450V: -25oC to +105oC Rated Working Voltage Capacitance Tolerance Leakage Current o (20 C) Dissipation Factor o Tanδ (120Hz, 20 C) 160 to 450VDC ±20% (M) O I≤0.02CV or 2mA, whichever is less (at 20 C after 5 minutes) I= Leakage current (μA) C= Nominal capacitance (μF) V= Rated voltage (VDC) Tanδ (120Hz, o 20 C) Low Temperature Characteristics 160 to 250 0.10 400 to 450 0.20 Impedance ratio at 120 Hz WV 160 to 250 400 to 450 Z -25OC/Z 20OC 3 8 Z -40OC/Z 20OC 6 After applying rated working voltage for 5000 hours at 105oC and then being stabilized at +20OC, capacitors shall meet following limits. Capacitance change Within ±20% of the initial value Load Life Tanδ ≤ ±300% of the initial specified value Leakage current ≤ The initial specified value After storage for 1000 hours at 105 oC with no voltage applied and then being stabilized at +20OC, capacitors shall meet following limits. Capacitance change Within ±20% of the initial value Shelf Life Tanδ ≤ 150% of the initial specified value Leakage current ≤ The initial specified value PART NUMBERING SYSTEM MUL 160V 222 M 22X25 DIMENSIONS Meritek Series Voltage Capacitance CODE μF 222 2200 562 5600 153 15000 473 47000 Tolerance - M= ±20% Case size (diameter X length, in mm) RIPPLE CURRENT COEFFICIENT Frequency Freq (Hz) WV (V) 160 to 250 400 to 450 Temperature Temperature Factor 50 0.80 0.82 120 1.0 1.0 o ≤ 45 C 2.40 1K 1.25 1.15 o 60 C 2.20 10K 1.40 1.20 100K 1.50 1.32 o 85 C 1.65 o 105 C 1.00 rev.7a MUL Series Snap-In Aluminum Electrolytic Capacitors 160(2C) W.V(V) Cap (μF) φ 22 φ 25 φ 30 180(2D) φ 35 φ 22 φ 25 φ 30 Series φ 35 φ 22 22x25 0.75 22x30 0.80 22x30 0.90 22x35 1.00 22x40 1.15 22x50 1.30 120 25x25 0.80 22x30 0.90 22x35 1.00 22x40 1.15 22x45 1.25 22x50 1.35 150 180 220 270 330 390 470 22x25 0.80 22x30 1.00 22x35 1.10 22x40 1.20 22x45 1.33 22x50 1.47 560 680 25x25 1.00 25x30 1.05 25x30 1.15 25x35 1.30 25x40 1.45 25x45 1.60 25x50 1.80 820 1000 30x25 1.10 30x25 1.20 30x30 1.30 30x30 1.47 30x35 1.60 30x40 1.80 30x45 2.15 30x50 2.55 1200 250(2V) W.V(V) Cap (μF) 35x30 1.60 35x30 1.78 35x35 2.15 35x40 2.55 35x45 2.90 φ 22 φ 25 φ 30 φ 35 56 68 82 120 150 180 220 270 330 390 470 560 680 820 φ 22 22x25 0.40 22x30 0.47 22x35 0.52 22x40 0.59 22x45 0.64 22x50 0.72 47 22x25 0.65 22x30 0.80 22x35 0.90 22x40 1.00 22x45 1.10 25x50 1.22 25x25 0.80 25x30 0.90 25x30 1.00 25x35 1.10 25x40 1.20 25x45 1.37 25x50 1.53 30x25 0.90 30x25 1.00 30x30 1.10 30x30 1.20 30x35 1.35 30x40 1.50 30x45 1.70 30x50 2.10 30x25 1.00 30x25 1.10 30x30 1.20 30x30 1.30 30x35 1.50 30x40 1.70 30x45 1.95 30x50 2.20 35x30 1.50 35x30 1.70 35x35 1.95 35x40 2.20 35x45 2.65 35x50 2.95 400(2G) 39 100 25x25 0.90 25x25 1.00 25x30 1.10 25x35 1.20 25x40 1.30 25x45 1.52 25x50 1.73 35x30 1.35 35x30 1.50 35x35 1.70 35x40 2.10 35x45 2.40 35x50 2.60 φ 25 25x25 0.52 25x30 0.59 25x35 0.62 25x40 0.70 25x45 0.77 25x50 0.85 φ 30 30x25 0.64 30x30 0.70 30x35 0.75 30x40 0.85 30x45 0.90 30x50 1.00 200(2E) φ 25 25x25 0.80 25x25 0.90 25x30 1.00 25x35 1.15 25x40 1.25 25x45 1.40 25x50 1.62 φ 30 30x25 1.00 30x25 1.10 30x30 1.25 30x35 1.40 30x40 1.60 30x45 1.80 30x50 2.10 φ 35 35x25 1.40 35x30 1.60 35x35 1.80 35x40 2.10 35x45 2.40 35x50 2.80 35X60 3.15 450(2W) φ 35 φ 22 22x25 0.46 22x30 0.53 22x35 0.60 22x40 0.76 22x45 0.80 22x50 0.90 35x25 0.75 35x30 0.85 35x35 0.90 35x40 1.00 35x50 1.20 φ 25 25x25 0.53 25x30 0.60 25x30 0.76 25x35 0.80 25x40 0.90 25x45 2.00 25x50 1.20 φ 30 30x25 0.76 30x30 0.80 30x30 0.90 30x35 0.99 30x40 1.20 30x45 1.30 30x50 1.50 φ 35 35x30 1.25 35x35 1.35 35x40 1.55 35x45 1.75 35x50 1.95 o IR : Maxium permissible ripple current [A(rms) at 105 C,120Hz] Case size [φ DxL (mm)] rev.7a