998PI The new 998PI enhances the industry’s leading PIR by offering pet immunity up to 40 lbs. By design, the 998PI offers the same level of versatility, reliability and ease of installation that made the 998 the industry’s motion sensor of choice. FEATURES: • • • • 35’ x 45’ (10.6m x 13.7m) coverage pattern Immune to pets up to 40 lbs. Split-Zone Optics technology EZ-Mount™ features for fast, trouble free installation SPECIFICATIONS: Detection Method: • Passive Infrared Coverage: • Pet Immune Lens, 35 ft. x 45 ft. (10.6m x 13.7m), 90° Detection Zones: • Pet Immune Lens: 30 zones (eight long range, seven over seven intermediate, four over four short range) Pulse Count: • Intermediate or Standard selectable via DIP switch NOTE: Use standard for pet immune applications Detectable Walk Rate: • 0.5 – 10 ft./sec (0.15 – 3m/sec) Mounting Height: • 7.5 ft. nominal (2.3m) Indicator: • Red LED; enabled/disabled via DIP switch PIR Motion Detector Alarm Relay: • Form A, SPST, 90mA@16V DC 15-ohm protective resistor Input Voltage: • 10 - 16 VDC (Voltage reversal makes PIR inoperative) Current: • 18 mA (non-alarm), nominal • 16 mA (alarm), nominal Standby: Power source should be capable of at least four hours of battery standby Operating Temp.: • 14°F to 122°F (-10°C to +50°C) Operating Humidity: • Up to 95% RH (max.), non-condensing Protection Pattern 25' (7.6m) Top View Dimensions: • 2-5/8”W x 4-3/8”H x 2-1/8”D (67mm x 111mm x 54mm) 0 Split-Zone Optics splits each zone into two stacked sub-zones. Each subzone is the same size as the original, but only has about half the sensitivity. To generate an alarm, a target must intercept both sub-zones simultaneously. A human target is sufficiently large enough while pets up to 40 lbs. remain undetected. Small animals only intercept one beam Human targets intercept both beams ALTERNATE COUNT POLARITY EACH ZONE CONSISTS OF 2 FIELDS 25' (7.6m) 10' (3m) 30' 35' (9m) (10.6m) 20' (6m) 30' 35' (9m) (10.6m) Side View 7.5' (2.3m) 0 0 Split-Zone Optics ORDERING: L/998PI/D 20' (6m) Part No. 998PI Description PIR Motion Sensor 10' (3m)