1/22/99 1:09 PM Page 1 motion detector AS 97-09 RX4 GLD DS New ————————— PIR Motion Detector The cure for common performance A SC’s advanced microprocessor technology is setting new standards in motion detection sensors. With our sophisticated event processing techniques, our motion sensors have the power and intelligence to maintain the highest level of detection and false alarm immunity. Immune to small animals, the Rx4GLD readily adapts to any environment. From innovative signal processing technologies to patented Alternate Polarity Quad detection, the Rx4GLD offers an incomparable range of features. Superior sensor design and innovative self-diagnostics ensure the performance and reliability long after installation. ◆ 35 ft. x 45 ft. (10.6m x 13.7m) coverage pattern ◆ Enhanced Rx signal processing with patented AP Quad detection ◆ Immune to small animals up to 45 lbs. ◆ Adapts to environmental disturbances ◆ Dual channel supervision 1/22/99 1:11 PM Page 2 motion detector AS 97-09 RX4 GLD DS New ——————— Specifications ASC ADEMCO SENSOR COMPANY ◆ Enhanced signal processing — Advanced micro-controlled signal analysis — Automatic adaption to environmental disturbances — Advanced dual-slope temperature compensation — Selectable sensitivity — Fast walk rate — Dual channel supervision — Zone locating walk-test mode ◆ Patented Alternate Polarity (AP) Quad detection ◆ Immune to small pets and animals up to 45 lbs. Interchangeable long range/curtain mirror included. Optional pet alley mirror (1875PA) and swivel mount bracket (998SB) available. ◆ Form C relay and tamper. Specifications: Detection Method: Coverage: Detection Pattern: Pulse Processing: Detectable Walk Rate: Mounting Height: Indicators: Alarm Relay: Input Voltage: Current: Operating Temp: Operating Humidity: Dimensions: AP Quad Passive Infrared Standard wide Angle Mirror 35 ft. x 45 ft. (10.6m x 13.7m) Long Range/Curtain Mirror 70 ft. x 10 ft. (21.3m x 3m) Standard mirror: 9 zones (6 long, 3 short) Long Range/Curtain: 1 zone, 7 tiers Standard or Intermediate, Normal or Harsh, selectable via DIP switch 0.5-10 ft. /sec (0.15-3m/sec) 7 ft. (2.1m) nominal Red LED; enabled/disabled via DIP switch Form C 9-16VDC with reverse polarity protection 12mA nominal (non-alarm) 16mA nominal (alarm, LED enabled) -20F to 122F (-29C to +50C) Up to 95%RH (max.), non-condensing 2-5/8"W x 4-3/8"H x 1-7/8"D (67mm x 111mm x 48mm) Protection Patterns TOP VIEW (at 7 ft. [2.1m] Mounting Height) WIDE AREA PATTERN 20 ft. (6m) 10 ft. (3m) 0 10 ft. (3m) 20 ft. (6m) 10 ft. (3m) 30 ft. 35 ft. (9m) (10.7m) SIDE VIEW 7 ft. (2.1m) 3 ft. (9m) 35 ft. (10.7m) 10 ft. (3m) NOTE: THE DETECTION PATTERN OF THE DETECTOR IN THE INVERTED POSITION IS IDENTICAL TO THE PATTERN IN THE NORMAL MOUNTING POSITION EXCEPT THAT THE BEAMS TILT UPWARD CORRIDOR/CURTAIN PATTERN TOP VIEW (at 7 ft. [2.1m] Mounting Height) 3.5 ft. (1m) 10 ft. 3.5 ft. (3m) (1m) SIDE VIEW 7 ft. (2.1m) 2.6 ft. (.8m) 165 Eileen Way, Syosset, New York 11791 • Copyright ©1997 Pittway Corporation 20 ft. (6m) 70 ft. (21.3m)